selling all of my big block stuff - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CHEVYE · 10-05-2005, 08:02 AM

look who's winning the bid so far. does that name look familiar?

anyway, i have these 67-71 motor mounts, engine, and carb on the block. http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMESE%3AIT with gas the way it is, i'm gonna stick with the 358 i just built.

68haywagon · 10-05-2005, 11:06 AM

Quote:

Originally Posted by CHEVYE

look who's winning the bid so far. does that name look familiar?

We'll see if we can fix that little problem for you later on

Mike

RicksTrucks · 10-05-2005, 11:45 AM

It looks like they will be chromed soon.

Putter · 10-05-2005, 11:59 AM

Assuming you ship him what is pictured.....(reflecting to HIS methods of e-bay trading......'do unto others!!!')

MAKE FOR DANG CERTAIN THAT THE CHECK/MONEY ORDER CLEARS THE BANK FIRST!!!

*bisquik65* · 10-05-2005, 12:08 PM

You do know as a seller you can go on to the bid history page and zap his bid if tis going to be trouble? I have a few a had to do that to...Like a thunderbird sc supercharged 3.8 motor...I got a bid of 675 from the us,then it jumped to 1100 from austruaila...I cannot ship the motor that far...zap it!!!!

**StingRay** · 10-05-2005, 12:10 PM

You could have some fun with this

CHEVYE · 10-05-2005, 12:49 PM

Quote:

Originally Posted by StingRay

You could have some fun with this

that's what i was thinking

. i can't do that though. we'll see what happens.

CHEVYE · 10-05-2005, 12:59 PM

tell you what guys. anyone on the board that wins the auction, i'll wave the shipping costs. if the carb goes over $40 and a board member gets it, shipping is free to you too.

Joe67 · 10-05-2005, 01:14 PM

Does the 454 qualify for the free shipping

Nice setup. Was this purchased earlier this year from a board member? It looks like one that was. Just curious

CHEVYE · 10-05-2005, 01:33 PM

yeah, i got this one in MI from bigdaddycmu. i haven't done anything to it except pull the head and keep it lubed up good. i want to use it in my 71, but i'm about to part the whole truck out and buy one that is done and make a few personal changes (wheels etc.). i have no time to get anything done lately and i'm about to get into some rental property so time will get worse. pretty soon i'll have a ton of nice parts on here and most are new in the boxes so be looking.

Joe67 · 10-05-2005, 01:41 PM

Quote:

Originally Posted by CHEVYE

yeah, i got this one in MI from bigdaddycmu. i haven't done anything to it except pull the head and keep it lubed up good. i want to use it in my 71, but i'm about to part the whole truck out and buy one that is done and make a few personal changes (wheels etc.). i have no time to get anything done lately and i'm about to get into some rental property so time will get worse. pretty soon i'll have a ton of nice parts on here and most are new in the boxes so be looking.

I thought so.

I'll keep an eye out. My chassis is 95% complete, now to search for a nice powertrain and get started on the metal work

CHEVYE · 10-05-2005, 01:48 PM

i drive to MI quite often so if you see something big that i might be able to bring ya just PM me and i might be able to save you some time. i've got a killer small block and new trans i might get rid of soon if i buy a truck with a good set up already.

68haywagon · 10-05-2005, 03:22 PM

If I had the cash I would try to get the BB off you. I've decided thats what I want in my truck eventually. If the stands stay within reach of my wallet I'm going to bid on them (ebay name: skunk200).

Mike

LUV2XCLR8 · 10-05-2005, 04:47 PM

Hey Eric, sounds like your running out of storage space

CHEVYE · 10-05-2005, 05:31 PM

Quote:

Originally Posted by LUV2XCLR8

Hey Eric, sounds like your running out of storage space

what storage space

right now i've got an 11x24 garage in the basement

. we're gonna build an oversized 2 car garage on our other land and put a 830 sf. apartment over top of it. i'll be staying in it for about 3 years (just me and the missus so i don't need alot of living space). we're gonna rent this house out so we can get building on our new house alot sooner. this way we'll have 2 rentals + our own home all paid for by age 39

.

hey Craig, how many are planning to be at the cookout? you know i'll be there if i can make it. two more weeks man.

LUV2XCLR8 · 10-05-2005, 05:55 PM

Quote:

Originally Posted by CHEVYE

hey Craig, how many are planning to be at the cookout? you know i'll be there if i can make it. two more weeks man.

It's cancelled, check the Original first post

**GSFMECH** · 10-05-2005, 11:19 PM

I had a set of those stands I was selling on eBay a couple of months ago and he bid on mine also. After the biddng got up over about 60 bucks he gave up. I did sell him a set of hubcaps about 3 years ago and got my money OK. I ran into him at the Pate swap meet in Fort Worth in April and talked to him. Y'all be carefull with him.
Mike

70rs/ss · 10-06-2005, 01:29 PM

Quote:

Originally Posted by CHEVYE

look who's winning the bid so far. does that name look familiar?

anyway, i have these 67-71 motor mounts, engine, and carb on the block. http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMESE%3AIT with gas the way it is, i'm gonna stick with the 358 i just built.

I think somebody needs to put down that these frame mounts are only one piece of the puzzle. The actual rubber mount that goes with this has been discontinued and the only place I could find them was obsolete chevy for $175 a whack X's 2 for a total of $350!!!!! These frame mounts go for $50-75 a pair, I just wonder if anyone realizes what it takes to use them? I have used the clamshells from a 73 and up and they work fine and allow for headers to be used. Just wanted to add that bit of info in there, but not to keep anyone from buying them. I just want to educate if I can because that is a lot of money just for the factory look ($400ish)

Joe67 · 10-06-2005, 01:31 PM

Quote:

Originally Posted by CHEVYE

i drive to MI quite often so if you see something big that i might be able to bring ya just PM me and i might be able to save you some time. i've got a killer small block and new trans i might get rid of soon if i buy a truck with a good set up already.

Thanks. I will keep that in mind

I still have a BBC in mind, mounts and everything are already there, but if a nice LS2 setup comes around I may be swayed

flip66 · 10-06-2005, 02:24 PM

Quote:

Originally Posted by 70rs/ss

I think somebody needs to put down that these frame mounts are only one piece of the puzzle. The actual rubber mount that goes with this has been discontinued and the only place I could find them was obsolete chevy for $175 a whack X's 2 for a total of $350!!!!! These frame mounts go for $50-75 a pair, I just wonder if anyone realizes what it takes to use them? I have used the clamshells from a 73 and up and they work fine and allow for headers to be used. Just wanted to add that bit of info in there, but not to keep anyone from buying them. I just want to educate if I can because that is a lot of money just for the factory look ($400ish)

I got the rubber mounts that mount to the block at auto zone for 9.99 each

qksilver · 10-06-2005, 07:44 PM

What was the part number? I thought the 72 and later were better because of the design. Anti torque if I remember. A couple of companies also sell an aftermarket tubular style that uses the later style motor mounts.
Steve

CHEVYE · 10-06-2005, 08:57 PM

just added a nice carb i was gonna use. any board member that bids $125+ gets free shipping. http://cgi.ebay.com/ebaymotors/ws/eB...ALCA%3AUS%3A31

CHEVYE · 10-06-2005, 09:03 PM

hey Robb, here's the fuel pump from my drag car i was telling you about. if you still want it, just give me a holler.

**tnblazerk5** · 10-06-2005, 09:41 PM

Quote:

Originally Posted by CHEVYE

hey Robb, here's the fuel pump from my drag car i was telling you about. if you still want it, just give me a holler.

i will take it !!

pm sent

CHEVYE · 10-06-2005, 09:44 PM

another pic for Robb.

10-05-2005, 08:02 AM	#1
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	selling all of my big block stuff look who's winning the bid so far. does that name look familiar? anyway, i have these 67-71 motor mounts, engine, and carb on the block. http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMESE%3AIT with gas the way it is, i'm gonna stick with the 358 i just built. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

10-05-2005, 11:45 AM	#3
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	It looks like they will be chromed soon. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

10-05-2005, 11:59 AM	#4
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Assuming you ship him what is pictured.....(reflecting to HIS methods of e-bay trading......'do unto others!!!') MAKE FOR DANG CERTAIN THAT THE CHECK/MONEY ORDER CLEARS THE BANK FIRST!!! __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

10-05-2005, 12:10 PM	#6
StingRay Senior Member Join Date: Mar 2000 Location: Saskatoon,SK,Canada Posts: 2,476	You could have some fun with this __________________ Saskatoon, Saskatchewan Canada

10-05-2005, 12:59 PM	#8
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	tell you what guys. anyone on the board that wins the auction, i'll wave the shipping costs. if the carb goes over $40 and a board member gets it, shipping is free to you too. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

10-05-2005, 12:08 PM	#5
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	You do know as a seller you can go on to the bid history page and zap his bid if tis going to be trouble? I have a few a had to do that to...Like a thunderbird sc supercharged 3.8 motor...I got a bid of 675 from the us,then it jumped to 1100 from austruaila...I cannot ship the motor that far...zap it!!!!

10-05-2005, 01:14 PM	#9
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Does the 454 qualify for the free shipping Nice setup. Was this purchased earlier this year from a board member? It looks like one that was. Just curious __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

10-05-2005, 01:33 PM	#10
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	yeah, i got this one in MI from bigdaddycmu. i haven't done anything to it except pull the head and keep it lubed up good. i want to use it in my 71, but i'm about to part the whole truck out and buy one that is done and make a few personal changes (wheels etc.). i have no time to get anything done lately and i'm about to get into some rental property so time will get worse. pretty soon i'll have a ton of nice parts on here and most are new in the boxes so be looking. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

10-05-2005, 01:48 PM	#12
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	i drive to MI quite often so if you see something big that i might be able to bring ya just PM me and i might be able to save you some time. i've got a killer small block and new trans i might get rid of soon if i buy a truck with a good set up already. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

10-05-2005, 03:22 PM	#13
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	If I had the cash I would try to get the BB off you. I've decided thats what I want in my truck eventually. If the stands stay within reach of my wallet I'm going to bid on them (ebay name: skunk200). Mike __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

10-05-2005, 04:47 PM	#14
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Hey Eric, sounds like your running out of storage space __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-05-2005, 11:19 PM	#17
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	I had a set of those stands I was selling on eBay a couple of months ago and he bid on mine also. After the biddng got up over about 60 bucks he gave up. I did sell him a set of hubcaps about 3 years ago and got my money OK. I ran into him at the Pate swap meet in Fort Worth in April and talked to him. Y'all be carefull with him. Mike __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

10-06-2005, 07:44 PM	#21
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	What was the part number? I thought the 72 and later were better because of the design. Anti torque if I remember. A couple of companies also sell an aftermarket tubular style that uses the later style motor mounts. Steve

10-06-2005, 08:57 PM	#22
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	just added a nice carb i was gonna use. any board member that bids $125+ gets free shipping. http://cgi.ebay.com/ebaymotors/ws/eB...ALCA%3AUS%3A31 __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

10-06-2005, 09:03 PM	#23
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	hey Robb, here's the fuel pump from my drag car i was telling you about. if you still want it, just give me a holler. Attached Images __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback



Register or Log In To remove these advertisements.

10-06-2005, 09:44 PM	#25
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	another pic for Robb. Attached Images __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

Register or Log In To remove these advertisements.