Anyone have a speed sensor on their speedometer? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Russell · 08-07-2005, 05:49 PM

And happen to have your dash out of your truck? I need to know the pinout for it, which wire is for power, which is for ground, and which is for the signal wire. I unpinned mine, and forgot to take note of which wire went where.

Thanks!

Russell

**Captkaos** · 08-08-2005, 04:24 PM

Russell, I will be in the garage tonight. shoot me an email at webmaster@73-87chevytrucks.com and remind me to look before I go out. I think mine is still together. BTW, I just got a line on the 749 computer for my TPI.

Russell · 08-08-2005, 07:10 PM

Thank you Chris!

Email is away

Russell · 08-08-2005, 10:02 PM

Here is a pic of what I am needing. I'm pretty sure which are the VSS outputs, but I have no clue which pole is positive, and which pole is negative...

**Captkaos** · 08-08-2005, 11:32 PM

Ok, here is what I have. I am looking this up right now. I couldn't find the plug on my spare harness, so I just checked out the '87.

**Captkaos** · 08-09-2005, 12:05 AM

Ok, far right on your pic is positive, then to the left is ground from what I found.

Russell · 08-09-2005, 12:09 AM

That pic is all I needed

Positive on the far right in my pic, ground in the center, and vss output on the left

Thanks Chris! Now I just gotta pin that, and finish installing my headlight relay

Then the rest of my dash can be put back together

**Captkaos** · 08-09-2005, 12:12 AM

No problem. Glad to help out. I am going to have to figure this stuff out soon also. Send me some more pics of what you have going on. I need some motivation for the Jimmy. I hopefully will get the intake vatted this week.

Russell · 08-09-2005, 12:16 AM

Hehe, I can load you right up with pics

Just gimme your email address and I'll send a whole lotta em!

Russell · 08-09-2005, 12:31 AM

That'd be your tired eyes, lol

Though, that did get me to look again, lol

**Captkaos** · 08-09-2005, 01:18 PM

Well, you can send them to the webmaster account. Hit me up!

08-07-2005, 05:49 PM	#1
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Anyone have a speed sensor on their speedometer? And happen to have your dash out of your truck? I need to know the pinout for it, which wire is for power, which is for ground, and which is for the signal wire. I unpinned mine, and forgot to take note of which wire went where. Thanks! Russell __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

08-08-2005, 04:24 PM	#2
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Russell, I will be in the garage tonight. shoot me an email at webmaster@73-87chevytrucks.com and remind me to look before I go out. I think mine is still together. BTW, I just got a line on the 749 computer for my TPI. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

08-08-2005, 07:10 PM	#3
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Thank you Chris! Email is away __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

08-08-2005, 10:02 PM	#4
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Here is a pic of what I am needing. I'm pretty sure which are the VSS outputs, but I have no clue which pole is positive, and which pole is negative... Attached Images __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) Last edited by Russell; 08-08-2005 at 10:04 PM.

08-08-2005, 11:32 PM	#5
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Ok, here is what I have. I am looking this up right now. I couldn't find the plug on my spare harness, so I just checked out the '87. Attached Images __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

08-09-2005, 12:05 AM	#6
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Ok, far right on your pic is positive, then to the left is ground from what I found. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

08-09-2005, 12:09 AM	#7
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	That pic is all I needed Positive on the far right in my pic, ground in the center, and vss output on the left Thanks Chris! Now I just gotta pin that, and finish installing my headlight relay Then the rest of my dash can be put back together __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) Last edited by Russell; 08-09-2005 at 12:15 AM.

08-09-2005, 12:12 AM	#8
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	No problem. Glad to help out. I am going to have to figure this stuff out soon also. Send me some more pics of what you have going on. I need some motivation for the Jimmy. I hopefully will get the intake vatted this week. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

08-09-2005, 12:16 AM	#9
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Hehe, I can load you right up with pics Just gimme your email address and I'll send a whole lotta em! __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) Last edited by Russell; 08-09-2005 at 12:16 AM.

08-09-2005, 12:31 AM	#10
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	That'd be your tired eyes, lol Though, that did get me to look again, lol __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

08-09-2005, 01:18 PM	#11
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Well, you can send them to the webmaster account. Hit me up! __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.