1966 GMC Panel Value Question... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mr.W. · 07-06-2005, 05:01 PM

Hi, I have this 66 GMC Panel Truck Project I won't be able to finnish. Could someone give me some advice how much something like that would be worth?

I know what I invested & what it's worth to me, but it would be very helpfull if I had a idea how much it would be fair to sell it for.

It has a 500 cui Cadillac engine & TH400 auto transmission in it. Front disc brakes, power steering & crossmember out of a 1975 Chevrolet 1 ton truck. A 1990 Ford rear end and much more. But it does need a lot of body work & finnishing.

There are more photos & description at:
http://www.misterw.com/GMC/

Demmit_Hemmit's 65 · 07-06-2005, 09:58 PM

with windows down the side you have a suburban..................not sure what it's worth.............need more info............any rust issues.................interior all there???? it also looks like you have a 60-61 hood on it..............barn doors or a lift gate???? i've seen no rust suburbans bring $5,000 to $7,000 dollars........................more info please........hemmit

Mr.W. · 07-07-2005, 09:20 AM

It has barn doors, rust, no interior... there are way more photos & description on: http://www.misterw.com/GMC/

BobS · 07-07-2005, 07:54 PM

It's a Panel with windows added. Does the VIN start with "2503"?

Bob

Mr.W. · 07-07-2005, 07:56 PM

Yes it's: 2503 PF 13033 B

BobS · 07-07-2005, 09:07 PM

That's a 1-ton, not a whole lot of those around.

Bob

Mr.W. · 07-08-2005, 12:30 AM

So what does that mean in terms of value?

Demmit_Hemmit's 65 · 07-08-2005, 02:54 AM

Mr W.............................GREAT STORY WITH LOTS OF PICTURES (I GUESS I ASKED FOR PICTURES DIDN'T I?) HOPE YOU SELL HER.....................HEMMIT

Mr.W. · 07-09-2005, 02:48 AM

Well, I rather would keep her, but I don't see a way of finnishing her soon. So I would like to find out how much she's worth in the shape she's in, so I can make a decission if I should sell her or not.

Mongo · 07-09-2005, 10:37 PM

Well if you cant finnish her "soon" then hold on to her I am guessing that she is not costing you anything to just sit there. I say keep her and do what little you can, and before you know it you will be further along than you are right now.

BobS · 07-11-2005, 11:07 AM

I'd try to hold onto it too, you're not going to get much for it the way it is. Most people are leary of spending a lot of money on someone else's project. I'm thinking you would get $1-2000 for it but I could be wrong.

Bob

Mr.W. · 07-12-2005, 06:45 AM

Thank you for the replies!

I'm worried that I run out of storage & end up selling her in a hurry. The junkyard will give me always 500 bucks, but I don't want her to get trashed!
So I rather put her up for sale now & only if I don't get good offers I keep her.
Better knowing she's in good hands & $2000 in my pocket, then risking the chrusher...

Let's see what happens... & thanks again!

07-06-2005, 05:01 PM	#1
Mr.W. Registered User Join Date: Jul 2005 Location: Arizona Posts: 12	1966 GMC Panel Value Question... Hi, I have this 66 GMC Panel Truck Project I won't be able to finnish. Could someone give me some advice how much something like that would be worth? I know what I invested & what it's worth to me, but it would be very helpfull if I had a idea how much it would be fair to sell it for. It has a 500 cui Cadillac engine & TH400 auto transmission in it. Front disc brakes, power steering & crossmember out of a 1975 Chevrolet 1 ton truck. A 1990 Ford rear end and much more. But it does need a lot of body work & finnishing. There are more photos & description at: http://www.misterw.com/GMC/

07-07-2005, 07:54 PM	#4
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 568	It's a Panel with windows added. Does the VIN start with "2503"? Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

07-07-2005, 09:07 PM	#6
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 568	That's a 1-ton, not a whole lot of those around. Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

07-09-2005, 10:37 PM	#10
Mongo YES_____NO Join Date: Jul 1999 Location: Somewhere in the vicinity of betelgeuse Posts: 7,351	Well if you cant finnish her "soon" then hold on to her I am guessing that she is not costing you anything to just sit there. I say keep her and do what little you can, and before you know it you will be further along than you are right now. __________________ People many not remember what you said or what you did, but they will remember the way you made them feel. - unknown Cause, remember: no matter where you go... there you are. - Buckaroo Banzai 1984 Help support the board

07-11-2005, 11:07 AM	#11
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 568	I'd try to hold onto it too, you're not going to get much for it the way it is. Most people are leary of spending a lot of money on someone else's project. I'm thinking you would get $1-2000 for it but I could be wrong. Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

07-06-2005, 09:58 PM	#2
Demmit_Hemmit's 65 Senior Member Join Date: Mar 2002 Location: Peru, Indiana Posts: 741	with windows down the side you have a suburban..................not sure what it's worth.............need more info............any rust issues.................interior all there???? it also looks like you have a 60-61 hood on it..............barn doors or a lift gate???? i've seen no rust suburbans bring $5,000 to $7,000 dollars........................more info please........hemmit

07-07-2005, 09:20 AM	#3
Mr.W. Registered User Join Date: Jul 2005 Location: Arizona Posts: 12	It has barn doors, rust, no interior... there are way more photos & description on: http://www.misterw.com/GMC/

07-07-2005, 07:56 PM	#5
Mr.W. Registered User Join Date: Jul 2005 Location: Arizona Posts: 12	Yes it's: 2503 PF 13033 B

07-08-2005, 12:30 AM	#7
Mr.W. Registered User Join Date: Jul 2005 Location: Arizona Posts: 12	So what does that mean in terms of value?

07-08-2005, 02:54 AM	#8
Demmit_Hemmit's 65 Senior Member Join Date: Mar 2002 Location: Peru, Indiana Posts: 741	Mr W.............................GREAT STORY WITH LOTS OF PICTURES (I GUESS I ASKED FOR PICTURES DIDN'T I?) HOPE YOU SELL HER.....................HEMMIT

07-09-2005, 02:48 AM	#9
Mr.W. Registered User Join Date: Jul 2005 Location: Arizona Posts: 12	Well, I rather would keep her, but I don't see a way of finnishing her soon. So I would like to find out how much she's worth in the shape she's in, so I can make a decission if I should sell her or not.

07-12-2005, 06:45 AM	#12
Mr.W. Registered User Join Date: Jul 2005 Location: Arizona Posts: 12	Thank you for the replies! I'm worried that I run out of storage & end up selling her in a hurry. The junkyard will give me always 500 bucks, but I don't want her to get trashed! So I rather put her up for sale now & only if I don't get good offers I keep her. Better knowing she's in good hands & $2000 in my pocket, then risking the chrusher... Let's see what happens... & thanks again!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.