My truck is pretty much finished - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nitor · 09-27-2005, 09:11 PM

I thought I would post a few pics of my pretty much finished 1970 GMC. This used to be a 2wd. I put a 1988 4wd frame under.

RED72blazer · 09-27-2005, 09:14 PM

me likey

djracer · 09-27-2005, 09:14 PM

Looks like someones ready for a ride!

Kevin

nitor · 09-27-2005, 09:15 PM

That's my youngest Amanda.

LUV2XCLR8 · 09-27-2005, 09:27 PM

matthufham · 09-27-2005, 09:30 PM

the frame hangs fairly low on her, but it works for me. overall i like what i see there, though not much of a gmc guy.

al's71gmc · 09-27-2005, 09:37 PM

That is one very nice truck. Well done and congrts on finishing!!
What are the shoulder belts out of? One of the board vendors sells a setup like that for $160. It's one of the many things on my have to have list for both our trucks.

nitor · 09-27-2005, 09:39 PM

The bed's setting on the frame. I had to put a body lift under the cab just to bring it up in line with the bed.

The shoulder belts are out of a mid 80s full size Chevy.

**Yukon Jack** · 09-27-2005, 09:41 PM

Looks like a sweet ride. Don't see many 67-72 IFS 4x4's. Okay, actually, I'm pretty sure this is the first one I have seen. Would you do it again if you had to or go with an old straight axle frame?

nitor · 09-27-2005, 09:43 PM

I had to put extentions on the part of the belts that came through the seats. They weren't long enough. I would have to dig into the seat just to find them.

nitor · 09-27-2005, 10:14 PM

Quote:

Originally Posted by Yukon Jack

Looks like a sweet ride. Don't see many 67-72 IFS 4x4's. Okay, actually, I'm pretty sure this is the first one I have seen. Would you do it again if you had to or go with an old straight axle frame?

I'd do it again. Even with a straight axle frame. I did this for the ride, and because it's something you don't see every day, a 67-72 IFS 4x4.

**Boog** · 09-27-2005, 10:29 PM

[and because it's something you don't see every day, a 67-72 IFS 4x4.]
That's for sure. Other than the low hanging frame mid section who'd know it is not original? Was the wheel base the same? Sits nice and should ride real good.

70c10 · 09-27-2005, 10:42 PM

Nice job!

nitor · 09-27-2005, 11:08 PM

Quote:

Originally Posted by Boog

[and because it's something you don't see every day, a 67-72 IFS 4x4.]
That's for sure. Other than the low hanging frame mid section who'd know it is not original? Was the wheel base the same? Sits nice and should ride real good.

It rides great. The wheel base was 2 inches longer. I made up for an inch in the wheel wells, and the bed sets away from the cab about an inch more than it should.

kaycee · 09-27-2005, 11:28 PM

Nice job,

looks good

krue · 09-27-2005, 11:29 PM

Looks good to me!

barn9 · 09-28-2005, 01:59 AM

Looks good to me. Did you document the changeover with pics, etc? I'm sure there would be several people interested in the details of the swap.

nitor · 09-28-2005, 07:08 AM

Quote:

Originally Posted by barn9

Looks good to me. Did you document the changeover with pics, etc? I'm sure there would be several people interested in the details of the swap.

Ya know barn9 I didn't think to start taking pics until the cab was already swapped. I replaced the floor boards, rockers, cab corners. I even took the hump from the 88 and put it in this cab. I took a few pics of that stuff but not many. I started really taking pics when I had most of the body work done and started on the paint process. If anyone needs advice on the swap, I'll be more than happy to give any I can.

Joe67 · 09-28-2005, 07:27 AM

Nice work on that project

Putter · 09-28-2005, 09:45 AM

I see the newer shifter for the transfer case....but I can't believe that no one asked:
What about the engine and tranny???? Are they from the '88 truck? (5.7L w/ overdrive?)

blazerparts · 09-28-2005, 10:05 AM

nice work

70 shorty · 09-28-2005, 12:54 PM

Quote:

Originally Posted by djracer

Looks like someones ready for a ride!

Kevin

I was thinking the same thing. My little girls love to ride in my truck.

*72CSTC5* · 09-28-2005, 03:05 PM

That is sweet.

dion · 09-28-2005, 04:00 PM

Looks nice! and I must say, great color choice.

weasel29gm · 09-28-2005, 10:38 PM

Nice ride!!!!!!

09-27-2005, 09:11 PM	#1
nitor Too many projects Join Date: Aug 2002 Location: Morrow, OH Posts: 344	My truck is pretty much finished I thought I would post a few pics of my pretty much finished 1970 GMC. This used to be a 2wd. I put a 1988 4wd frame under. Attached Images __________________ Jim '55 Chevrolet Pickup '56 Chevrolet Belair '04 Chevrolet Astro '95 Chevrolet Blazer

09-27-2005, 09:14 PM	#2
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	me likey __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.

09-27-2005, 09:14 PM	#3
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Very Nice truck Looks like someones ready for a ride! Kevin __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-27-2005, 09:15 PM	#4
nitor Too many projects Join Date: Aug 2002 Location: Morrow, OH Posts: 344	That's my youngest Amanda. __________________ Jim '55 Chevrolet Pickup '56 Chevrolet Belair '04 Chevrolet Astro '95 Chevrolet Blazer

09-27-2005, 09:27 PM	#5
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	__________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-27-2005, 09:30 PM	#6
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	the frame hangs fairly low on her, but it works for me. overall i like what i see there, though not much of a gmc guy.

09-27-2005, 09:37 PM	#7
al's71gmc 4 eyed fever Join Date: Jul 2005 Location: Eureka, Nevada Posts: 500	That is one very nice truck. Well done and congrts on finishing!! What are the shoulder belts out of? One of the board vendors sells a setup like that for $160. It's one of the many things on my have to have list for both our trucks. __________________ 1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!!

09-27-2005, 09:39 PM	#8
nitor Too many projects Join Date: Aug 2002 Location: Morrow, OH Posts: 344	The bed's setting on the frame. I had to put a body lift under the cab just to bring it up in line with the bed. The shoulder belts are out of a mid 80s full size Chevy. __________________ Jim '55 Chevrolet Pickup '56 Chevrolet Belair '04 Chevrolet Astro '95 Chevrolet Blazer Last edited by nitor; 09-27-2005 at 09:41 PM.

09-27-2005, 09:41 PM	#9
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Looks like a sweet ride. Don't see many 67-72 IFS 4x4's. Okay, actually, I'm pretty sure this is the first one I have seen. Would you do it again if you had to or go with an old straight axle frame? __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

09-27-2005, 09:43 PM	#10
nitor Too many projects Join Date: Aug 2002 Location: Morrow, OH Posts: 344	I had to put extentions on the part of the belts that came through the seats. They weren't long enough. I would have to dig into the seat just to find them. __________________ Jim '55 Chevrolet Pickup '56 Chevrolet Belair '04 Chevrolet Astro '95 Chevrolet Blazer

09-27-2005, 10:29 PM	#12
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,103	[and because it's something you don't see every day, a 67-72 IFS 4x4.] That's for sure. Other than the low hanging frame mid section who'd know it is not original? Was the wheel base the same? Sits nice and should ride real good. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

09-27-2005, 10:42 PM	#13
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Nice job! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

09-27-2005, 11:28 PM	#15
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,445	Nice job, looks good __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327

09-27-2005, 11:29 PM	#16
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Looks good to me! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

09-28-2005, 01:59 AM	#17
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	Looks good to me. Did you document the changeover with pics, etc? I'm sure there would be several people interested in the details of the swap. __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.



Register or Log In To remove these advertisements.

09-28-2005, 07:27 AM	#19
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Nice work on that project __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

09-28-2005, 09:45 AM	#20
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	I see the newer shifter for the transfer case....but I can't believe that no one asked: What about the engine and tranny???? Are they from the '88 truck? (5.7L w/ overdrive?) __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

09-28-2005, 10:05 AM	#21
blazerparts No,I DON'T have Tourett's Join Date: Mar 2005 Location: Reno, NV Posts: 556	nice work __________________ '72 K5 CST 350/350 Daily Driver '69 GMC3500 Camper Special CST Flatbed 396/400 Upgraded to show truck '69 GMC 2500 L6292, 3spd beater

09-28-2005, 03:05 PM	#23
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	That is sweet.

09-28-2005, 04:00 PM	#24
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	Looks nice! and I must say, great color choice. __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

09-28-2005, 10:38 PM	#25
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,091	Nice ride!!!!!! __________________ 69 C-10, OWNED 35YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

Register or Log In To remove these advertisements.