WTB: RamHorns (Used 4 around $50 Shipped???) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

arkracing · 06-27-2005, 10:21 PM

I'm looking for a set of RamHorn Manifolds for around $50 shipped or less if you are willing to part for just shipping or whatever. It's ok if they need studs - well if the stud are broken flush off with the flange i might not want them. (i.e. I would rather try to heat them and get them out without drilling and tapping if possible, but will drill if i need to)

Also if anyone has the front sections of exahust pipe for the driver & Pass side I would be interested - mainly from the flange until it bends out to head straight back.

Can anyone help??? I would rather run duals than the crappy looking peiced together y-pipe exahust that is on the truck now.

Thanks Guys
PayPal Payment Preferred - I'll pay the fee too, but will do MO if i have to

greenhorn male · 06-27-2005, 10:43 PM

I have some but they are all straight dump; 4x4 application I beleive.

arkracing · 06-27-2005, 10:46 PM

I need the angle back Dumps - RandyC10 Has the Primary Pipes to fit on them so I would like to use those. Thanks though

billsbowtie · 06-27-2005, 10:47 PM

i have a pair also $50.00 shipped i will try to find a pic.

billsbowtie · 06-27-2005, 10:50 PM

these are straight dump.

billsbowtie · 06-27-2005, 10:54 PM

i have the drivers side angle dump $25.00 shipped if you need it.

arkracing · 06-27-2005, 11:03 PM

Quote:

Originally Posted by billsbowtie

i have the drivers side angle dump $25.00 shipped if you need it.

I'd like to try and buy a pair of the angle dumps if i could.

billsbowtie · 06-27-2005, 11:10 PM

ok its here if you need it . bill

arkracing · 06-28-2005, 07:13 AM

TTT for the AM Crowd

arkracing · 06-28-2005, 09:36 PM

TTT anyone. is $50 to low? i'm just poor that's all

**too much stuff** · 06-28-2005, 10:38 PM

I have a pair of angle dumps that will need the studs heated out. Depending on shipping price, i will work with ya. PM me if you want to know more, Eric

indiana jeff · 06-30-2005, 04:42 PM

http://store.yahoo.com/dpstore/repai...-350-5-7l.html

I think www.directauto.com will also get you there.

Prices have gone up a little ($10 ea) since I got mine in the fall. Mine came shipped with some sort of greasy anti-rust protection on them. The dr. side had GM casting # on it, Pass side had been recently ground off.

I either didn't read close enough or was shipped the wrong ones...they came with the ports for AIR injection. I just plugged the hole with some allen head plugs.

They LOOK pretty good. BUT I'm still working on my project and haven't installed them yet.

hope this helps.

tomatocity · 06-30-2005, 09:26 PM

Quote:

Originally Posted by arkracing

I'd like to try and buy a pair of the angle dumps if i could.

what is the outlet size of the center dumps? Looking for a pair of 2.5".

06-27-2005, 10:21 PM	#1
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	WTB: RamHorns (Used 4 around $50 Shipped???) I'm looking for a set of RamHorn Manifolds for around $50 shipped or less if you are willing to part for just shipping or whatever. It's ok if they need studs - well if the stud are broken flush off with the flange i might not want them. (i.e. I would rather try to heat them and get them out without drilling and tapping if possible, but will drill if i need to) Also if anyone has the front sections of exahust pipe for the driver & Pass side I would be interested - mainly from the flange until it bends out to head straight back. Can anyone help??? I would rather run duals than the crappy looking peiced together y-pipe exahust that is on the truck now. Thanks Guys PayPal Payment Preferred - I'll pay the fee too, but will do MO if i have to __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered Last edited by arkracing; 06-27-2005 at 10:27 PM.

06-27-2005, 10:43 PM	#2
greenhorn male Senior Member Join Date: Jan 2003 Location: Bay Area, Northern California Posts: 1,344	I have some but they are all straight dump; 4x4 application I beleive. __________________ 03 Tahoe 72 GMC Super Custom 2500 Custom Camper, my reliable workhorse. Dual gauged tanks, dual battery trays.

06-27-2005, 10:46 PM	#3
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	I need the angle back Dumps - RandyC10 Has the Primary Pipes to fit on them so I would like to use those. Thanks though __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

06-28-2005, 07:13 AM	#9
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	TTT for the AM Crowd __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

06-28-2005, 09:36 PM	#10
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	TTT anyone. is $50 to low? i'm just poor that's all __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

06-27-2005, 10:47 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	i have a pair also $50.00 shipped i will try to find a pic.

06-27-2005, 10:50 PM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	these are straight dump.

06-27-2005, 10:54 PM	#6
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	i have the drivers side angle dump $25.00 shipped if you need it.

06-27-2005, 11:10 PM	#8
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	ok its here if you need it . bill

06-28-2005, 10:38 PM	#11
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	I have a pair of angle dumps that will need the studs heated out. Depending on shipping price, i will work with ya. PM me if you want to know more, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-30-2005, 04:42 PM	#12
indiana jeff Registered User Join Date: Feb 2005 Location: SE Indiana Posts: 3	How about this place? http://store.yahoo.com/dpstore/repai...-350-5-7l.html I think www.directauto.com will also get you there. Prices have gone up a little ($10 ea) since I got mine in the fall. Mine came shipped with some sort of greasy anti-rust protection on them. The dr. side had GM casting # on it, Pass side had been recently ground off. I either didn't read close enough or was shipped the wrong ones...they came with the ports for AIR injection. I just plugged the hole with some allen head plugs. They LOOK pretty good. BUT I'm still working on my project and haven't installed them yet. hope this helps. __________________ 1970 c-10 CST LWB 350/350



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.