Free is a very good price - The 1947 - Present Chevrolet & GMC Truck Message Board Network

COBRO · 10-04-2005, 01:09 PM

Im tired of looking at this stuff and its taking up too much space.Have tried selling and nobody wants it so will see if anyone wants to come get it. You can come these parts and Im not shipping anything - located in Central Oregon - if nobody wants any of it then it will go to the dump. All came out of 72 C-20.

SM 465 trans with bell housing,flywheel,clutch disk and pressure plate.Was behind a BB.

Stock behind the seat gas tank with sending unit and float and fuel line from tank to below floor. Mounting hardware.

Standard bench seat - forrest green - good foam and vinyl.

3 row radiator for manual trans.

After market poly gas tank that fits between frame and body on drivers side in front of rear axle - fill tube comes out in rear wheel well.

Come get it!!!!!!!!!:::::::CB

camaro__thunder · 10-04-2005, 01:23 PM

Does the tank have a GM sender ? Would you ship for some $$ for your trouble and actual shipping costs ? THANKS

dave666693 · 10-04-2005, 01:58 PM

whwere exactly in Or.?

COBRO · 10-04-2005, 02:33 PM

Redmond - thats 20mi north of Bend.:::::CB

10-04-2005, 01:09 PM	#1
COBRO Active Member Join Date: Jan 2005 Location: RDM,Oregon Posts: 285	Free is a very good price Im tired of looking at this stuff and its taking up too much space.Have tried selling and nobody wants it so will see if anyone wants to come get it. You can come these parts and Im not shipping anything - located in Central Oregon - if nobody wants any of it then it will go to the dump. All came out of 72 C-20. SM 465 trans with bell housing,flywheel,clutch disk and pressure plate.Was behind a BB. Stock behind the seat gas tank with sending unit and float and fuel line from tank to below floor. Mounting hardware. Standard bench seat - forrest green - good foam and vinyl. 3 row radiator for manual trans. After market poly gas tank that fits between frame and body on drivers side in front of rear axle - fill tube comes out in rear wheel well. Come get it!!!!!!!!!:::::::CB

10-04-2005, 01:23 PM	#2
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Does the tank have a GM sender ? Would you ship for some $$ for your trouble and actual shipping costs ? THANKS __________________ My Project 69 SWB SHAVED BAGGED DOORED

10-04-2005, 01:58 PM	#3
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 901	whwere exactly in Or.?

10-04-2005, 02:33 PM	#4
COBRO Active Member Join Date: Jan 2005 Location: RDM,Oregon Posts: 285	Redmond - thats 20mi north of Bend.:::::CB



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.