Tach and bed floor for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kleantouch · 08-25-2005, 08:37 PM

A few things left over-

69-72 factory tach for guage cluster- new in box- NOT GM- probably from china- this is for the tach ONLY, no glass, no wiring, only the tach. same as ChevyDuty, LMC and others sell. Worked once when I tried it- ended up with another complete cluster. $ 25 plus ride

68-72 Long bed FLOOR from Classic Muscle- this is the 2-part floor- needs to be welded in middle, no supports, etc. I can put on a pallet and ship to you- will need to be shipped common carrier/LTL $50 plus ride

1974 BBC spreadbore oval port intake manifold - free plus ride

Or stop by, check out my Crimson Pearl Blazer w/ 454, and take the parts home with you! Greenville OH, 25 miles NW of Dayton, 10 miles from Indiana,
20 mins north of I-70 and 20 min West of I-75. And I've got a forklift to load with!

Huck · 08-25-2005, 08:43 PM

I'll take the tach if it is identical to the factory one. What is ship to 40003. Huck

**ScottH** · 08-25-2005, 08:44 PM

I know a tach is a tach, but can u send me a pic?
Also is this for an 8 or 6?

Thanks.

Kleantouch · 08-25-2005, 09:01 PM

Huck, you are first in line- I'll get shipping to you in AM.
Scott, it is for an 8- at least it worked on my 454. I'll see about posting a pic in the AM.

chevyguy_72 · 08-25-2005, 10:44 PM

I'll take third dibs on that tack if those other guys back out.

GMC AMI · 08-26-2005, 06:06 AM

Please check the frieght charge to High View Farm at 04746. Thank you.

68-72 Long bed FLOOR from Classic Muscle- this is the 2-part floor- needs to be welded in middle, no supports, etc. I can put on a pallet and ship to you- will need to be shipped common carrier/LTL $50 plus ride

chipflyer · 08-26-2005, 10:53 AM

I would also be interested in the bed floor If Mike passes and would like a rough idea of shipping to 66617.
Thanks

Jeff

Kleantouch · 08-26-2005, 02:54 PM

Here are some pics of the tach and bed floor.

Bed floor shipping to Ottawa KS is $169 to a business, $ 358 to a residence- this includes a lift gate for unloading.

Shipping the bed floor to Grand Isle ME (the dispatcher asked if it was grand isle or High View Farm, I chose the wrong one, sorry) $157.65 to a business, $355 to a residence- includes lift gate service.

Chipflyer, Topeka would probably be in that $169 range- If Kingsolver72 and then Mile Files pass, I'll get you a more accurate rate.

These rates INCLUDE the 16.7% fuel surcharge.

Freight rates are subject to change with out notice.

If anybody wants to pick up or schedule their own carrier- thats OK too.

Order of preference for the bed floor, so far, is Kingsolver72, then Mike Files then Chipflyer. Kingsolver72- your move.

Huck- You're still first on the tach- let me know if you are seriuos about picking it up in Springfield.

Anybody need a BBC oval port manifold???

**ScottH** · 08-26-2005, 03:57 PM

Yes, looking for a bbc oval port manifold.....aluminum high rise....let me know what u have.

Thanks.

Alex Hayley · 08-26-2005, 04:28 PM

Did the tach sell? If not, I would like to be added to the list of buyers. I am sure that list is longgggg.

Huck · 08-26-2005, 06:52 PM

Carl, sent you a PM this morning and this afternoon. The tach should be a done deal. We can either meet at Springfield, Jamie_72 could pick it up at your place or you can ship it to me. Your call. Thanks----Huck

Kleantouch · 08-26-2005, 08:41 PM

To ScottH- the manifold is a cast iron stock oval port for a spreadbore- not an aluminum one. Let me know if you are still interested.

To everybody else- looks like the floor and tach are gone.

Thanks for the interest and good luck with your searches.

**ScottH** · 08-26-2005, 10:33 PM

Thanks for letting me know on the manifold, but will have to pass.

Kleantouch · 08-27-2005, 03:26 PM

OK Everybody- tach is sold, bed floor is sold.

Thanks for your interest.

08-25-2005, 08:37 PM	#1
Kleantouch Registered User Join Date: Jul 2004 Location: Lake Charles LA Posts: 138	Tach and bed floor for sale A few things left over- 69-72 factory tach for guage cluster- new in box- NOT GM- probably from china- this is for the tach ONLY, no glass, no wiring, only the tach. same as ChevyDuty, LMC and others sell. Worked once when I tried it- ended up with another complete cluster. $ 25 plus ride 68-72 Long bed FLOOR from Classic Muscle- this is the 2-part floor- needs to be welded in middle, no supports, etc. I can put on a pallet and ship to you- will need to be shipped common carrier/LTL $50 plus ride 1974 BBC spreadbore oval port intake manifold - free plus ride Or stop by, check out my Crimson Pearl Blazer w/ 454, and take the parts home with you! Greenville OH, 25 miles NW of Dayton, 10 miles from Indiana, 20 mins north of I-70 and 20 min West of I-75. And I've got a forklift to load with!

08-25-2005, 10:44 PM	#5
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Hastings, Nebraska Posts: 956	I'll take third dibs on that tack if those other guys back out. __________________ Current Rides: Vintage Evil - 72 Chevy C10 (Always a work in progress) Vintage Evil Build Thread EvilK5 - 71 K5 Blazer Evil Twin - 2006 Suzuki M109R EvilDmax- 2018 GMC 2500 Denali Duramax

08-26-2005, 06:06 AM	#6
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	Please check the frieght charge to High View Farm at 04746. Thank you. 68-72 Long bed FLOOR from Classic Muscle- this is the 2-part floor- needs to be welded in middle, no supports, etc. I can put on a pallet and ship to you- will need to be shipped common carrier/LTL $50 plus ride __________________ 1968 Chevy 4x4 307 4 speed

08-26-2005, 10:53 AM	#7
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	I would also be interested in the bed floor If Mike passes and would like a rough idea of shipping to 66617. Thanks Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

08-26-2005, 02:54 PM	#8
Kleantouch Registered User Join Date: Jul 2004 Location: Lake Charles LA Posts: 138	Here are some pics of the tach and bed floor. Bed floor shipping to Ottawa KS is $169 to a business, $ 358 to a residence- this includes a lift gate for unloading. Shipping the bed floor to Grand Isle ME (the dispatcher asked if it was grand isle or High View Farm, I chose the wrong one, sorry) $157.65 to a business, $355 to a residence- includes lift gate service. Chipflyer, Topeka would probably be in that $169 range- If Kingsolver72 and then Mile Files pass, I'll get you a more accurate rate. These rates INCLUDE the 16.7% fuel surcharge. Freight rates are subject to change with out notice. If anybody wants to pick up or schedule their own carrier- thats OK too. Order of preference for the bed floor, so far, is Kingsolver72, then Mike Files then Chipflyer. Kingsolver72- your move. Huck- You're still first on the tach- let me know if you are seriuos about picking it up in Springfield. Anybody need a BBC oval port manifold??? Attached Images

08-25-2005, 08:43 PM	#2
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	I'll take the tach if it is identical to the factory one. What is ship to 40003. Huck

08-25-2005, 08:44 PM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,193	I know a tach is a tach, but can u send me a pic? Also is this for an 8 or 6? Thanks.

08-25-2005, 09:01 PM	#4
Kleantouch Registered User Join Date: Jul 2004 Location: Lake Charles LA Posts: 138	Huck, you are first in line- I'll get shipping to you in AM. Scott, it is for an 8- at least it worked on my 454. I'll see about posting a pic in the AM.

08-26-2005, 03:57 PM	#9
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,193	Yes, looking for a bbc oval port manifold.....aluminum high rise....let me know what u have. Thanks.

08-26-2005, 04:28 PM	#10
Alex Hayley Registered User Join Date: Jul 2000 Location: NC Posts: 987	Did the tach sell? If not, I would like to be added to the list of buyers. I am sure that list is longgggg. Last edited by Alex Hayley; 08-26-2005 at 04:36 PM.

08-26-2005, 06:52 PM	#11
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Carl, sent you a PM this morning and this afternoon. The tach should be a done deal. We can either meet at Springfield, Jamie_72 could pick it up at your place or you can ship it to me. Your call. Thanks----Huck

08-26-2005, 08:41 PM	#12
Kleantouch Registered User Join Date: Jul 2004 Location: Lake Charles LA Posts: 138	To ScottH- the manifold is a cast iron stock oval port for a spreadbore- not an aluminum one. Let me know if you are still interested. To everybody else- looks like the floor and tach are gone. Thanks for the interest and good luck with your searches.

08-26-2005, 10:33 PM	#13
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,193	Thanks for letting me know on the manifold, but will have to pass.

08-27-2005, 03:26 PM	#14
Kleantouch Registered User Join Date: Jul 2004 Location: Lake Charles LA Posts: 138	OK Everybody- tach is sold, bed floor is sold. Thanks for your interest.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.