Need opinions on tail light placement - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 08-14-2005, 05:40 PM

Do you guys think they look good at this location or should I lower them closer to the bumper (kind of like Tim Christians and FirstGen's)?

I'll have to take the fender off and all, just looking for some opinions.

*chevytruckfan* · 08-14-2005, 06:17 PM

I think if you centered between the top of the fender and top of the bumper it will look ok. Not sure if that is the measurement that you used but they do look just a bit too high.

**tnblazerk5** · 08-14-2005, 06:28 PM

i think they look good right there
and why take the fender off and run a risk of scraching it or the bed just to drill more holes to move the tail lights

86swb · 08-14-2005, 09:03 PM

I think they should be lowered just a little. MO

5150 · 08-14-2005, 09:30 PM

I guess I don't have to remove the fender. I could just drill to holes in the front there and just have long bolts, but I don't know how that would look.

5150 · 08-16-2005, 07:11 PM

anybodyelse?

Bamm · 08-16-2005, 07:22 PM

I'll try to find a pic of Tim & Firstgen's truck and compare, but my first thought was that I would prefer mine to be lower......Jerry

AesC10s · 08-16-2005, 07:47 PM

they look fine where they are at.

**john** · 08-16-2005, 08:08 PM

They look good. When I see a truck as nice as yours, the last thing I look at is how high or low the taillights are. John

cdowns · 08-16-2005, 08:58 PM

i think they look fine where they are// should be nice and visable to drivers behind you which to me seems like the most important part of the equation

5150 · 08-16-2005, 09:10 PM

cdowns-that was my thought. Okay they stay where they are.

smbrouss70 · 08-16-2005, 09:12 PM

I think its completely up to you and the misses (since she's helping

). But just for a comparison...

Yours...

And theirs...

smbrouss70 · 08-16-2005, 09:13 PM

I think FirstGen's are the same height as yours... if not then they're close.

5150 · 08-16-2005, 09:16 PM

I guess I always pictured his lower. Maybe it's the fact that the roll pan makes it appear lower.

FirstGen · 08-17-2005, 11:53 AM

Mine look just like that! If I had a bumper I would consider lowering them like Tim's.
Looking good there!

farside847 · 08-17-2005, 12:02 PM

I kinda like the chrome-chrome look with the lights close to the bumper.... I guess your not doing backup lights?

sleepyboy · 08-17-2005, 05:06 PM

What kind of lights are those?? I'd like a pair is well...

57sailplane · 08-17-2005, 08:06 PM

dude can you post some pictures of your truck. i tried looking at your truck at the site you have posted but they will not come up. i love that color. had already been thinking of doing mine in a simaler shade.

barn9 · 08-17-2005, 08:56 PM

I like them just where they are also. Here is a quickie of how they would look lowered that may help your decision:

Joe67 · 08-19-2005, 08:03 AM

Quote:

Originally Posted by yellow69

Do you guys think they look good at this location or should I lower them closer to the bumper (kind of like Tim Christians and FirstGen's)?

I'll have to take the fender off and all, just looking for some opinions.

I like them lower myself.

May I ask where the bracket is from?

MOTHERTRUCKERS · 08-19-2005, 08:24 AM

I would get rid of the chrome brackets that rust in a couple of months and french the stainless tail lights into the fender, or make a set of stainless brackets a little shorter to bring the light closer to the stake pocket and lower them a little bit.

junkyardjohn · 08-19-2005, 11:41 AM

Quote:

Originally Posted by MOTHERTRUCKERS

I would get rid of the chrome brackets that rust in a couple of months and french the stainless tail lights into the fender, or make a set of stainless brackets a little shorter to bring the light closer to the stake pocket and lower them a little bit.

I DON'T THINK THERES ANY FASTER WAY TO SCREW UP THE LOOKS OF A NICE TRUCK THAN TO PUT THE TAILIGHTS IN THE FENDERS, OR BY PUTTING HIGH BACK BUCKETS THAT STICK UP IN THE BACK WINDOW A FOOT. CHROME DOESN'T RUST IN 60 DAYS EVERYWHERE. HERES A PIC OF A HOOD THAT SAT OUTSIDE IN THE RAIN & SNOW ALL LAST WINTER. JOHN

CHEVYE · 08-19-2005, 11:58 AM

i'd just leave them.

**CPNE** · 08-19-2005, 12:07 PM

Just don't recess them in the bumper or roll pan. When the tailgate is down and the back is full of something that sticks out the back a ways, noone can see your taillights. Thats why they are always mounted outside the tailgate opening from the factory.

kndall · 08-19-2005, 12:27 PM

Just my opinion, I think that they look good where they are at currently. They are not in a position that would make it hard for someone behind you to see, and that is the reason for taillights in the first place.

08-14-2005, 05:40 PM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Need opinions on tail light placement Do you guys think they look good at this location or should I lower them closer to the bumper (kind of like Tim Christians and FirstGen's)? I'll have to take the fender off and all, just looking for some opinions. Attached Images __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

08-14-2005, 09:03 PM	#4
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	I think they should be lowered just a little. MO __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

08-14-2005, 09:30 PM	#5
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	I guess I don't have to remove the fender. I could just drill to holes in the front there and just have long bolts, but I don't know how that would look. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

08-16-2005, 07:11 PM	#6
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	anybodyelse? __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4 Last edited by 5150; 08-16-2005 at 07:14 PM.

08-16-2005, 07:22 PM	#7
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	I'll try to find a pic of Tim & Firstgen's truck and compare, but my first thought was that I would prefer mine to be lower......Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

08-14-2005, 06:17 PM	#2
chevytruckfan Account Suspended Join Date: May 2004 Location: Lake Placid, Florida Posts: 930	I think if you centered between the top of the fender and top of the bumper it will look ok. Not sure if that is the measurement that you used but they do look just a bit too high.

08-14-2005, 06:28 PM	#3
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	i think they look good right there and why take the fender off and run a risk of scraching it or the bed just to drill more holes to move the tail lights

08-16-2005, 07:47 PM	#8
AesC10s Chevy truck addict Join Date: Apr 2005 Location: Thornton Colorado Posts: 825	they look fine where they are at.

08-16-2005, 08:08 PM	#9
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	They look good. When I see a truck as nice as yours, the last thing I look at is how high or low the taillights are. John __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

08-16-2005, 08:58 PM	#10
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	i think they look fine where they are// should be nice and visable to drivers behind you which to me seems like the most important part of the equation __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

08-16-2005, 09:10 PM	#11
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	cdowns-that was my thought. Okay they stay where they are. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

08-16-2005, 09:12 PM	#12
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,782	I think its completely up to you and the misses (since she's helping ). But just for a comparison... Yours... And theirs... Attached Images __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

08-16-2005, 09:13 PM	#13
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,782	I think FirstGen's are the same height as yours... if not then they're close. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

08-16-2005, 09:16 PM	#14
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	I guess I always pictured his lower. Maybe it's the fact that the roll pan makes it appear lower. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

08-17-2005, 11:53 AM	#15
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	Mine look just like that! If I had a bumper I would consider lowering them like Tim's. Looking good there! __________________ 1968 C10 build in process TT LSA/6L90e/9"



Register or Log In To remove these advertisements.

08-17-2005, 12:02 PM	#16
farside847 Registered User Join Date: Feb 2005 Location: Bay Area, California Posts: 995	I kinda like the chrome-chrome look with the lights close to the bumper.... I guess your not doing backup lights? __________________ 1971 Chevy C10 Shortbed Stepside, 307v8 3-on-the-tree

08-17-2005, 05:06 PM	#17
sleepyboy '69 Step Join Date: Mar 2005 Location: Marion, Texas Posts: 722	What kind of lights are those?? I'd like a pair is well...

08-17-2005, 08:06 PM	#18
57sailplane Senior Member Join Date: Mar 2004 Location: Nebraska Posts: 583	dude can you post some pictures of your truck. i tried looking at your truck at the site you have posted but they will not come up. i love that color. had already been thinking of doing mine in a simaler shade.

08-17-2005, 08:56 PM	#19
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	I like them just where they are also. Here is a quickie of how they would look lowered that may help your decision: Attached Images __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

08-19-2005, 08:24 AM	#21
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	I would get rid of the chrome brackets that rust in a couple of months and french the stainless tail lights into the fender, or make a set of stainless brackets a little shorter to bring the light closer to the stake pocket and lower them a little bit. __________________ Rest in Peace Ed. Thanks for all the good times.

08-19-2005, 11:58 AM	#23
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	i'd just leave them. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

08-19-2005, 12:07 PM	#24
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Just don't recess them in the bumper or roll pan. When the tailgate is down and the back is full of something that sticks out the back a ways, noone can see your taillights. Thats why they are always mounted outside the tailgate opening from the factory. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

08-19-2005, 12:27 PM	#25
kndall Registered User Join Date: Nov 2004 Location: Moore, OK..73160 Posts: 207	Just my opinion, I think that they look good where they are at currently. They are not in a position that would make it hard for someone behind you to see, and that is the reason for taillights in the first place.

Register or Log In To remove these advertisements.