69-70 jimmy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Johns70 · 08-10-2005, 11:27 AM

would there be any interest in the above jimmy -blazer its got a307 -th350 205 case, parchment interior still got the buckets and console rear seat,i think it had a factory roll bar but not for sure.double wall top and gate,bodys a little rough, passenger door is good drivers door is rusted in the corners and so is the rear quarters behind doors about a 4 inch square. needs rockers,and the quarters behind the wheels are wrinkled a little.every thing else looks solid like the windshield frame and the rocker boxes and floors. i beleive this is a nevada origanal rig.

qksilver · 08-10-2005, 12:18 PM

Any pix and how much?
SCJKOVACH@aol.com
Thanks,
Steve

bouncytruck · 08-10-2005, 12:36 PM

Pictures help alot. Board rules also state you need to post a price. FYI, the Jimmy's didn't appear until 1970 model year (at least as far as I have read here on the board).

treyvette17 · 08-10-2005, 01:12 PM

interest here, pics and price please.

treyvette17@msn.com

MIDSTATE__67-72 · 08-10-2005, 02:28 PM

interested in the motor if it happens to turn out to be a 71

Johns70 · 08-10-2005, 02:58 PM

I havn't bought it yet, I was testing the waters for puchaseing it and parting it out or selling it hole. as for year it must be a 70, i'm not much into the gmc years. i'll see about pics later today. thanks john

71jimmy · 08-10-2005, 09:44 PM

John, if you buy it and then part it, I would be interested in the front driver and passenger seats with the seat rails. Keep me in mind if you go that route. Thanks.

And yes, you shouldn't have any problems selling parts or the whole thing if the price is right.

Johns70 · 08-11-2005, 12:22 AM

not sure what i'm doin yet. I did do some cleaninig out of the insides and found no rust on the inside of the tub, worst spots are right behind doors. did find pass. door is orignal and the left is a cut down pickup door.

bouncytruck · 08-11-2005, 11:05 AM

That looks like a restorable blazer to me.

Johns70 · 08-11-2005, 08:24 PM

the title says its a 70 and its missing a few parts, the console lid is broke,drivers side seat back broke, the lift gate arms are missing the upper halves and one side of the lift gate is missing a big chuck of fiberglass where the lift arm goes.thought i might find a few of the parts inside but i didn't. the passenger door is original and has all the peices but the drivers door is a cut down pickup door and its missing all the blazer specific parts on the door striker side and missing the rear seat floor clamps.i'll keep you guys posted on if i'm gonna part or fix. john

08-10-2005, 11:27 AM	#1
Johns70 Registered User Join Date: Dec 2001 Location: Spring Creek, nevada. U.S.A. Posts: 456	69-70 jimmy would there be any interest in the above jimmy -blazer its got a307 -th350 205 case, parchment interior still got the buckets and console rear seat,i think it had a factory roll bar but not for sure.double wall top and gate,bodys a little rough, passenger door is good drivers door is rusted in the corners and so is the rear quarters behind doors about a 4 inch square. needs rockers,and the quarters behind the wheels are wrinkled a little.every thing else looks solid like the windshield frame and the rocker boxes and floors. i beleive this is a nevada origanal rig. __________________ 69 chevy short wide box project 70 GMC jimmy project

08-10-2005, 12:36 PM	#3
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Pictures help alot. Board rules also state you need to post a price. FYI, the Jimmy's didn't appear until 1970 model year (at least as far as I have read here on the board). __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

08-10-2005, 02:28 PM	#5
MIDSTATE__67-72 Senior Member Join Date: Oct 2004 Location: decatur, il Posts: 199	Motor interested in the motor if it happens to turn out to be a 71

08-10-2005, 02:58 PM	#6
Johns70 Registered User Join Date: Dec 2001 Location: Spring Creek, nevada. U.S.A. Posts: 456	I havn't bought it yet, I was testing the waters for puchaseing it and parting it out or selling it hole. as for year it must be a 70, i'm not much into the gmc years. i'll see about pics later today. thanks john __________________ 69 chevy short wide box project 70 GMC jimmy project

08-10-2005, 09:44 PM	#7
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,083	John, if you buy it and then part it, I would be interested in the front driver and passenger seats with the seat rails. Keep me in mind if you go that route. Thanks. And yes, you shouldn't have any problems selling parts or the whole thing if the price is right. __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all." Last edited by 71jimmy; 08-10-2005 at 09:45 PM.

08-10-2005, 12:18 PM	#2
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Any pix and how much? SCJKOVACH@aol.com Thanks, Steve

08-10-2005, 01:12 PM	#4
treyvette17 Registered User Join Date: Jul 2004 Location: Springfield, MO Posts: 60	interest here, pics and price please. treyvette17@msn.com

08-11-2005, 12:22 AM	#8
Johns70 Registered User Join Date: Dec 2001 Location: Spring Creek, nevada. U.S.A. Posts: 456	pics not sure what i'm doin yet. I did do some cleaninig out of the insides and found no rust on the inside of the tub, worst spots are right behind doors. did find pass. door is orignal and the left is a cut down pickup door. Attached Images __________________ 69 chevy short wide box project 70 GMC jimmy project Last edited by Johns70; 08-11-2005 at 12:25 AM.

08-11-2005, 11:05 AM	#9
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	That looks like a restorable blazer to me. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

08-11-2005, 08:24 PM	#10
Johns70 Registered User Join Date: Dec 2001 Location: Spring Creek, nevada. U.S.A. Posts: 456	the title says its a 70 and its missing a few parts, the console lid is broke,drivers side seat back broke, the lift gate arms are missing the upper halves and one side of the lift gate is missing a big chuck of fiberglass where the lift arm goes.thought i might find a few of the parts inside but i didn't. the passenger door is original and has all the peices but the drivers door is a cut down pickup door and its missing all the blazer specific parts on the door striker side and missing the rear seat floor clamps.i'll keep you guys posted on if i'm gonna part or fix. john __________________ 69 chevy short wide box project 70 GMC jimmy project Last edited by Johns70; 08-11-2005 at 08:26 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.