F/s 89 3/4 4x4 Suburban Frame Or Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

qksilver · 07-16-2005, 07:43 PM

1989 3/4 4X4 Suburban frame or brackets, cross members etc.
Engine cross member and brackets $70.00
any other parts, spring perches, front crossmember etc no charge except for labor to remove.
I am going keep the 2 rear crossmembers next to the
gas tank.

or sell whole bare frame, everything that is rivited to it and engine crossmember for $125.00
pickup, as far as shipping will work with the buyer any way I can.

Located in Southern Pines NC, 8 miles west of Fort Bragg.
Pm if interested, Thanks,
Steve

meathead95 · 07-16-2005, 08:50 PM

i need the part of the frame horn where the ps box mounts to about 3" on each side of the bolts

qksilver · 07-16-2005, 10:12 PM

No problem, I need to get my tanks filled so I can cut. i won't be able to do that untill Tues. Can you PM me to remind me Monday?
Thanks,
Steve

qksilver · 07-17-2005, 11:53 AM

Ttt

meathead95 · 07-17-2005, 03:15 PM

yeah ill pm yah

HeavyK20 · 07-19-2005, 03:20 PM

I need the cross member that goes between the forward spring hangers on the rear axle. Not sure if it is the same as a truck though, I would need a picture to verify.

qksilver · 07-19-2005, 06:20 PM

check and see, I am getting my tanks filled, was going to be today but will be tomorrow
Steve

07-16-2005, 07:43 PM	#1
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	F/s 89 3/4 4x4 Suburban Frame Or Parts 1989 3/4 4X4 Suburban frame or brackets, cross members etc. Engine cross member and brackets $70.00 any other parts, spring perches, front crossmember etc no charge except for labor to remove. I am going keep the 2 rear crossmembers next to the gas tank. or sell whole bare frame, everything that is rivited to it and engine crossmember for $125.00 pickup, as far as shipping will work with the buyer any way I can. Located in Southern Pines NC, 8 miles west of Fort Bragg. Pm if interested, Thanks, Steve

07-16-2005, 08:50 PM	#2
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	i need the part of the frame horn where the ps box mounts to about 3" on each side of the bolts __________________ 72 2wd blazer 72 swb 4x4

07-17-2005, 03:15 PM	#5
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	yeah ill pm yah __________________ 72 2wd blazer 72 swb 4x4

07-19-2005, 03:20 PM	#6
HeavyK20 Registered User Join Date: Dec 2001 Location: New Richmond, WI Posts: 547	I need the cross member that goes between the forward spring hangers on the rear axle. Not sure if it is the same as a truck though, I would need a picture to verify. __________________ Eric 1969 K20, 465/205 package Last edited by HeavyK20; 07-19-2005 at 03:21 PM.

07-16-2005, 10:12 PM	#3
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	No problem, I need to get my tanks filled so I can cut. i won't be able to do that untill Tues. Can you PM me to remind me Monday? Thanks, Steve

07-17-2005, 11:53 AM	#4
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Ttt

07-19-2005, 06:20 PM	#7
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	check and see, I am getting my tanks filled, was going to be today but will be tomorrow Steve



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.