07-07-2005, 11:35 PM | #1 |
Registered User
Join Date: Feb 2005
Location: Northeast TX
Posts: 58
|
Vacuum hoses
Anybody have a diagram of the vacuum hoses for a 72? I am trying to get the "blend door" to close so I don't have a heater blowing while I am going down the road. None of my controls seem to do anything, except the blower motor switch. I know there are two hoses going in the cab. I assume one goes to the carb (ported or manifold vacuum?) and the other goes to the diaphragm. Anyone else done this?
Thanks in advance.
__________________
Why do we drive on a parkway and park on a driveway? Last edited by hot!rod; 07-07-2005 at 11:36 PM. |
07-08-2005, 12:39 AM | #2 |
Registered User
Join Date: May 2000
Location: Storm Lake, Ia
Posts: 1,449
|
Is this what you are looking for?
__________________
|
07-08-2005, 12:45 AM | #3 |
Registered User
Join Date: Feb 2005
Location: Northeast TX
Posts: 58
|
Exactly!!! The only thing I see is I don't have a "vacuum reservoir" (I don't think). And I don't think I have a water valve. I have a cable that goes out there I assume to a valve. I need to locate the inside door. I didn't know there was one.
Thanks a million!!!
__________________
Why do we drive on a parkway and park on a driveway? |
07-08-2005, 12:57 AM | #4 |
Registered User
Join Date: May 2000
Location: Storm Lake, Ia
Posts: 1,449
|
Does this help then?
__________________
|
07-08-2005, 11:59 AM | #5 |
Registered User
Join Date: Feb 2005
Location: Northeast TX
Posts: 58
|
Yep that's it. Is there any way you could post a close up of Figures 43 and 44? I hate to trouble you, but I can't blow them up much without making them blurry. Anyway, thanks again that is exactly what I needed to see. I can't believe others haven't needed to see this.
Thanks again.
__________________
Why do we drive on a parkway and park on a driveway? |
07-08-2005, 01:38 PM | #6 |
Registered User
Join Date: May 2000
Location: Storm Lake, Ia
Posts: 1,449
|
I have blow up of one of the pics
tried to email because to big to post, but your email won't allow from board If you want pic email me and I will reply it back solver@evertek.net
__________________
Last edited by Solver; 07-08-2005 at 01:39 PM. |
Bookmarks |
|
|