2WD Blazer WANTED 70-72 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Yearn4Classics · 09-12-2005, 04:48 PM

Just like most people on this site; I've been looking for a 2wd Blazer for a few years now with no luck. If anyone knows of any in California or has one for sale please let me know. Looking for one with minimal rust, could be a complete project; I plane to "frame off" it anyways. Thanks guys.

**71blksuper4x4** · 09-12-2005, 05:06 PM

One of the guys is trying to sell one on the parts board... you might contact him... it is in texas and looks fairly solid. Hope this helps.... Trevor

bouncytruck · 09-12-2005, 05:07 PM

There is one for sale in Spokane, WA. $21,500. Looks nice, but the paint job isn't my thing.

http://adcache.collectorcartraderonl...0/80727260.htm

one in Pamona- $19,500
http://adcache.collectorcartraderonl...7/80689477.htm

one in San Diego - $12,500

http://adcache.collectorcartraderonl...2/80813362.htm

70short/step · 09-12-2005, 07:21 PM

There was a real nice one that was complete and running on Craigslist a couple of weeeks ago for $4500. It was in the Bay area too!

*72CSTC5* · 09-13-2005, 12:23 AM

I have one that if I get the money I want I will possibly sell. It is a Texas truck with good title. The only sheet metal that was replaced was the left and right floor pans where I guess the top leaked for a while. Rockers, rocker boxes, tailgate, doors, fenders, quarter, winshield frame have NO rust. The body has been modified, shaved doors, fenders shaved, quarters shaved, no gas hole, shaved markers, tailgate skin, rear roll pan, firwall shaved on a/c side. Dash has never been cut up. A/C cab. Have new grille inner and outer from Chevrolet and bowtie, not aftermarket. Coresupport is rust free. Body needs to be finished with some minor stuff. Doors have never been cut for speakers. Regulators have been blasted and painted. All new hardware for tailgate, Latches and locks, hidden handle kit (not installed). Frame was blasted and DP 74 primered. Rear trailing arms and front suspension have been painted dodge viper red. Lowered springs, complete new front end out of 87 Suburban crossmember. Van tilt column (needs to be cut). Rear end 3.73 gears brand new, new Auburn Posi with complete intsall kit and bearings still in packages. New body bushing kit. Every new weatherstrip possible. 1/2 inch aluminum fuel line for truck. New poly fuel tank kit, 355 small block professionaly built dynoed 425hp, Needs intake, rockers, carb, and accesories to complete motor. I have a 700r4 that needs built that goes with it. I have installed and drilled the rear coil over shock package from CPP industries. Dropped spindles and springs. Leather interior out of a Chrysler Sebring Convertible (almost new). All new lamps and lenses front and rear. Rechromed factory front bumper. The list goes on and on. I need 10,500.00 for it if somebody wants it. If I do not get what I want I will finish it one day.

**bobvilla67** · 09-13-2005, 11:46 AM

I have had my 2wd blazer since '93 and everyone wanted to buy it,now that I am willing to sell it no one wants to buy.

bigbluthng · 09-13-2005, 11:54 AM

search in the trucks for sale section. there was someone who posted they wanted to buy a project 67-72 and another guy replied he had a 2wd blazer. he's up north also.

bigbluthng · 09-13-2005, 12:00 PM

i just remembered the user name was John Fabris

clean71 · 09-14-2005, 09:05 AM

bobvilla,

can you pm me details on your 2wd? Thanks.

Yearn4Classics · 09-14-2005, 02:12 PM

Quote:

Originally Posted by bouncytruck

There is one for sale in Spokane, WA. $21,500. Looks nice, but the paint job isn't my thing.

http://adcache.collectorcartraderonl...0/80727260.htm

one in Pamona- $19,500
http://adcache.collectorcartraderonl...7/80689477.htm

one in San Diego - $12,500

http://adcache.collectorcartraderonl...2/80813362.htm

Wow, you really hae an eye out for them. The one I really like is the one in San Diego because its ready for me to restore but more than what Im willing to pay for one that needs everything' but thanks a lot for your help "Bouncytruck"

Yearn4Classics · 09-14-2005, 02:16 PM

Quote:

Originally Posted by 70short/step

There was a real nice one that was complete and running on Craigslist a couple of weeeks ago for $4500. It was in the Bay area too!

Thanks for the tip, but when I tried to look it up it was "Not Found" so hopefully h re-lists it so I can se if its an original 2wd Blazer not converted. Thanks again.

clean71 · 09-14-2005, 03:03 PM

The one on CL was converted.

Pop's72 · 09-14-2005, 03:04 PM

Quote:

Originally Posted by Yearn4Classics

Thanks for the tip, but when I tried to look it up it was "Not Found" so hopefully h re-lists it so I can se if its an original 2wd Blazer not converted. Thanks again.

FYI: The one on Craigslist for $4500 was a converted 4wd.

And the person listing never responded to emails.

clean71 · 09-17-2005, 01:36 PM

This one in Diamond Bar, CA looks decent. $6500 obo

http://images.traderonline.com/EMedi...0029787E13.jpg

09-12-2005, 04:48 PM	#1
Yearn4Classics Registered User Join Date: Jan 2005 Location: Napa Posts: 53	2WD Blazer WANTED 70-72 Just like most people on this site; I've been looking for a 2wd Blazer for a few years now with no luck. If anyone knows of any in California or has one for sale please let me know. Looking for one with minimal rust, could be a complete project; I plane to "frame off" it anyways. Thanks guys.

09-12-2005, 05:06 PM	#2
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	One of the guys is trying to sell one on the parts board... you might contact him... it is in texas and looks fairly solid. Hope this helps.... Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

09-12-2005, 05:07 PM	#3
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	There is one for sale in Spokane, WA. $21,500. Looks nice, but the paint job isn't my thing. http://adcache.collectorcartraderonl...0/80727260.htm one in Pamona- $19,500 http://adcache.collectorcartraderonl...7/80689477.htm one in San Diego - $12,500 http://adcache.collectorcartraderonl...2/80813362.htm __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

09-12-2005, 07:21 PM	#4
70short/step Registered User Join Date: Dec 2003 Location: Stockton, CA Posts: 1,579	There was a real nice one that was complete and running on Craigslist a couple of weeeks ago for $4500. It was in the Bay area too! __________________ For every person with a spark of genius, There are a hundred with ignition trouble. 70 Short/Step

09-13-2005, 11:46 AM	#6
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	I have had my 2wd blazer since '93 and everyone wanted to buy it,now that I am willing to sell it no one wants to buy. __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

09-13-2005, 12:23 AM	#5
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,522	I have one that if I get the money I want I will possibly sell. It is a Texas truck with good title. The only sheet metal that was replaced was the left and right floor pans where I guess the top leaked for a while. Rockers, rocker boxes, tailgate, doors, fenders, quarter, winshield frame have NO rust. The body has been modified, shaved doors, fenders shaved, quarters shaved, no gas hole, shaved markers, tailgate skin, rear roll pan, firwall shaved on a/c side. Dash has never been cut up. A/C cab. Have new grille inner and outer from Chevrolet and bowtie, not aftermarket. Coresupport is rust free. Body needs to be finished with some minor stuff. Doors have never been cut for speakers. Regulators have been blasted and painted. All new hardware for tailgate, Latches and locks, hidden handle kit (not installed). Frame was blasted and DP 74 primered. Rear trailing arms and front suspension have been painted dodge viper red. Lowered springs, complete new front end out of 87 Suburban crossmember. Van tilt column (needs to be cut). Rear end 3.73 gears brand new, new Auburn Posi with complete intsall kit and bearings still in packages. New body bushing kit. Every new weatherstrip possible. 1/2 inch aluminum fuel line for truck. New poly fuel tank kit, 355 small block professionaly built dynoed 425hp, Needs intake, rockers, carb, and accesories to complete motor. I have a 700r4 that needs built that goes with it. I have installed and drilled the rear coil over shock package from CPP industries. Dropped spindles and springs. Leather interior out of a Chrysler Sebring Convertible (almost new). All new lamps and lenses front and rear. Rechromed factory front bumper. The list goes on and on. I need 10,500.00 for it if somebody wants it. If I do not get what I want I will finish it one day.

09-13-2005, 11:54 AM	#7
bigbluthng Registered User Join Date: Aug 2003 Location: canyon country, ca, USA Posts: 336	search in the trucks for sale section. there was someone who posted they wanted to buy a project 67-72 and another guy replied he had a 2wd blazer. he's up north also. __________________

09-13-2005, 12:00 PM	#8
bigbluthng Registered User Join Date: Aug 2003 Location: canyon country, ca, USA Posts: 336	i just remembered the user name was John Fabris __________________

09-14-2005, 09:05 AM	#9
clean71 Registered User Join Date: Aug 2002 Location: San Diego, CA Posts: 335	bobvilla, can you pm me details on your 2wd? Thanks. __________________ CPO U.S. Navy(Ret) 1972 GMC Jimmy 4x4 Custom 1972 GMC Jimmy 2x4 Custom

09-14-2005, 03:03 PM	#12
clean71 Registered User Join Date: Aug 2002 Location: San Diego, CA Posts: 335	The one on CL was converted. __________________ CPO U.S. Navy(Ret) 1972 GMC Jimmy 4x4 Custom 1972 GMC Jimmy 2x4 Custom

09-17-2005, 01:36 PM	#14
clean71 Registered User Join Date: Aug 2002 Location: San Diego, CA Posts: 335	This one in Diamond Bar, CA looks decent. $6500 obo http://images.traderonline.com/EMedi...0029787E13.jpg __________________ CPO U.S. Navy(Ret) 1972 GMC Jimmy 4x4 Custom 1972 GMC Jimmy 2x4 Custom



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.