Looking for front hub-hub off of 1/2 ton

[a squarecan]

Hey guys,

I am curious if anyone around Portland Oregon Would happen to have a front set-up off a 73-87 they are looking to part with. I have a 64 and looking to do a disk convert. I am willing to piece it together so if you have anything laying around let me know!

Thanks
Keith

[rockman20]

My guess is you are looking for 2WD stuff?

[1FaastC10]

if you were closer, i know where you could pick one up real cheap. shipping would be a huge PITA and costly.

[patgizz]

yeah shipping isnt worth it, i've got a whole setup here in ohio sitting under my 85 c10 parts truck.

[a squarecan]

Sorry for the concusion guys,

I am looking for 1/2 ton 2WD stuff, you are all right shipping isnt worth it. I was just in hopes some one was maybe close enough with something laying around they wanted to sell. I am in no real rush, I will wait to see if anything comes up.

Thanks again guys
Keith

[CG]

front disks started in 71 if that is any help to you.

[a squarecan]

Thanks CG,

I knew that, I just know a lot of 71's still had drums, and manual steering. If anyone has a 71-87 disk set-up Let me know :P All I really need are the A-arms, spindles (not even that important) rotors, calipers, dust shield and all the other stuff that goes a long with it. I started to check parts out and the core charge alone for replacing half the parts will cost me a fortune. It may just be easy for me to go buy new upper and lower Ball joints; replace those. Buy drop spindles, bolt those up and then just find some salvaged dust shield, rotors and calipers. Those are the few items with the biggest core charge. So if any one can help me out and is close to portland let me know.

And hell if anyone is looking to sell some used drop spindles for some strange reason let me know cause the plan is to just buy drop spindles and screw paying for used stock ones.

Thanks again
Keith