New or Custom Gauge cluster for 64 GMC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ChadMorris · 08-05-2005, 12:08 AM

Does anyone make the gauge cluster insert for a 1964 GMC. I would like to
change over to a Billet insert, but all I have seen are made for the Chevy's,
and unfortunately they don't swap out

I could try and make one myself, just thought I would see if I could save myself some trouble.....and a few broke fingers....burns from the machining..
eye trouble from looking at it too close.....you get the picture

Help!

thanks.......

6066gmcguy · 08-05-2005, 08:32 PM

This Subject was covered about a week or two ago, See This Link, that should get you the info your looking for....

ChadMorris · 08-05-2005, 11:23 PM

Thanks for the help, that gives me a couple of options.....

whughes151 · 08-09-2005, 04:43 AM

A nice looking setup this company offers. You can see a finished dash posted by Vortex of Pain. He is a memeber here, and has a sweet 64 GMC. (With photos!!)

http://www.boeseengineering.com/prod...66GMCTruck.htm

whughes151 · 08-09-2005, 04:49 AM

I forgot to put the address for Pian's photos. Sorry 'bout that...

http://hometown.aol.com/charcancel/index.html

08-05-2005, 12:08 AM	#1
ChadMorris Newbie truck Rebuilder! Join Date: Dec 2004 Location: Huntsville, Al Posts: 160	New or Custom Gauge cluster for 64 GMC Does anyone make the gauge cluster insert for a 1964 GMC. I would like to change over to a Billet insert, but all I have seen are made for the Chevy's, and unfortunately they don't swap out I could try and make one myself, just thought I would see if I could save myself some trouble.....and a few broke fingers....burns from the machining.. eye trouble from looking at it too close.....you get the picture Help! thanks....... __________________ "Old Blue" 1964 GMC Fleetside in pieces 350 TPI with 700R4 tranny now installed( well kinda propped in place until the tranny crossmember is bolted in !!!!! 1995 Toyota 4runner , 197,000 miles and going... 2007 Honda Odyssey Van (Wifes car)

08-05-2005, 08:32 PM	#2
6066gmcguy Registered User Join Date: Jul 2005 Location: Northern Utah Posts: 134	This Subject was covered about a week or two ago, See This Link, that should get you the info your looking for.... __________________ Jolly ~ The 6066 GMC Guy Try the 6066 GMC Guy Facebook Page Jolly's Truck & Car Show Page!

08-05-2005, 11:23 PM	#3
ChadMorris Newbie truck Rebuilder! Join Date: Dec 2004 Location: Huntsville, Al Posts: 160	Thanks for the help, that gives me a couple of options..... __________________ "Old Blue" 1964 GMC Fleetside in pieces 350 TPI with 700R4 tranny now installed( well kinda propped in place until the tranny crossmember is bolted in !!!!! 1995 Toyota 4runner , 197,000 miles and going... 2007 Honda Odyssey Van (Wifes car)

08-09-2005, 04:43 AM	#4
whughes151 Registered User Join Date: Oct 2003 Location: Aberdeen, SD Posts: 15	You might try these guys. A nice looking setup this company offers. You can see a finished dash posted by Vortex of Pain. He is a memeber here, and has a sweet 64 GMC. (With photos!!) http://www.boeseengineering.com/prod...66GMCTruck.htm

08-09-2005, 04:49 AM	#5
whughes151 Registered User Join Date: Oct 2003 Location: Aberdeen, SD Posts: 15	Vortex of Pain Pics. I forgot to put the address for Pian's photos. Sorry 'bout that... http://hometown.aol.com/charcancel/index.html



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.