Question about 4spd rear motor mount - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72chop · 09-10-2005, 09:08 PM

started on my 72swb over 10 years ago. took the 6cyl 3spd out and installed a sbc with a 700r4. never used it and changed to a muncie 4spd. now have the muncie bolted to the auto xmember. what xmember should i be useing. i don't even know what a standard xmember looks like. any pics would help.

69 longhorn · 09-10-2005, 10:55 PM

Its fine how you have it

the stick trucks had a crossmember under the bellhousing, but no crossmember under the rear of the trans. i have swapped several over to stick, & used the auto trans crossmember......you will find it leaves more room for headers that way.

crazyL

72chop · 09-12-2005, 10:28 PM

ttt

09-10-2005, 09:08 PM	#1
72chop Active Member Join Date: Feb 2000 Location: Douglasville Ga Posts: 126	Question about 4spd rear motor mount started on my 72swb over 10 years ago. took the 6cyl 3spd out and installed a sbc with a 700r4. never used it and changed to a muncie 4spd. now have the muncie bolted to the auto xmember. what xmember should i be useing. i don't even know what a standard xmember looks like. any pics would help.

09-10-2005, 10:55 PM	#2
69 longhorn Registered User Join Date: Aug 2001 Location: rock island,il,usa Posts: 5,382	Its fine how you have it the stick trucks had a crossmember under the bellhousing, but no crossmember under the rear of the trans. i have swapped several over to stick, & used the auto trans crossmember......you will find it leaves more room for headers that way. crazyL __________________ http://community.webshots.com/user/hotrodhorn

09-12-2005, 10:28 PM	#3
72chop Active Member Join Date: Feb 2000 Location: Douglasville Ga Posts: 126	ttt



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.