Random Parts $ Sale: AutoMeter - The 1947 - Present Chevrolet & GMC Truck Message Board Network

arkracing · 07-25-2005, 09:04 PM

Couple of Random Parts for sale:

1 AutoMeter Pro-Comp Liquid Filled Oil Pressure Guage (0-100psi) The bezel has normal wear and tear on it - scratched etc. these run about $48 in the Mail Order Speed Shop books.
$25 Shipped

Small Block Motor Mount Stands: Good Condition, Original Bolts Included
$35 Shipped

1 Set of Green/Olive Visors. Passenger side is in Good Condition - needs a good laquer thinner cleanning
Driver side: threads are starting to fray a little @ the seam and it has 2 small tears where the rod goes through. Good for a daily driver or whatever...
Free + Shipping otherwise they will get thrown away

Reply here 1st to avoid confusion with other members.
No Paypal on this stuff guys...sorry

RicksTrucks · 07-25-2005, 09:41 PM

Questions on the oil pressure guage. This will fit our bezels? I have been told that I need the 80psi instead of the stock 60, so should this work. Does this hook up the same as the stock one does? You take PayPal?

arkracing · 07-26-2005, 07:41 AM

RicksTruck -

Not sure if I understand. But the Guage will hook up to the same oil pressure line as your stock guage (as it is a "mechanical guage"...meaning that the actual oil goes into the guage to make the reading instead of an electrical sender that is in the engine block. Usually these mechanical guages are more accurate than electrical ones.

as far as fitting into the stock bezel...I'm going to say NO the guage is 2 + 5/8" in diameter. I'm pretty sure you would have to cut your bezel to get it in there. It also would look kinda funny as it would probably stick out of your bezel and if you didn't have a matching set of guages it would look out of place.

No PayPay right Now...Sorry

RicksTrucks · 07-26-2005, 07:43 AM

thanks, I will pass on the guage then.

07-25-2005, 09:04 PM	#1
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	Random Parts $ Sale: AutoMeter Couple of Random Parts for sale: 1 AutoMeter Pro-Comp Liquid Filled Oil Pressure Guage (0-100psi) The bezel has normal wear and tear on it - scratched etc. these run about $48 in the Mail Order Speed Shop books. $25 Shipped Small Block Motor Mount Stands: Good Condition, Original Bolts Included $35 Shipped 1 Set of Green/Olive Visors. Passenger side is in Good Condition - needs a good laquer thinner cleanning Driver side: threads are starting to fray a little @ the seam and it has 2 small tears where the rod goes through. Good for a daily driver or whatever... Free + Shipping otherwise they will get thrown away Reply here 1st to avoid confusion with other members. No Paypal on this stuff guys...sorry Attached Images __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

07-25-2005, 09:41 PM	#2
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Questions on the oil pressure guage. This will fit our bezels? I have been told that I need the 80psi instead of the stock 60, so should this work. Does this hook up the same as the stock one does? You take PayPal? __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

07-26-2005, 07:41 AM	#3
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	RicksTruck - Not sure if I understand. But the Guage will hook up to the same oil pressure line as your stock guage (as it is a "mechanical guage"...meaning that the actual oil goes into the guage to make the reading instead of an electrical sender that is in the engine block. Usually these mechanical guages are more accurate than electrical ones. as far as fitting into the stock bezel...I'm going to say NO the guage is 2 + 5/8" in diameter. I'm pretty sure you would have to cut your bezel to get it in there. It also would look kinda funny as it would probably stick out of your bezel and if you didn't have a matching set of guages it would look out of place. No PayPay right Now...Sorry __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

07-26-2005, 07:43 AM	#4
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	thanks, I will pass on the guage then. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.