FS: 73-87 hedman headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ocbaud · 08-06-2005, 05:20 PM

cheap cheap cheap

if you come pick them up i'll let them go for only $40

no rust, good condition.

82c10 · 08-06-2005, 10:58 PM

what part # are they, and where in okc

ocbaud · 08-07-2005, 02:00 PM

#69092

right between I40 & I240, where they kinda come together

82c10 · 08-07-2005, 11:03 PM

how long did you use them

ocbaud · 08-08-2005, 12:13 AM

Quote:

Originally Posted by 82c10

how long did you use them

they were on my old 305 from umm.... hell.... end of summer of 2001, until i pulled replaced that engine in 2003.

http://members.cox.net/rgore15/pics/engine/engine2.JPG
http://members.cox.net/rgore15/pics/engine/engine1.JPG

only pictures i currently have of them. i would have reused them on the new engine, but i went with shorties since the truck is so low.

1987 Shortwide · 08-08-2005, 02:19 AM

dude, those plug wires look like one of those puzzles that you have to figure out...

ocbaud · 08-10-2005, 12:46 PM

any interest?

82c10 · 08-10-2005, 03:18 PM

Ill Get To You Later, If They Don't Sell VERY SOON

86 GMG · 08-11-2005, 11:58 AM

ya i might give you 20.00 for them i will pick up

82c10 · 08-11-2005, 01:52 PM

Quote:

Originally Posted by ocbaud

they were on my old 305 from umm.... hell.... end of summer of 2001, until i pulled replaced that engine in 2003.

http://members.cox.net/rgore15/pics/engine/engine2.JPG
http://members.cox.net/rgore15/pics/engine/engine1.JPG

only pictures i currently have of them. i would have reused them on the new engine, but i went with shorties since the truck is so low.

would i have to use 90 degree plug boots, or with those it looks like i might just be able to use straight ones, could i use straight ones on those

ocbaud · 08-11-2005, 05:29 PM

you should be able to use straight boots IF they are long enough wires. The back ones i used straight boots on and the rest were all 90degree, but if you ran them over the headers some how you should have no problems with straights, but i'm not positive

ocbaud · 08-15-2005, 11:46 AM

still for sale

AirMale · 08-15-2005, 12:33 PM

miss your truck yet?

C&C Chevy · 08-15-2005, 06:41 PM

oc, I'll take them.

PM me.

ocbaud · 08-15-2005, 07:18 PM

Quote:

Originally Posted by AirMale

miss your truck yet?

its sitting in the drive way, i drive it now and then

c&c is gonna buy them it looks like

C&C Chevy · 08-15-2005, 09:05 PM

Quote:

Originally Posted by ocbaud

its sitting in the drive way, i drive it now and then

c&c is gonna buy them it looks like

Yep.

I wish I could let my truck sit for awhile with the gas prices the way they are!

08-06-2005, 05:20 PM	#1
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	FS: 73-87 hedman headers cheap cheap cheap if you come pick them up i'll let them go for only $40 no rust, good condition.

08-06-2005, 10:58 PM	#2
82c10 needin' money Join Date: May 2005 Location: Chickasha, Oklahoma Posts: 1,106	what part # are they, and where in okc __________________ *SWB Stands for Short Wide Bed*

08-07-2005, 11:03 PM	#4
82c10 needin' money Join Date: May 2005 Location: Chickasha, Oklahoma Posts: 1,106	how long did you use them __________________ *SWB Stands for Short Wide Bed*

08-10-2005, 03:18 PM	#8
82c10 needin' money Join Date: May 2005 Location: Chickasha, Oklahoma Posts: 1,106	Ill Get To You Later, If They Don't Sell VERY SOON __________________ *SWB Stands for Short Wide Bed* Last edited by 82c10; 08-10-2005 at 03:18 PM.

08-11-2005, 11:58 AM	#9
86 GMG Registered User Join Date: Apr 2005 Location: Tulsa Oklahoma Posts: 943	ya i might give you 20.00 for them i will pick up __________________ square body trucks an addiction or an investment either way they consume all my extra time and money

08-07-2005, 02:00 PM	#3
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	#69092 right between I40 & I240, where they kinda come together

08-08-2005, 02:19 AM	#6
1987 Shortwide Senior Member Join Date: Feb 2003 Location: Wichita KS Posts: 610	dude, those plug wires look like one of those puzzles that you have to figure out... __________________ ~Steve~ Friesen High Performance Auto and Graphics Toy: 87 Shortwide, 406 smallblock with a little boost My 87 buildup Daily Driver: 99 Sierra SLE 4X4. Black on Black and harder than hell to keep clean.

08-10-2005, 12:46 PM	#7
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	any interest?

08-11-2005, 05:29 PM	#11
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	you should be able to use straight boots IF they are long enough wires. The back ones i used straight boots on and the rest were all 90degree, but if you ran them over the headers some how you should have no problems with straights, but i'm not positive

08-15-2005, 11:46 AM	#12
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	still for sale

08-15-2005, 12:33 PM	#13
AirMale Senior Member Join Date: Jan 2003 Location: Atlantic City, NJ Posts: 1,073	miss your truck yet? __________________ 86 SWB 9.0 LITER T-400-OD 4.11 eaton-4/5 drop Best 1/4 12.51 @112mph no traction

08-15-2005, 06:41 PM	#14
C&C Chevy Registered User Join Date: Feb 2003 Location: Midwest City, OK Posts: 1,001	oc, I'll take them. PM me. __________________ Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.