Any Pics Of Aftermarket A/C installs? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Blue85 · 09-07-2005, 02:17 AM

Does anyone have pics of their aftermarket a/c installs? My cab is just about ready for primer and i am wanting to weld a patch on the firewall were the heater box goes, before it is painted. Can I use a billet style bulkhead for my hoses to pass through or will i have to use the piece that comes with the a/c kit? Still trying to chose between vintage air and old air for the system any input?

gator2511 · 09-07-2005, 08:56 AM

I put Vintage Air in mine and am very happy with it. You can use a billet bulkhead . Pics on my link. I'll try to get more of the bulkhead later today.

RicksTrucks · 09-07-2005, 09:32 AM

FirstGen has a nice setup, might ask him for pics.

FirstGen · 09-07-2005, 10:43 AM

Pics in link below. It's Classic Auto Air.

sleepyboy · 09-07-2005, 09:46 PM

I did vintage air; works well.

rmrtndl · 09-08-2005, 08:00 PM

Quote:

Originally Posted by FirstGen

Pics in link below.

Very nice truck. I have never seen one of these with a ODBC-II connector. Mine doesn't even have a computer!

FirstGen · 09-08-2005, 09:36 PM

Quote:

Originally Posted by rmrtndl

Very nice truck. I have never seen one of these with a ODBC-II connector. Mine doesn't even have a computer!

Thanks. It's a good money pit.

shifty · 09-09-2005, 01:11 AM

Here's FirstGen's install thread, just posted for someone else

http://67-72chevytrucks.com/vboard/s...75#post1310375

Just for info.

09-07-2005, 02:17 AM	#1
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,171	Any Pics Of Aftermarket A/C installs? Does anyone have pics of their aftermarket a/c installs? My cab is just about ready for primer and i am wanting to weld a patch on the firewall were the heater box goes, before it is painted. Can I use a billet style bulkhead for my hoses to pass through or will i have to use the piece that comes with the a/c kit? Still trying to chose between vintage air and old air for the system any input? __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.

09-07-2005, 08:56 AM	#2
gator2511 Registered User Join Date: Mar 2005 Location: tampa florida Posts: 776	I put Vintage Air in mine and am very happy with it. You can use a billet bulkhead . Pics on my link. I'll try to get more of the bulkhead later today. Last edited by gator2511; 09-07-2005 at 08:58 AM.

09-07-2005, 09:32 AM	#3
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	FirstGen has a nice setup, might ask him for pics. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

09-07-2005, 10:43 AM	#4
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	Pics in link below. It's Classic Auto Air. __________________ 1968 C10 build in process TT LSA/6L90e/9"

09-09-2005, 01:11 AM	#8
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Here's FirstGen's install thread, just posted for someone else http://67-72chevytrucks.com/vboard/s...75#post1310375 Just for info. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

09-07-2005, 09:46 PM	#5
sleepyboy '69 Step Join Date: Mar 2005 Location: Marion, Texas Posts: 722	I did vintage air; works well.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.