Short fleet and step bed for parts and misc stuff f/s

[muddyole 69]

I am cleaning up the stash what I have is a rusty short step bed that has a good headboard decent wood floor runners wood is shot tailgate is rusty but would work for a beater the chains and hooks are in good shape fenders were from arizona but have rusted on the inner lip and bottoms of the fenders steps are really nice with no rust will sell whole or part prefer whole for 100 bucks

I also have a super nice fleet bed from alabama 500 and the ride or will help with delivery within a couple hundred miles for gas money

also have the spacer that goes under air cleaner with tube that goes over to the valve cover 20 and shipping

steel radiator upper hose minor rust on one end used on my truck til last week 15 and shipping

5 lug front end conversion 75 and you can come and get it all or will ship at your expense

standard bore 350 block 4 bolt main 010/020 high nickle block 125 and the ride

th 350 core 35 and ride

th 350 xfer case out of 78 1/2 ton pretty sure its a 203 with shift linkages and adapter 100 and ride

1965 283 shortblock out of a truck 50 and the ride

70-71 chevy grill and surround driver quality 60 and the ride

door hinges off 71 blazer pass lower is loose 15 and the ride

glove box door off same blazer 10 and the ride

knobs off factory am free if you want to pay shipping (gone)

dana 60 14 bolt ff 4.10 gears have frame for 80 K 30 1200 all

thats all I can think of off the top of my head let me know if you can use any of this stuff I can get pics but work nights and am a bit slow about getting pics so please bear with me thanks mike

[GMC Jim]

can use the knobs from the AM radio... shipping to zip 97233 ? and thanks

[.030over]

I'll be first in line on the short fleet bed pending better description of condition and pictures. I am near Baltimore and would come pick it up.
Scott

PMd ya!

[arkracing]

1st in line If you decide to part the step bed I would like:

The front Stake Pockets (Just cut the sides of the bed down with a sawzall or whatever)
and the Cross Sills including the rear if it isn't all rotted.
and the rear taillight wiring harness if it is still in decent shape.
and the steps

Price + Shipping to 06040 and Pictures if you decide to go that route

Let me know
Thanks,
Andy

[bowtie]

next in line for the bed, also pending pics

[muddyole 69]

Short Fleet : guys I will get pics tomorrow and post in the evening when I get up 4 work thanks MIke

Short Step: would like to try to sell whole but you are first in line Mike

Knobs : Will get a quote and pm you Mike

[byrd]

3rd for the bed and I would come and get it Randy

[muddyole 69]

Shortbed pics first come first serve on this thanks Mike

[muddyole 69]

round 2

[muddyole 69]

more

[muddyole 69]

last ones

[.030over]

Thanks for the pics Mike. A little too much surface rust for me. I have had some bad experiences with the stuff! ...Pass to you Bowtie.

Scott

[muddyole 69]

The surface rust is not pitting and I could've easily scuffed with 220 primed and no one would ever question it, however I am not willing to hide anything to make a sale it is certainly your call and I respect your decision and quick answer next person in line please let me know thanks Mike **************************************************************************************************** **********************************************************************
BTW the wheels are for sale as well off early wagoneer all 4 nice shape no caps 80 and the ride thanks Mike

[bowtie]

thanks muddyole 69 for the pics, I'll also take a pass.

[muddyole 69]

Bowtie passed Randy you are up let me know Mike

[byrd]

I will have to pass as well, thanks again for the pics, Randy

[jims69]

muddyole69. hows about $400 and I pick it up for the SWB bed. If anyone is in front of me proceed if not let me know.

[muddyole 69]

pm sent

[jims69]

I'll try to give you a call around noon today.

[muddyole 69]

ttt

[arkracing]

PM Returned