Parts, Parts, Parts Galore - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stelth2002 · 10-01-2005, 09:26 PM

Its getting time for the white stuff to fly and I need to clear some space. If you are interested in anything in the pics and I missed it or it seems high let me know. The prices are listed below, add shipping.

Lower Prices

NEW:
Newer Rally Rims with flawless TrimRings and Bowtie Caps (16x7 - 6 lug) 4 for 200$

1. Heater Control - Has one broken lever - $12
2. Chevrolet Horn Button - 10$
3. GMC Horn Button - 15$
4. Panhard Bar - Has useable bushing - could use new ones - 10$
5. Fan Motor or Complete Outside Box for a 73-80 truck with Fan [Fan is same as 67-72] 10$ for Both
6. Passenger Side Taillight Benzel. Has some scratches small scratches on one side - 5$
7. Passenger and Driver side Window Regulators - $15 each
8. Visor Rods and Brackets - 5$
9. Seat of Door Hinges (I have both sides) - 20 a side
10. Windshield Wipers (2 Pairs) - 20 a pair
11. Windshield Wiper Motor/Pump - 30$ (The price of a core)
12. Points Chev v8 Dizzy - 10$ (this was in my 327 and works)
13. Set of 12 bolt 6 lug axles. Good races and lugs. 45$ (pair)
14. Fan Clutch - 5$
15. Upper A-Arms 67-70 Ball Joints (Driver Condition) - 75 (pair) 40 a piece
16. 6 Clyinder Power Steering Pump with bracket- 20$
17. Front 4wd Cap - 5$
18. Various Side Molding - 6$ Each (Driver Condition)
19. All the various lenses - 1$ Each
20. Ralley Rims (5 of them - Not bent, Need painted, not pitted) 100$ (set) -SOLD
21. SWB Bedsides - 150 Each 250 Both
22. Rear 12 bolt Pan - 10$
23. 12 bolt rear (ready to bolt in - 373 if I remember right) 125$

Post here or email me at metalmile@gmail.com
Thanks and I want to sell it all, I need another project

stelth2002 · 10-01-2005, 09:36 PM

....

stelth2002 · 10-01-2005, 09:42 PM

......

stelth2002 · 10-01-2005, 09:48 PM

..

stelth2002 · 10-01-2005, 09:56 PM

...

chevy_fatman · 10-01-2005, 09:57 PM

Intersted on #16. 6 Clyinder Power Steering Pump with bracket- 25$ does it have the pulley too, let me know.

chevy_fatman · 10-01-2005, 10:00 PM

Also, do you have the pulley that goes on the motor to run this pump?

stelth2002 · 10-01-2005, 10:00 PM

....

stelth2002 · 10-01-2005, 10:04 PM

Paul, The pump does have a pulley, what you see in the pic is all that I have. I couldnt use it on mine. I believe it is off a newer 250.

Thanks

camaro__thunder · 10-01-2005, 11:57 PM

If Paul doesnt want it I need it if its for a integral head. (81 250ci)

chevy_fatman · 10-02-2005, 10:28 PM

It looks like camaro__thunder needs it more than I do, I'm just hoarding parts let him have a chance at it.

Thanks. Paul.

**chevy71super** · 10-03-2005, 03:16 PM

Are the moldings for long or short bed? If short bed I will take the four lower trim pieces that go on the box. Please advise. Thank you.

stelth2002 · 10-03-2005, 11:24 PM

PM sent to chevy71super

stelth2002 · 10-05-2005, 12:08 AM

I am unsure if these are long bed or short bed pieces. How does one tell?

stelth2002 · 10-07-2005, 09:14 PM

ttt

ol yellow 72 · 10-08-2005, 05:27 PM

how much for the heater switches shipped to 40008

byrd · 10-08-2005, 08:01 PM

I would like to see some better pics of the bedsides as I'm interested in them. Would you e willing to ship them greyhound to 40272? Randy

stelth2002 · 10-08-2005, 09:25 PM

ol yellow 72, it looks like shipping via fedex is 10 bucks. In an effort to give you a good deal, 9 for shipping. I sent you a PM. Let me know, and I'll get it ready.

Geezer · 10-09-2005, 10:03 PM

Is that 67-68 piece of cab corner trim for the passenger side?

stelth2002 · 10-11-2005, 02:09 PM

Geezer, I will have to look at the piece and see. I will get back to you.

stelth2002 · 10-12-2005, 12:54 PM

ttt

stelth2002 · 10-20-2005, 01:56 AM

The Column, Panhad bar and horn button are gone.

Also Geezer, the trim is you are looking at is for the drivers side.

94gmc454 · 02-01-2006, 12:09 PM

I'm looking for a GMC horn cap like you have but the picture is kinda fuzzy. Is it a painted version? Were there chrome ones? Thanks.

**BOSS** · 02-01-2006, 01:40 PM

what kind of shape are the bedsdes in?what year?would you consider shipping?my son is looking thanx..

*1969owner* · 02-01-2006, 03:18 PM

how much for the side markers?

10-01-2005, 09:36 PM	#2
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	More Pics .... Attached Images __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

10-01-2005, 09:42 PM	#3
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	More Pics ...... Attached Images __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

10-01-2005, 09:48 PM	#4
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	More Pics .. Attached Images __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

10-01-2005, 09:56 PM	#5
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	More Pics ... Attached Images __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

10-01-2005, 09:57 PM	#6
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	Intersted on #16. 6 Clyinder Power Steering Pump with bracket- 25$ does it have the pulley too, let me know. __________________ Paul How do you make the invisible, visible?.........You take it away.

10-01-2005, 09:26 PM	#1
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Parts, Parts, Parts Galore Its getting time for the white stuff to fly and I need to clear some space. If you are interested in anything in the pics and I missed it or it seems high let me know. The prices are listed below, add shipping. Lower Prices NEW: Newer Rally Rims with flawless TrimRings and Bowtie Caps (16x7 - 6 lug) 4 for 200$ 1. Heater Control - Has one broken lever - $12 2. Chevrolet Horn Button - 10$ 3. GMC Horn Button - 15$ 4. Panhard Bar - Has useable bushing - could use new ones - 10$ 5. Fan Motor or Complete Outside Box for a 73-80 truck with Fan [Fan is same as 67-72] 10$ for Both 6. Passenger Side Taillight Benzel. Has some scratches small scratches on one side - 5$ 7. Passenger and Driver side Window Regulators - $15 each 8. Visor Rods and Brackets - 5$ 9. Seat of Door Hinges (I have both sides) - 20 a side 10. Windshield Wipers (2 Pairs) - 20 a pair 11. Windshield Wiper Motor/Pump - 30$ (The price of a core) 12. Points Chev v8 Dizzy - 10$ (this was in my 327 and works) 13. Set of 12 bolt 6 lug axles. Good races and lugs. 45$ (pair) 14. Fan Clutch - 5$ 15. Upper A-Arms 67-70 Ball Joints (Driver Condition) - 75 (pair) 40 a piece 16. 6 Clyinder Power Steering Pump with bracket- 20$ 17. Front 4wd Cap - 5$ 18. Various Side Molding - 6$ Each (Driver Condition) 19. All the various lenses - 1$ Each 20. Ralley Rims (5 of them - Not bent, Need painted, not pitted) 100$ (set) -SOLD 21. SWB Bedsides - 150 Each 250 Both 22. Rear 12 bolt Pan - 10$ 23. 12 bolt rear (ready to bolt in - 373 if I remember right) 125$ Post here or email me at metalmile@gmail.com Thanks and I want to sell it all, I need another project Attached Images __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!! Last edited by stelth2002; 10-08-2005 at 01:31 PM.

10-01-2005, 10:00 PM	#7
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	Also, do you have the pulley that goes on the motor to run this pump? __________________ Paul How do you make the invisible, visible?.........You take it away.

10-01-2005, 10:04 PM	#9
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Paul, The pump does have a pulley, what you see in the pic is all that I have. I couldnt use it on mine. I believe it is off a newer 250. Thanks __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

10-01-2005, 11:57 PM	#10
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	If Paul doesnt want it I need it if its for a integral head. (81 250ci) __________________ My Project 69 SWB SHAVED BAGGED DOORED

10-02-2005, 10:28 PM	#11
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	It looks like camaro__thunder needs it more than I do, I'm just hoarding parts let him have a chance at it. Thanks. Paul. __________________ Paul How do you make the invisible, visible?.........You take it away.

10-03-2005, 03:16 PM	#12
chevy71super Registered User Join Date: Jan 2002 Location: So Cal Posts: 658	Are the moldings for long or short bed? If short bed I will take the four lower trim pieces that go on the box. Please advise. Thank you. __________________ 71 Cheyenne Super 4X4 SB 72 Cheyenne Super 4X4 SB 72 Cheyenne 4X4 SB

10-03-2005, 11:24 PM	#13
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	PM sent to chevy71super __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

10-05-2005, 12:08 AM	#14
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	I am unsure if these are long bed or short bed pieces. How does one tell? __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

10-07-2005, 09:14 PM	#15
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	ttt __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

10-08-2005, 05:27 PM	#16
ol yellow 72 Registered User Join Date: Aug 2005 Location: kentucky Posts: 210	how much for the heater switches shipped to 40008



Register or Log In To remove these advertisements.

10-08-2005, 09:25 PM	#18
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	ol yellow 72, it looks like shipping via fedex is 10 bucks. In an effort to give you a good deal, 9 for shipping. I sent you a PM. Let me know, and I'll get it ready. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

10-09-2005, 10:03 PM	#19
Geezer Registered User Join Date: May 2005 Location: Spring Branch Texas Posts: 177	Is that 67-68 piece of cab corner trim for the passenger side?

10-11-2005, 02:09 PM	#20
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Geezer, I will have to look at the piece and see. I will get back to you. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

10-12-2005, 12:54 PM	#21
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	ttt __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

10-20-2005, 01:56 AM	#22
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Re: Parts, Parts, Parts Galore The Column, Panhad bar and horn button are gone. Also Geezer, the trim is you are looking at is for the drivers side. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!! Last edited by stelth2002; 10-20-2005 at 02:00 AM.

02-01-2006, 12:09 PM	#23
94gmc454 Registered User Join Date: May 2003 Location: Ithaca, NY Posts: 34	Re: Parts, Parts, Parts Galore I'm looking for a GMC horn cap like you have but the picture is kinda fuzzy. Is it a painted version? Were there chrome ones? Thanks.

02-01-2006, 01:40 PM	#24
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	Re: Parts, Parts, Parts Galore what kind of shape are the bedsdes in?what year?would you consider shipping?my son is looking thanx.. __________________ Support our site Norwood Survivor

02-01-2006, 03:18 PM	#25
1969owner Account Suspended Join Date: Dec 2005 Location: martin georgia Posts: 568	Re: Parts, Parts, Parts Galore how much for the side markers?

Register or Log In To remove these advertisements.