My '69 GMC 1-ton at work......... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TP from Cntl PA · 10-07-2005, 02:47 PM

Been hauling wood like mad with the old girl. Haven't had a like of trouble with it so far this fall. Hopefully I'll have the box floor replated and painted blue to match the original truck color for next year

Thought about black, but I am not sure

**CPNE** · 10-07-2005, 03:08 PM

I think I'd go black

**Yukon Jack** · 10-07-2005, 04:30 PM

Quote:

Originally Posted by CPNE

I think I'd go black

Me too, that would look great.

Aquivarious · 10-07-2005, 04:42 PM

Definately black...

*72CSTC5* · 10-07-2005, 04:54 PM

Do not jinx yourself now!! Go black and finish off the two tone on the fenders with maybe the factory side lower trim if you can afford it. That would look nice.

smirch9 · 10-07-2005, 04:57 PM

Black would look cool, but I only have one remark. Where the he!! are the rockers?

LUV2XCLR8 · 10-07-2005, 05:12 PM

Quote:

Originally Posted by smirch9

Black would look cool, but I only have one remark. Where the he!! are the rockers?

and LMAO

TP from Cntl PA · 10-07-2005, 05:39 PM

Hides rust great huh

Actually, I fixed the door bottoms and rockers over the summer. Didn't want to shoot the whole truck since the original paint is decent still, so I just used the body line as a tape off point and shot that area on both sides black. I didn't do the area behind the bumper as a previous owner put a pickle in the passengers side fend in that spot. So I'd have had one nice side and the other a mess, so I didn't bother with it.

chevy_fatman · 10-07-2005, 09:08 PM

Looking good! I found its chevy twin

Aquivarious · 10-07-2005, 09:20 PM

Now that i look at it right, Looks like my last project... Mine was a chevy and its the wrong year... but kinda looks the same...

PanelDeland · 10-07-2005, 10:18 PM

You use it.Go black.Then you can touch it up easily.

68C15 · 10-07-2005, 10:31 PM

a guy i work with painted his 83ish K10 with this stuff that is like a mix between undercoating & spray-in bedliner. it came out real rugged & looked cool. just an idea. (it cost about $40-50)

1STtimePRo'71 · 10-08-2005, 12:17 AM

I'm partial to the BLACK scheme.

**Canadian694x4** · 10-08-2005, 12:33 AM

Go with the Black...love to see these old Trucks Workin'!

10-07-2005, 02:47 PM	#1
TP from Cntl PA Registered User Join Date: Apr 2003 Location: Central PA....In the Berg of Nisbet Posts: 790	My '69 GMC 1-ton at work......... Been hauling wood like mad with the old girl. Haven't had a like of trouble with it so far this fall. Hopefully I'll have the box floor replated and painted blue to match the original truck color for next year Thought about black, but I am not sure __________________ '72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!!

10-07-2005, 03:08 PM	#2
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	I think I'd go black __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

10-07-2005, 04:42 PM	#4
Aquivarious Registered User Join Date: Sep 2005 Location: Alton, Illinois Posts: 90	Definately black... __________________ '71 Chevy C-10 SWB (Project) '04 Mazda RX-8 (F*** around Car) '85 Chevy C-20 (Former Project) Currently Serving In IRAQ. (Man it sucks over here..)

10-07-2005, 04:57 PM	#6
smirch9 Registered User Join Date: Jan 2004 Location: Coweta, Oklahoma Posts: 2,389	Black would look cool, but I only have one remark. Where the he!! are the rockers? __________________ 1999 GMC 2500--Natural Gas Powered baby! 2007 Chevrolet Tahoe Have you subscribed? Click here. Order your site t-shirts and apparel here!

10-07-2005, 05:39 PM	#8
TP from Cntl PA Registered User Join Date: Apr 2003 Location: Central PA....In the Berg of Nisbet Posts: 790	Hides rust great huh Actually, I fixed the door bottoms and rockers over the summer. Didn't want to shoot the whole truck since the original paint is decent still, so I just used the body line as a tape off point and shot that area on both sides black. I didn't do the area behind the bumper as a previous owner put a pickle in the passengers side fend in that spot. So I'd have had one nice side and the other a mess, so I didn't bother with it. __________________ '72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!!

10-07-2005, 04:54 PM	#5
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	Do not jinx yourself now!! Go black and finish off the two tone on the fenders with maybe the factory side lower trim if you can afford it. That would look nice.

10-07-2005, 09:08 PM	#9
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	Looking good! I found its chevy twin __________________ Paul How do you make the invisible, visible?.........You take it away.

10-07-2005, 09:20 PM	#10
Aquivarious Registered User Join Date: Sep 2005 Location: Alton, Illinois Posts: 90	Now that i look at it right, Looks like my last project... Mine was a chevy and its the wrong year... but kinda looks the same... Attached Images __________________ '71 Chevy C-10 SWB (Project) '04 Mazda RX-8 (F*** around Car) '85 Chevy C-20 (Former Project) Currently Serving In IRAQ. (Man it sucks over here..)

10-07-2005, 10:18 PM	#11
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	You use it.Go black.Then you can touch it up easily. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

10-07-2005, 10:31 PM	#12
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	a guy i work with painted his 83ish K10 with this stuff that is like a mix between undercoating & spray-in bedliner. it came out real rugged & looked cool. just an idea. (it cost about $40-50) __________________ Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card

10-08-2005, 12:17 AM	#13
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	I'm partial to the BLACK scheme. __________________ -Cory 1967 2 Wheel Chevy

10-08-2005, 12:33 AM	#14
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,306	Go with the Black...love to see these old Trucks Workin'! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.