What did you get done? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**N2TRUX** · 10-02-2005, 06:48 PM

This was a pretty hectic week since I was trying to get cauf=ght up from all the days I lost due to Hurricane Rita. Since my wife was out of commission I had to work alone this week.

Wednesday, Thursday and Saturday was spent watching my daughters middle school volleyball team play their tournament. The made it to the final four on Saturday. This was pretty exciting since the top four teams were made up of players from my daughters club volleyball teams.

The end result is they couldn't work together as a team and wound up in fourth place. That's not bad, but it should have been better based on the talent they have on their team. Two weeks ago the beat the second place team with ease. Oh well, it just wasn't their day.

I had planned to go to Goodguys in Ft Worth but that got cancelled due to the tournament on Saturday. I had a couple of buddies that were going to debut their latest hot rods there.

What did you get done?

Steve Green rolled out his latest truck project. More pice here

squint · 10-02-2005, 07:10 PM

Wow.. thats a sweet looking ride..

I managed to get my new buckets installed.. you guys can see the pics and stuff Here

I have been scouring the net for some nice seat coveres.. They are in such good shape, i really want to keep them that way.. Any ideas?

Other than that, I have accually been taking it easy..

ElGracho · 10-02-2005, 07:18 PM

I turned most of this:

Into the heap in the back of my crew cab:

I saved the interior, the glass, the engine and trans and the front suspension for my project truck. The rest went the way of the sawzall...

bigblock73 · 10-02-2005, 07:19 PM

I spent about an hour or two on Yeller today...mounted up my drop down battery tray. I would have worked a little longer on it, but I cut open my knuckle pretty good when the wrench slipped...so I called it a day.

**JIMs70GMC** · 10-02-2005, 07:43 PM

I repacked my front wheel bearings and found I have a bad lower ball joint on the driver side. Did get my yard aerated and seeded this weekend too. Took a couple 50 mile trips in the burb, new tranny is doing great.

SSC's76 · 10-02-2005, 08:04 PM

I spent a couple hours digging up a side miror that vanished. I want to put the OEM style mirros back on the truck when the new doors go on. I found the other mirror but cant seem to locate the brackets or rubbers.

Also rebuilt and recurved the dizzy for the 86. The dizzy was totaly jacked and the bushing came out. I used the older electronics in a newer ESC setup and slaped in a adjustable vac can and new springs. Works great.

Next weekend I'm going to find the clear signal lights that are floating in the garage. I always find one put it back then find the other then loose the first one.

**swervin ervin** · 10-02-2005, 09:13 PM

Let's see. Friday, I went to the muffler shop and got my exhaust all welded up and the hangers welded so I could take off the shotty looking muffler clamps. I am in love with the sound of my exhaust now. It's quiet for the most part. Still louder than stock but this is to be expected with headers and all. Saturday went to Advance auto parts and used the coupon posted my XXL.

http://207.44.196.117/vboard/showthread.php3?t=175122

Anyway, I bought a red caliper painting kit made by Duplicolor. I spent the rest of Saturday cleaning and sanding off the rust on my new rotors. Painted the rotors with some Ralley silver paint I had and used the kit to paint the calipers a beautiful red. Painted the pads gloss black. This was the fronts. Today, I had to help the wife put a fancy dancy bird house on a post in the yard. In the meantime I was working on painting the rear calipers and rotors.

Right in the middle of it all, my sister-in-law asked me to go over to her house and cut off some of her counter tops in the kitchen to get ready for her new appliances. She had a drop in oven and is replacing it with a regular unit, so I had to cut out the back of the top and the base of the cabinet. I didn't have to take any pains with it all since she is also getting some new counter tops.

I still didn't finish my rear rotors and calipers. I'll finish tomorrow evening, maybe.

78SilveradoSWB · 10-02-2005, 09:56 PM

Bought a new truck. 2000 C-1500 Sportside.

**RPOZ11** · 10-02-2005, 10:44 PM

I went from non tilt to tilt...

**RPOZ11** · 10-02-2005, 10:46 PM

The switch for the key cylinder under the dash was weird.
It was an upside down switch and my original unit, I swapped them-temporarily, would start the engine when you turn the key to Locked position!!!
That freaked me out, as I had the trans lever off and it was engaged in drive!!!!

Anyways, I reinstalled the switch that was on it and the wiring ended up being reversed vs the original installation. The power 12-volt source is towards the wheel vs towards the firewall and the connection is upside down too!
All too weird but eventually I got it down!
It works!

79BIG10 · 10-02-2005, 11:14 PM

Quote:

Originally Posted by bigblock73

I spent about an hour or two on Yeller today...mounted up my drop down battery tray. I would have worked a little longer on it, but I cut open my knuckle pretty good when the wrench slipped...so I called it a day.

That's freaking sweet Jeff!!! Where did you find that thing? I couldn't use it on my setup but that's freaking genius!! What are you doing with the extra room in the engine bay?

bagged74 · 10-02-2005, 11:27 PM

Quote:

Originally Posted by bigblock73

I cut open my knuckle pretty good when the wrench slipped...so I called it a day.

I will vouch for those battery boxes being razor sharp. I cut myself pretty good on the one that I installed also.

i did nothing truck related, I worked all weekend on a custom stereo install in a new Subaru Legacy GT 2.5 , pretty cool car. I did manage to find time to clean my fish tank though

Jonboy · 10-02-2005, 11:40 PM

I didn't get anytyhing truck related done this weekend either. I did go pick up our new (to us) boat today. We were supposed to go to Houston last weekend to get it, but the hurricane kinda got in the way. Got it home and got it cleaned up. This should make a pretty nice boat. It is a 20' Thompson Carrera 200. No pics yet, though, as it got too dark.

Next weekend I should get the trans finished up and a tuneup done on the Jimmy, though.

static22 · 10-03-2005, 12:50 AM

Had 10 little girls over for a slumber party for my daughters 8th birthday. Come morning was ready to call the insurance company. The dogs were freaked out and no one got any sleep. My daughter said it was her best birthday ever. Spent Saturday counting the dead and cleaning up the carnage, then the family came over for that phase of the birthday party. The girl now has more cash than I do. Trying to convince her she needs parts for my truck but she's not buying it. On Sunday everyone slept!

bad_burb · 10-03-2005, 01:36 AM

On my "weekend" I started my new fence installation which will inclued a covered area on the side of the house for the Burb. I have gotten all but three holes dug due to some nasty clay soil. It is packed so much I may have to resort to a jackhammer. The resent heat hasn't made it any easier either. The posts that can be installed have been and some fence boards have even gone up. All in all I am moving along slow and steady.
I also had to try to convince my wife to let me buy a "donor" suburban even though I have absolutly no where to put it. I just can't pass it up. Next week... more fence.

Justins76 · 10-03-2005, 01:54 AM

Got rid of the squealing alt cog cheapie belt, put in a new turn signal bulb and high beam indicator bulb.

apstguy · 10-03-2005, 02:19 AM

I ordered electronics parts for my LED projects. That's it. I'm not allowed to do any physical labor yet

bigblock73 · 10-03-2005, 07:22 AM

Quote:

Originally Posted by 79BIG10

That's freaking sweet Jeff!!! Where did you find that thing? I couldn't use it on my setup but that's freaking genius!! What are you doing with the extra room in the engine bay?

Thanks B, I like it a lot too! I got it from CCP. I wanted the engine bay as clean as possible, so I mounted the battery under the bed.

Quote:

Originally Posted by bagged74

I will vouch for those battery boxes being razor sharp. I cut myself pretty good on the one that I installed also.

I know now too! The funny/sad thing is, when I was tightening down the LAST bolt, I told myself "be careful Jeff, the wrench could slip in this position and bad things could happen"...well, just as I was thinking that...BAM!!! You know the rest of the story.

1987 Shortwide · 10-03-2005, 07:50 AM

I really like that box Jeff. Too bad NHRA would probably have a cow when I tried to Tech in with it like that...

Non truck related, I watched my nephew's football game saturday morning, then went to my neices 6th birthday party at this gymnastics place where I reminded myself just how out of shape I really am. Sunday consisted mainly of studying for class.

Late last week I rolled the truck out and spent about an hour with the industrial power washer and 248* water cleaning up the underbody and frame. I think I'm just going to get a quart of the spray ready eastwood OEM frame coating and go to town with that. Hopefully today (monday now) I can get down to get some body adhesive because I found mine was old and junk when I went to put my filler panels on the firewall sunday afternoon.

bigblock73 · 10-03-2005, 07:55 AM

Quote:

Originally Posted by 1987 Shortwide

I really like that box Jeff. Too bad NHRA would probably have a cow when I tried to Tech in with it like that...

Why is that? It is a secure box, that when in the up position, is no different than having a battery under the hood. Unless, having the battery exposed and not "enclosed" would cause a problem?

koreric75 · 10-03-2005, 08:16 AM

This weekend i tinted the back glass, 5%, and attempted a 5" strip on the windshield, had to pull it back off. Replaced the powersteering pump and installed a Summit power steering pumpbracket to correct the alignment, though i saw a thread about that somewhere, i ended up haveing to use a 77 C-10 PS Pump with the threaded hole in the (facing the rear of pump) 5 o'clock position. Put on new alt & PS belt while i was at it. Going to Pipe's U Pull it today to locate various parts. I'm taking more pics today to post as well. A couple of months ago i used the roll in bedliner to redo the inside of the cab from the firewall to the bottom of the back glass.

86swb · 10-03-2005, 10:28 AM

Not much of anything really. Sat in both the '86 and '70 thinking about things I want to do when I get some $$$$. Other than that, just regular chores around the house.

86 GMG · 10-03-2005, 10:45 AM

friday a saturday i worked counting inventory at my job sunday the family and i (1 year old little boy and my wife went house shopping tnot much else

**Captkaos** · 10-03-2005, 11:33 AM

I spent some time evaluating some Dashes Direct 73-80 and 81-87 dashes. I ordered 10 for sale on the site and some of them could use some improvement, so hopefully they will work with me and make this a better product. They have GREAT potential for being a restoration piece, but right now, they are just replacement quality.

On battery boxes, I bought this one a LONG time ago:
http://www.performancebodies.com/sto...&dept%5Fid=610

But I have the one Jeff has also. I have decided to use that one. If you think the one Jeff listed would fail tech because of the drop down, the one I listed might work for you. If you want it, I will sell it to you.

modmach1 · 10-03-2005, 11:33 AM

Picked up a 327 and TH350, Bucket seats from a 78 Blazer, and bought a 79 Vw Rabbit....

10-02-2005, 06:48 PM	#1
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	What did you get done? This was a pretty hectic week since I was trying to get cauf=ght up from all the days I lost due to Hurricane Rita. Since my wife was out of commission I had to work alone this week. Wednesday, Thursday and Saturday was spent watching my daughters middle school volleyball team play their tournament. The made it to the final four on Saturday. This was pretty exciting since the top four teams were made up of players from my daughters club volleyball teams. The end result is they couldn't work together as a team and wound up in fourth place. That's not bad, but it should have been better based on the talent they have on their team. Two weeks ago the beat the second place team with ease. Oh well, it just wasn't their day. I had planned to go to Goodguys in Ft Worth but that got cancelled due to the tournament on Saturday. I had a couple of buddies that were going to debut their latest hot rods there. What did you get done? Steve Green rolled out his latest truck project. More pice here __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

10-02-2005, 07:18 PM	#3
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,553	I turned most of this: Into the heap in the back of my crew cab: I saved the interior, the glass, the engine and trans and the front suspension for my project truck. The rest went the way of the sawzall... __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed Last edited by ElGracho; 10-02-2005 at 07:19 PM.

10-02-2005, 07:19 PM	#4
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	I spent about an hour or two on Yeller today...mounted up my drop down battery tray. I would have worked a little longer on it, but I cut open my knuckle pretty good when the wrench slipped...so I called it a day. Attached Images __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

10-02-2005, 07:43 PM	#5
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	I repacked my front wheel bearings and found I have a bad lower ball joint on the driver side. Did get my yard aerated and seeded this weekend too. Took a couple 50 mile trips in the burb, new tranny is doing great. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

10-02-2005, 08:04 PM	#6
SSC's76 No No Join Date: Jun 2005 Location: Pueblo Colorado Posts: 1,781	I spent a couple hours digging up a side miror that vanished. I want to put the OEM style mirros back on the truck when the new doors go on. I found the other mirror but cant seem to locate the brackets or rubbers. Also rebuilt and recurved the dizzy for the 86. The dizzy was totaly jacked and the bushing came out. I used the older electronics in a newer ESC setup and slaped in a adjustable vac can and new springs. Works great. Next weekend I'm going to find the clear signal lights that are floating in the garage. I always find one put it back then find the other then loose the first one. __________________ 1976 Custom Deluxe SWB Med FMB.3/4 Drop. Gen VI 454, Muncie HD 3 speed With Modified OE Hurst Shifter, 3.73 12 bolt, GMPP HO roller cam, Hooker headers, Performer intake with modified Q-jet, Accel distributor. Best 1/4 12.3 @108. Funnest run 19.84 @88 full 1/4 mile burn out. 1997 K1500 ext cab 5.7 stock except muffler

10-02-2005, 07:10 PM	#2
squint Registered User Join Date: Jul 2005 Location: Vancouver Posts: 195	Wow.. thats a sweet looking ride.. I managed to get my new buckets installed.. you guys can see the pics and stuff Here I have been scouring the net for some nice seat coveres.. They are in such good shape, i really want to keep them that way.. Any ideas? Other than that, I have accually been taking it easy..

10-02-2005, 09:13 PM	#7
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Let's see. Friday, I went to the muffler shop and got my exhaust all welded up and the hangers welded so I could take off the shotty looking muffler clamps. I am in love with the sound of my exhaust now. It's quiet for the most part. Still louder than stock but this is to be expected with headers and all. Saturday went to Advance auto parts and used the coupon posted my XXL. http://207.44.196.117/vboard/showthread.php3?t=175122 Anyway, I bought a red caliper painting kit made by Duplicolor. I spent the rest of Saturday cleaning and sanding off the rust on my new rotors. Painted the rotors with some Ralley silver paint I had and used the kit to paint the calipers a beautiful red. Painted the pads gloss black. This was the fronts. Today, I had to help the wife put a fancy dancy bird house on a post in the yard. In the meantime I was working on painting the rear calipers and rotors. Right in the middle of it all, my sister-in-law asked me to go over to her house and cut off some of her counter tops in the kitchen to get ready for her new appliances. She had a drop in oven and is replacing it with a regular unit, so I had to cut out the back of the top and the base of the cabinet. I didn't have to take any pains with it all since she is also getting some new counter tops. I still didn't finish my rear rotors and calipers. I'll finish tomorrow evening, maybe. __________________ Mike 1985 Chevy C-10

10-02-2005, 09:56 PM	#8
78SilveradoSWB Senior Member Join Date: Apr 2002 Location: Beaverton, OR Posts: 1,615	Bought a new truck. 2000 C-1500 Sportside. Attached Images __________________ Mitch 1978 Chevrolet Silverado C 10 454 BB, TH400

10-02-2005, 10:44 PM	#9
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	I went from non tilt to tilt... Attached Images __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

10-02-2005, 10:46 PM	#10
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	The switch for the key cylinder under the dash was weird. It was an upside down switch and my original unit, I swapped them-temporarily, would start the engine when you turn the key to Locked position!!! That freaked me out, as I had the trans lever off and it was engaged in drive!!!! Anyways, I reinstalled the switch that was on it and the wiring ended up being reversed vs the original installation. The power 12-volt source is towards the wheel vs towards the firewall and the connection is upside down too! All too weird but eventually I got it down! It works! __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS Last edited by RPOZ11; 10-02-2005 at 10:49 PM.

10-02-2005, 11:40 PM	#13
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	I didn't get anytyhing truck related done this weekend either. I did go pick up our new (to us) boat today. We were supposed to go to Houston last weekend to get it, but the hurricane kinda got in the way. Got it home and got it cleaned up. This should make a pretty nice boat. It is a 20' Thompson Carrera 200. No pics yet, though, as it got too dark. Next weekend I should get the trans finished up and a tuneup done on the Jimmy, though. __________________ 1974 Jimmy- 5.3/4L80e/NP241

10-03-2005, 12:50 AM	#14
static22 Registered User Join Date: Apr 2004 Location: oklahoma city Posts: 62	Had 10 little girls over for a slumber party for my daughters 8th birthday. Come morning was ready to call the insurance company. The dogs were freaked out and no one got any sleep. My daughter said it was her best birthday ever. Spent Saturday counting the dead and cleaning up the carnage, then the family came over for that phase of the birthday party. The girl now has more cash than I do. Trying to convince her she needs parts for my truck but she's not buying it. On Sunday everyone slept! __________________ Shaved '77 Silverado Last edited by static22; 10-03-2005 at 12:52 AM.

10-03-2005, 01:36 AM	#15
bad_burb Registered User Join Date: Aug 2005 Location: Vallejo, California Posts: 659	manual labor On my "weekend" I started my new fence installation which will inclued a covered area on the side of the house for the Burb. I have gotten all but three holes dug due to some nasty clay soil. It is packed so much I may have to resort to a jackhammer. The resent heat hasn't made it any easier either. The posts that can be installed have been and some fence boards have even gone up. All in all I am moving along slow and steady. I also had to try to convince my wife to let me buy a "donor" suburban even though I have absolutly no where to put it. I just can't pass it up. Next week... more fence.

10-03-2005, 01:54 AM	#16
Justins76 OutOfMyMind & I'llNeverKnowWhy Join Date: Apr 2004 Location: Another world, some other time Posts: 672	Got rid of the squealing alt cog cheapie belt, put in a new turn signal bulb and high beam indicator bulb. __________________ -Justin-Out of my mind and I'll never know why 1976 Chevrolet Silverado C10 350 4bbl / TH350 Big10 longbed 1986 Pontiac Firebird T-Top 5.0L TPI 700R4 WS6 1992 Pontiac Firebird T-Top 5.0L TBI 700R4 My cardomain page I don't like to save, it's more fun to spend!!

10-03-2005, 02:19 AM	#17
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	I ordered electronics parts for my LED projects. That's it. I'm not allowed to do any physical labor yet __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32



Register or Log In To remove these advertisements.

10-03-2005, 07:50 AM	#19
1987 Shortwide Senior Member Join Date: Feb 2003 Location: Wichita KS Posts: 610	I really like that box Jeff. Too bad NHRA would probably have a cow when I tried to Tech in with it like that... Non truck related, I watched my nephew's football game saturday morning, then went to my neices 6th birthday party at this gymnastics place where I reminded myself just how out of shape I really am. Sunday consisted mainly of studying for class. Late last week I rolled the truck out and spent about an hour with the industrial power washer and 248* water cleaning up the underbody and frame. I think I'm just going to get a quart of the spray ready eastwood OEM frame coating and go to town with that. Hopefully today (monday now) I can get down to get some body adhesive because I found mine was old and junk when I went to put my filler panels on the firewall sunday afternoon. __________________ ~Steve~ Friesen High Performance Auto and Graphics Toy: 87 Shortwide, 406 smallblock with a little boost My 87 buildup Daily Driver: 99 Sierra SLE 4X4. Black on Black and harder than hell to keep clean.

10-03-2005, 08:16 AM	#21
koreric75 83C10SWB Join Date: Sep 2005 Location: Bossier City, Louisiana Posts: 69	This weekend i tinted the back glass, 5%, and attempted a 5" strip on the windshield, had to pull it back off. Replaced the powersteering pump and installed a Summit power steering pumpbracket to correct the alignment, though i saw a thread about that somewhere, i ended up haveing to use a 77 C-10 PS Pump with the threaded hole in the (facing the rear of pump) 5 o'clock position. Put on new alt & PS belt while i was at it. Going to Pipe's U Pull it today to locate various parts. I'm taking more pics today to post as well. A couple of months ago i used the roll in bedliner to redo the inside of the cab from the firewall to the bottom of the back glass. Attached Images

10-03-2005, 10:28 AM	#22
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Not much of anything really. Sat in both the '86 and '70 thinking about things I want to do when I get some $$$$. Other than that, just regular chores around the house. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

10-03-2005, 10:45 AM	#23
86 GMG Registered User Join Date: Apr 2005 Location: Tulsa Oklahoma Posts: 943	friday a saturday i worked counting inventory at my job sunday the family and i (1 year old little boy and my wife went house shopping tnot much else __________________ square body trucks an addiction or an investment either way they consume all my extra time and money

10-03-2005, 11:33 AM	#24
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	I spent some time evaluating some Dashes Direct 73-80 and 81-87 dashes. I ordered 10 for sale on the site and some of them could use some improvement, so hopefully they will work with me and make this a better product. They have GREAT potential for being a restoration piece, but right now, they are just replacement quality. On battery boxes, I bought this one a LONG time ago: http://www.performancebodies.com/sto...&dept%5Fid=610 But I have the one Jeff has also. I have decided to use that one. If you think the one Jeff listed would fail tech because of the drop down, the one I listed might work for you. If you want it, I will sell it to you. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

10-03-2005, 11:33 AM	#25
modmach1 Registered User Join Date: Sep 2004 Location: Norway Posts: 152	Picked up a 327 and TH350, Bucket seats from a 78 Blazer, and bought a 79 Vw Rabbit.... __________________ http://www.moldestuket.com 1971 Mustang Mach-1 429 CJ-R 1973 Mustang Mach-1 289 1975/71 Pontiac Firebird Formula 400 1978 Chevrolet C-10 Fleetside Longbed Scottsdale 1980 Pontiac Phoenix

Register or Log In To remove these advertisements.