Stuff for sale--402, Blazer tops, etc. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Huck · 07-30-2005, 08:11 AM

Have a 71 Chevelle 402 BB needing rebuild--$450.
*Single and double wall Blazer tops for sale $250. ea.
*Hatches complete needing repair $150.
*A set of 69-72 Truck/Blazer Buckets need recovering $300.
*A 71--350 short block (.010 code) needing rebuild $100.
*A 55 Chev 3speed OVERDRIVE transmission ---seems ok but operating condition unknown $450.
*1970 Truck rear--308 open--6lug coil--$100.
*1972 Blazer front and rear assemblies--308 gears--posi rear--both $ 350.

Local pickup only~~~$$$ talks>>BS Walks~~~~!
Can arrange delivery to the Louisville Street Rod Nationals this coming week. Huck

meathead95 · 07-30-2005, 09:13 AM

whatare the dates on the louisville show? tell me about the o.d trans I have neverseen one before

Huck · 07-30-2005, 09:27 AM

The show is Thursday the 4th through Sunday the 7th. Expecting over 10,000 street rods and many of the owners also have muscle cars, classic trucks etc.
The 3speed overdrive was an option in the 50's and early 60's. It looks like a normal car/truck 3 speed trans but it also has some electronic/mechanical thingies that allow you to pull a lever on the dash that put's it into overdrive. They were availalbe on most vehicles--chev, ford, chrysler, jeep, etc. In overdrive, you were getting a lower rpm and when you took your foot off of the gas, you were in free wheeling. They are pretty strong and didn't have many problems given reasonable maintenance. They were also available on 67-72 trucks but were not very popular given the advances in automatic transmissions (turbo 350 was bulletproof verses powerglide 2spd). The price of gas having been $.20 a gal--was not a motivator to most people to buy the overdrive units back then.

70short/step · 07-30-2005, 10:12 AM

Yeah a friends Dad had a 62 chevy biscayne station wagon with the overdrive like yours. It was the only one I have ever seen!

vtblazer · 07-30-2005, 11:12 AM

I think I'll be in NJ soon, is that local enough?

Too bad, I'd like that single walled top.

I'll bring the blazer quarter with me.

**tnblazerk5** · 07-30-2005, 11:51 AM

Quote:

Originally Posted by vtblazer

I think I'll be in NJ soon, is that local enough?

Too bad, I'd like that single walled top.

I'll bring the blazer quarter with me.

hey vt if the top can get here ,your more than welcome to store the top here till ya can get down to get it

**Don Brace** · 07-30-2005, 01:01 PM

My 55 and 56 Nomads have three speed overdrives. In third gear and the overdrive engaged the ratio is .7 to 1. Cars get around 23 MPG.

Swbman · 07-30-2005, 02:31 PM

Do you have any pictures of the chevelle motor,is the long block,complete motor with brackets,carb,etc. Do you have any numbers for block,heads,intake etc.

vtblazer · 07-30-2005, 08:03 PM

Quote:

Originally Posted by tnblazerk5

hey vt if the top can get here ,your more than welcome to store the top here till ya can get down to get it

What do ya think Huck? Any chance?

Huck · 08-01-2005, 08:39 AM

ttt

07-30-2005, 08:11 AM	#1
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Stuff for sale--402, Blazer tops, etc. Have a 71 Chevelle 402 BB needing rebuild--$450. Single and double wall Blazer tops for sale $250. ea. Hatches complete needing repair $150. A set of 69-72 Truck/Blazer Buckets need recovering $300. A 71--350 short block (.010 code) needing rebuild $100. A 55 Chev 3speed OVERDRIVE transmission ---seems ok but operating condition unknown $450. 1970 Truck rear--308 open--6lug coil--$100. *1972 Blazer front and rear assemblies--308 gears--posi rear--both $ 350. Local pickup only~~~$$$ talks>>BS Walks~~~~! Can arrange delivery to the Louisville Street Rod Nationals this coming week. Huck

07-30-2005, 09:13 AM	#2
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	whatare the dates on the louisville show? tell me about the o.d trans I have neverseen one before __________________ 72 2wd blazer 72 swb 4x4

07-30-2005, 09:27 AM	#3
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	stuff The show is Thursday the 4th through Sunday the 7th. Expecting over 10,000 street rods and many of the owners also have muscle cars, classic trucks etc. The 3speed overdrive was an option in the 50's and early 60's. It looks like a normal car/truck 3 speed trans but it also has some electronic/mechanical thingies that allow you to pull a lever on the dash that put's it into overdrive. They were availalbe on most vehicles--chev, ford, chrysler, jeep, etc. In overdrive, you were getting a lower rpm and when you took your foot off of the gas, you were in free wheeling. They are pretty strong and didn't have many problems given reasonable maintenance. They were also available on 67-72 trucks but were not very popular given the advances in automatic transmissions (turbo 350 was bulletproof verses powerglide 2spd). The price of gas having been $.20 a gal--was not a motivator to most people to buy the overdrive units back then.

07-30-2005, 10:12 AM	#4
70short/step Registered User Join Date: Dec 2003 Location: Stockton, CA Posts: 1,579	Yeah a friends Dad had a 62 chevy biscayne station wagon with the overdrive like yours. It was the only one I have ever seen! __________________ For every person with a spark of genius, There are a hundred with ignition trouble. 70 Short/Step

07-30-2005, 01:01 PM	#7
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	My 55 and 56 Nomads have three speed overdrives. In third gear and the overdrive engaged the ratio is .7 to 1. Cars get around 23 MPG. __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.

07-30-2005, 11:12 AM	#5
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	I think I'll be in NJ soon, is that local enough? Too bad, I'd like that single walled top. I'll bring the blazer quarter with me.

07-30-2005, 02:31 PM	#8
Swbman Senior Member Join Date: Mar 2004 Location: Tulsa,Oklahoma Posts: 606	Do you have any pictures of the chevelle motor,is the long block,complete motor with brackets,carb,etc. Do you have any numbers for block,heads,intake etc.

08-01-2005, 08:39 AM	#10
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	ttt



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.