WTB: Metal Radiator Pipe - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72 Cheyenne K20 · 08-05-2005, 10:56 PM

I'm looking for the upper metal radiator pipe for my 72' blazer. If anyone wants to sell one let me know cost and shipping to 55060.

Thanks, Scott

GMC AMI · 08-06-2005, 06:14 AM

Quote:

Originally Posted by 72 Cheyenne K20

I'm looking for the upper metal radiator pipe for my 72' blazer. If anyone wants to sell one let me know cost and shipping to 55060.

Thanks, Scott

20 dollars shipped!

LUV2XCLR8 · 08-06-2005, 08:17 AM

IF HE DOESN'T WANT IT I DO

72 Cheyenne K20 · 08-06-2005, 06:25 PM

Hey Mike, 20 shipped sounds good. I will include it with the money order for the rally rims. I'm also looking for an upper alternator bracket for a 350, thermostat housing (part # 3877660) that connects to the intake manifold, and an oil dip stick for a 4x4 motor. If you have any of these please let me know.

Thanks, Scott

GMC AMI · 08-07-2005, 05:52 AM

Quote:

Originally Posted by 72 Cheyenne K20

Hey Mike, 20 shipped sounds good. I will include it with the money order for the rally rims. I'm also looking for an upper alternator bracket for a 350, thermostat housing (part # 3877660) that connects to the intake manifold, and an oil dip stick for a 4x4 motor. If you have any of these please let me know.

Thanks, Scott

Hey Scott, which side for the alt. bracket? I have a lot of goose necks for the thermostat and I will check the #'s. Do you need both the dip stick and the tube that goes into the block? Thanks. Mike

72 Cheyenne K20 · 08-07-2005, 01:09 PM

Hi Mike, the bracket is for the left (drivers) side of the motor. I know that they made the goose necks with the part # stamped on the base and the neck. I need the one stamped on the neck if you have it. I just need the stick. I have the tube that has the bracket that connects to the drivers side exhaust manifold. The stick should be about 25 and a half inches long not including the handle.

Thanks for your help Mike, Scott

GMC AMI · 08-10-2005, 05:50 AM

Quote:

Originally Posted by 72 Cheyenne K20

Hi Mike, the bracket is for the left (drivers) side of the motor. I know that they made the goose necks with the part # stamped on the base and the neck. I need the one stamped on the neck if you have it. I just need the stick. I have the tube that has the bracket that connects to the drivers side exhaust manifold. The stick should be about 25 and a half inches long not including the handle.

Thanks for your help Mike, Scott

Sorry Scott, I was busy ending my hay season. I will send the stick for free with the metal hose. I looked for the alt. bracket and I do not have one left.
The goosenecks I found did not have a # stamped that I could see. You might want to repost on these items. Mike

72 Cheyenne K20 · 08-10-2005, 07:57 PM

Thanks for all your help Mike, I will get a money order in the mail for you first thing in the morning.

Thanks, Scott

GMC AMI · 08-11-2005, 05:52 AM

Thank you Scott!

08-05-2005, 10:56 PM	#1
72 Cheyenne K20 Registered User Join Date: Feb 2003 Location: Staunton, Virginia Posts: 554	WTB: Metal Radiator Pipe I'm looking for the upper metal radiator pipe for my 72' blazer. If anyone wants to sell one let me know cost and shipping to 55060. Thanks, Scott

08-06-2005, 08:17 AM	#3
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,474	IF HE DOESN'T WANT IT I DO __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

08-11-2005, 05:52 AM	#9
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	Thank you Scott! __________________ 1968 Chevy 4x4 307 4 speed

08-06-2005, 06:25 PM	#4
72 Cheyenne K20 Registered User Join Date: Feb 2003 Location: Staunton, Virginia Posts: 554	Hey Mike, 20 shipped sounds good. I will include it with the money order for the rally rims. I'm also looking for an upper alternator bracket for a 350, thermostat housing (part # 3877660) that connects to the intake manifold, and an oil dip stick for a 4x4 motor. If you have any of these please let me know. Thanks, Scott

08-07-2005, 01:09 PM	#6
72 Cheyenne K20 Registered User Join Date: Feb 2003 Location: Staunton, Virginia Posts: 554	Hi Mike, the bracket is for the left (drivers) side of the motor. I know that they made the goose necks with the part # stamped on the base and the neck. I need the one stamped on the neck if you have it. I just need the stick. I have the tube that has the bracket that connects to the drivers side exhaust manifold. The stick should be about 25 and a half inches long not including the handle. Thanks for your help Mike, Scott

08-10-2005, 07:57 PM	#8
72 Cheyenne K20 Registered User Join Date: Feb 2003 Location: Staunton, Virginia Posts: 554	Thanks for all your help Mike, I will get a money order in the mail for you first thing in the morning. Thanks, Scott



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.