Rear Sidemarker - 1969 C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Orange Truck · 07-01-2005, 08:06 PM

My truck came with only original sidemarkers front and rear without lamps. In redoing the truck, I had the front markers replaced with the lamp versions and wired. I replaced the rear sidemarkers with the lamp versions, but have not wired them up yet. Can these be fed into the wiring harness that carries the tail lights and rear bumper license plate lamp? Have not looked, but obviously there has to be some sort of original harness to carry those wires to the front power source. I am an amatuer at these sorts of things.

Longhorn Man · 07-01-2005, 09:03 PM

Yes, run a wire to the tail light harness, tap into the brown wire, that is the tail light wire.

07-01-2005, 08:06 PM	#1
Orange Truck Orange Truck Join Date: Jun 2005 Location: Mount Juliet, Tennessee Posts: 70	Rear Sidemarker - 1969 C10 My truck came with only original sidemarkers front and rear without lamps. In redoing the truck, I had the front markers replaced with the lamp versions and wired. I replaced the rear sidemarkers with the lamp versions, but have not wired them up yet. Can these be fed into the wiring harness that carries the tail lights and rear bumper license plate lamp? Have not looked, but obviously there has to be some sort of original harness to carry those wires to the front power source. I am an amatuer at these sorts of things.

07-01-2005, 09:03 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Yes, run a wire to the tail light harness, tap into the brown wire, that is the tail light wire.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.