sandblasting frame... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70c10swb · 08-10-2005, 10:23 PM

Just trying to get an idea on how much to get a bare frame blasted. how much was it for you to get it done?

lowrider79 · 08-10-2005, 10:27 PM

I did my own but I got a quote for $130 to $150

jay-dawg · 08-11-2005, 03:10 AM

wow that's cheap....

DTerry · 08-11-2005, 06:23 AM

I think we paid $150, blasted and epoxy primed.

(D)

70c10swb · 08-11-2005, 05:37 PM

so i can expect around 150?

cduster · 08-11-2005, 06:56 PM

I had my frame, and all the control arms, trans crossmember,and some other smaller parts done for $125.

Alan Potter · 08-11-2005, 09:56 PM

Mine was $200, I guess I got took!!

edmonton72 · 08-12-2005, 02:17 AM

My cousin did mine and all he got was beer.

**68350** · 08-12-2005, 12:48 PM

had a buddy's buddy do it for free.

cdowns · 08-12-2005, 12:55 PM

something to think about where you're from is where does the blasters sand come from// make sure it's bagged sand i knew a guy in your area(marthas vineyard) he used to get free sand at the beach for blasting ..took awhile for people to catch on that the beachsand was loaded with millions of years of salt and it was now imbedded in thier metal talk about express rusting!!!

mocwon · 08-12-2005, 01:35 PM

$100 and they used aluminum oxide not sand.

xam · 08-12-2005, 05:16 PM

Depends on the time of year it is 100 degrees with 80 % humidity here so I would charge $ 750.00

. In the fall / winter $150.00 sounds about right.

08-10-2005, 10:23 PM	#1
70c10swb no brain no headache Join Date: Jan 2005 Location: Cape Cod MA Posts: 567	sandblasting frame... Just trying to get an idea on how much to get a bare frame blasted. how much was it for you to get it done? __________________ 1996 GMC Sierra z71 1970 SWB 2wd (project)

08-11-2005, 03:10 AM	#3
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	wow that's cheap.... __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

08-11-2005, 06:23 AM	#4
DTerry '70 GMC C-25 LWB Join Date: Oct 2004 Location: Binghamton, N.Y. Posts: 273	I think we paid $150, blasted and epoxy primed. (D) __________________ 1970 GMC C-25 LWB (middle of frame up) 5-7 drop with 3in drop spindles, flip kit with blocks and still keeping the 3/4 ton. Shaved drip rails and marker lights, rear roll pan, cowl induction hood. 1987 Camaro z28 350, vortec 305 heads. 10:1 comp, t5 trans. Street terrrorizer. 1988 Monte Carlo (Super Stock ashpalt race car) My Truck

08-11-2005, 05:37 PM	#5
70c10swb no brain no headache Join Date: Jan 2005 Location: Cape Cod MA Posts: 567	so i can expect around 150? __________________ 1996 GMC Sierra z71 1970 SWB 2wd (project)

08-11-2005, 06:56 PM	#6
cduster Registered User Join Date: Oct 2002 Location: S.W. Michigan Posts: 403	I had my frame, and all the control arms, trans crossmember,and some other smaller parts done for $125. __________________ Good Judgment comes from experience. Most experience comes from bad judgment.

08-10-2005, 10:27 PM	#2
lowrider79 Registered User Join Date: Jul 2004 Location: Shakopee Minnesota Posts: 174	I did my own but I got a quote for $130 to $150

08-11-2005, 09:56 PM	#7
Alan Potter Registered User Join Date: Apr 2005 Location: Northwest Ohio Posts: 162	Mine was $200, I guess I got took!! __________________ '12 Silverado Crew Cab 4x4 '05 Silverado SWB '67 Chevrolet CST 2wd '49 Willys Jeepster

08-12-2005, 02:17 AM	#8
edmonton72 Nothings as cool as my 72 Join Date: May 2005 Location: Edmonton, AB, Kanuckastan Posts: 181	My cousin did mine and all he got was beer. __________________ 1972 C10 Longbox In the middle of body off restoration Rebuilt 355, turbo 400, 3.42 12-bolt Rolling chassis finally done and cab mounted. Now onto sanding, bondo and more sanding.

08-12-2005, 12:48 PM	#9
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	had a buddy's buddy do it for free. __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

08-12-2005, 12:55 PM	#10
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	something to think about where you're from is where does the blasters sand come from// make sure it's bagged sand i knew a guy in your area(marthas vineyard) he used to get free sand at the beach for blasting ..took awhile for people to catch on that the beachsand was loaded with millions of years of salt and it was now imbedded in thier metal talk about express rusting!!! __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

08-12-2005, 01:35 PM	#11
mocwon Keep On Truckin' Join Date: Mar 2003 Location: Buda, Texas Posts: 1,354	$100 and they used aluminum oxide not sand. __________________ Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire.....

08-12-2005, 05:16 PM	#12
xam Registered User Join Date: Feb 2003 Location: maryland Posts: 34	Depends on the time of year it is 100 degrees with 80 % humidity here so I would charge $ 750.00 . In the fall / winter $150.00 sounds about right.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.