FS: 4" front spring/4"rear blocks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JIMs70GMC** · 08-24-2005, 11:37 AM

I have a pair of 4" front springs and 4" rear blocks. Springs are 1 yr old, blocks are older but never installed. No u-bolts or shocks. Springs have good bushings w/ sleeves. Will fit 67-72 4wds 1/2 ton or 3/4 ton. $110 plus shipping.

highrpm · 08-24-2005, 03:11 PM

Do you know what brand of springs they are.

**JIMs70GMC** · 08-24-2005, 04:15 PM

They are rough country, the blocks are trailmaster. I went up to 6".

**JIMs70GMC** · 08-25-2005, 10:15 PM

How about $100 plus shipping?

al's71gmc · 08-26-2005, 06:57 AM

how much to ship to Nevada 89316. My son wants this for his 72 1/2.

As long as shipping's not too much, I want them. I'll check back this eve, Thanks,
Al

**JIMs70GMC** · 08-26-2005, 07:04 AM

I'll figure it up. The springs are 44lbs each and I'll have to weigh the blocks.

al's71gmc · 08-26-2005, 11:03 PM

I'm going to pass, but here's a bump.

crispy · 09-03-2005, 10:39 AM

i'm interested. do you still have them? so basically all you're getting rid of is front springs and rear blocks correct? please let me know.

thanks

**JIMs70GMC** · 09-03-2005, 09:21 PM

yep still have them. front springs and blocks. shipping to Al in nevada would have been $35 per spring. Let me know if you want them.

**JIMs70GMC** · 09-07-2005, 06:15 AM

ttt

1969K10 · 09-07-2005, 04:51 PM

So i've got a closed knuckle D44 front axle... From what i've read, these springs would bolt in no problems. Any idea if i'd need to drop the steering arm? Any other unexpected things I should know about?

crispy · 09-07-2005, 05:50 PM

i'm gonna pass... with shipping this stops being a good deal for me...
good luck though.

**JIMs70GMC** · 09-07-2005, 06:47 PM

1969k10, yes it would be recommended to raise the steering arm, or get a dropped pitman arm, but it's not absolutely required, the drag link could be adjusted to center the steering wheel.

**JIMs70GMC** · 09-13-2005, 07:44 PM

Here's some pics:

and

08-24-2005, 11:37 AM	#1
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	FS: 4" front spring/4"rear blocks I have a pair of 4" front springs and 4" rear blocks. Springs are 1 yr old, blocks are older but never installed. No u-bolts or shocks. Springs have good bushings w/ sleeves. Will fit 67-72 4wds 1/2 ton or 3/4 ton. $110 plus shipping. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

08-24-2005, 03:11 PM	#2
highrpm Registered User Join Date: Dec 2004 Location: Davidson, NC Posts: 269	Brand Do you know what brand of springs they are.

08-24-2005, 04:15 PM	#3
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	They are rough country, the blocks are trailmaster. I went up to 6". __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

08-25-2005, 10:15 PM	#4
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	How about $100 plus shipping? __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

08-26-2005, 06:57 AM	#5
al's71gmc 4 eyed fever Join Date: Jul 2005 Location: Eureka, Nevada Posts: 500	how much to ship to Nevada 89316. My son wants this for his 72 1/2. As long as shipping's not too much, I want them. I'll check back this eve, Thanks, Al __________________ 1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!! Last edited by al's71gmc; 08-26-2005 at 07:27 AM. Reason: left something out

08-26-2005, 07:04 AM	#6
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	I'll figure it up. The springs are 44lbs each and I'll have to weigh the blocks. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

08-26-2005, 11:03 PM	#7
al's71gmc 4 eyed fever Join Date: Jul 2005 Location: Eureka, Nevada Posts: 500	I'm going to pass, but here's a bump. __________________ 1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!!

09-03-2005, 10:39 AM	#8
crispy '71 Chevy Blazer Join Date: Jan 2005 Location: San Leandro, CA (near Oakland) Posts: 96	i'm interested. do you still have them? so basically all you're getting rid of is front springs and rear blocks correct? please let me know. thanks __________________ '71 K5 Blazer (new project / daily driver) "If you are not working to improve the situation, you have no business complaining"

09-03-2005, 09:21 PM	#9
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	yep still have them. front springs and blocks. shipping to Al in nevada would have been $35 per spring. Let me know if you want them. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

09-07-2005, 06:15 AM	#10
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	ttt __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

09-07-2005, 04:51 PM	#11
1969K10 Senior Member Join Date: Jul 2004 Location: Clarks Hill, Indiana Posts: 733	So i've got a closed knuckle D44 front axle... From what i've read, these springs would bolt in no problems. Any idea if i'd need to drop the steering arm? Any other unexpected things I should know about?

09-07-2005, 05:50 PM	#12
crispy '71 Chevy Blazer Join Date: Jan 2005 Location: San Leandro, CA (near Oakland) Posts: 96	i'm gonna pass... with shipping this stops being a good deal for me... good luck though. __________________ '71 K5 Blazer (new project / daily driver) "If you are not working to improve the situation, you have no business complaining"

09-07-2005, 06:47 PM	#13
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	1969k10, yes it would be recommended to raise the steering arm, or get a dropped pitman arm, but it's not absolutely required, the drag link could be adjusted to center the steering wheel. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

09-13-2005, 07:44 PM	#14
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Here's some pics: and __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.