WTB: Aluminum SBC intake (performer or similar) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jim_PA · 08-29-2005, 10:59 PM

Just looking for a decent aluminum intake to top off a used 350 I picked up.

Let me know what you have, and how much with shipping to 17022.

Thanks

**ScottH** · 08-30-2005, 09:40 AM

Jim, are you looking for one with a spreadbore or square carb base?

Jim_PA · 08-30-2005, 09:50 AM

I'd like a dual plane for a stock 4 barrel Q-jet (spreadbore??) Non-egr preferred, but I could always use a block-off plate if necessary.

**ScottH** · 08-30-2005, 11:08 AM

I have one at home, will check it tonight and let u know.

MikeS · 08-30-2005, 01:46 PM

I've got an Edelbrock performer (#2101) at home. PM me if interested.
Mike

**ScottH** · 08-30-2005, 09:01 PM

Jim, it's an edelbrock performer with spreadbore base. It's in good shape, does have EGR but is blocked off already. How does $50 plus the ride sound?

Scott

Jim_PA · 08-30-2005, 09:10 PM

Quote:

Originally Posted by ScottH

Jim, it's an edelbrock performer with spreadbore base. It's in good shape, does have EGR but is blocked off already. How does $50 plus the ride sound?

Scott

Sounds like a good deal to me -- Thanks for the info, Mike, but I think it's only fair to go with the first bite.... unless you want to sell me yours for 49.99

**ScottH** · 08-30-2005, 09:11 PM

Oops, misread your response Jim. Let me know what u decide.

Thanks.

Jim_PA · 08-30-2005, 09:14 PM

Quote:

Originally Posted by ScottH

Oops, misread your response Jim. Let me know what u decide.

Thanks.

No, you read it just fine, I mixed up the names at first and you must have read it before I could edit it... Sent you a PM.

08-29-2005, 10:59 PM	#1
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	WTB: Aluminum SBC intake (performer or similar) Just looking for a decent aluminum intake to top off a used 350 I picked up. Let me know what you have, and how much with shipping to 17022. Thanks

08-30-2005, 01:46 PM	#5
MikeS Active Member Join Date: Jun 2000 Location: Pottstown, PA Posts: 197	I've got an Edelbrock performer (#2101) at home. PM me if interested. Mike __________________ The rides: '72 Blazer 350/4spd/Tuned Port Injection '69 Firebird 400/4 speed 2001 Dodge Dakota Sport 4X4/4.7L V8/5 spd/Headers/Jet Chip, etc. Daily Driver 2002 Airborne Zeppelin (roadbike) Titanium frame/Campy Chorus 2004 Filippi Italia S (rowing shell)

08-30-2005, 09:11 PM	#8
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Oops, misread your response Jim. Let me know what u decide. Thanks. Last edited by ScottH; 08-30-2005 at 09:12 PM.

08-30-2005, 09:40 AM	#2
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Jim, are you looking for one with a spreadbore or square carb base?

08-30-2005, 09:50 AM	#3
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	I'd like a dual plane for a stock 4 barrel Q-jet (spreadbore??) Non-egr preferred, but I could always use a block-off plate if necessary.

08-30-2005, 11:08 AM	#4
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	I have one at home, will check it tonight and let u know.

08-30-2005, 09:01 PM	#6
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Jim, it's an edelbrock performer with spreadbore base. It's in good shape, does have EGR but is blocked off already. How does $50 plus the ride sound? Scott



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.