TH350/NP205 - near Dallas, TX - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djohnson · 07-18-2005, 10:14 AM

TH350
This transmission came out of a 78 K5 Blazer. It is the “K” case and includes the heavy cast dust cover and engine braces. It also includes a B&M Traveler torque converter (RV/Towing converter) and stainless steel cooler lines. It has a Transgo reprogramming kit in it. It was rebuilt by North Texas Transmissions in Arlington, TX.

NP205
The transfer case came out of an early Jimmy (1970?). It was rebuilt by Standard Transmission & Gear in Ft. Worth, TX with all new bearings and seals. I have 2 shift levers for it – 1 for a 78 K5 (purchased new from GM and powder coated black) and the original shifter for an early Jimmy (also powder coated black). Almost new polyurethane transmission mounts are also included.

I have a tilt steering column that I can include as well (I can’t find the key for it though).

Both transmission and transfer case have very low miles since rebuild (less than 3000) and are in excellent condition. I am selling because I have decided to completely change directions on my project (from 350/TH350/NP205 to 454/SM465/NP205). I am asking $575 OBO. I am located near the Dallas, TX area, and would prefer not to ship.

I will consider trades - looking for big block parts.

CHEVYJEFF · 07-22-2005, 11:12 AM

Would you sell the t.c sperate

JonnyTechMech · 07-22-2005, 01:55 PM

How much would you sell the Tilt Steering column separately? Do you have pic? and what year is it.

djohnson · 07-22-2005, 02:57 PM

I think that I have a buyer for the complete package. If it does not work out, I will consider selling just parts.

plumbcut · 07-25-2005, 11:06 PM

that trans/t-case is a nice looking, clean setup... you shouldnt have a problem finding a taker!

07-18-2005, 10:14 AM	#1
djohnson Registered User Join Date: Jan 2005 Location: Wylie, TX Posts: 41	TH350/NP205 - near Dallas, TX TH350 This transmission came out of a 78 K5 Blazer. It is the “K” case and includes the heavy cast dust cover and engine braces. It also includes a B&M Traveler torque converter (RV/Towing converter) and stainless steel cooler lines. It has a Transgo reprogramming kit in it. It was rebuilt by North Texas Transmissions in Arlington, TX. NP205 The transfer case came out of an early Jimmy (1970?). It was rebuilt by Standard Transmission & Gear in Ft. Worth, TX with all new bearings and seals. I have 2 shift levers for it – 1 for a 78 K5 (purchased new from GM and powder coated black) and the original shifter for an early Jimmy (also powder coated black). Almost new polyurethane transmission mounts are also included. I have a tilt steering column that I can include as well (I can’t find the key for it though). Both transmission and transfer case have very low miles since rebuild (less than 3000) and are in excellent condition. I am selling because I have decided to completely change directions on my project (from 350/TH350/NP205 to 454/SM465/NP205). I am asking $575 OBO. I am located near the Dallas, TX area, and would prefer not to ship. I will consider trades - looking for big block parts. Attached Images Last edited by djohnson; 07-19-2005 at 09:05 AM.

07-22-2005, 11:12 AM	#2
CHEVYJEFF Registered User Join Date: Oct 2002 Location: WYLIE TEXAS Posts: 232	Would you sell the t.c sperate __________________ http://members.cardomain.com/chevyjeff 57 2 DOOR HDTP 82 CORVETTE 90 V10 BLAZER 97 REGAL LSR 2100 (BOAT)

07-22-2005, 01:55 PM	#3
JonnyTechMech STOP! Hamma time!!! Join Date: Feb 2005 Location: Dallas TX. Posts: 145	How much would you sell the Tilt Steering column separately? Do you have pic? and what year is it. __________________ Plan your work and work your plan!!!, or pitty da fool!! 87 GMC BaseTrim, 305 under the wrench/TH400/ 92 Chevy 1500, 350,TH700R4 sittin on dubs

07-22-2005, 02:57 PM	#4
djohnson Registered User Join Date: Jan 2005 Location: Wylie, TX Posts: 41	I think that I have a buyer for the complete package. If it does not work out, I will consider selling just parts.

07-25-2005, 11:06 PM	#5
plumbcut california fill Join Date: Apr 2004 Location: Sunny So-Cal Posts: 694	that trans/t-case is a nice looking, clean setup... you shouldnt have a problem finding a taker!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.