New Oak Bed Wood Sets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bad69bowtie · 10-08-2005, 07:32 PM

Hello folks. I manufacture show-quality bed wood sets for 1947-1987 Chevy/GMC trucks. I have several sets of 1973-1987 oak short stepside bed wood in stock at this time. Reasonablly priced at $225 for a limited time only. When available, I also offer inexpensive driver-quality bed wood sets for those who do need show-quality or want to spend alot on a new wood floor for their truck. These sets sell for $170 when available. I have only one set in stock now! I do accept Paypal. Please email for more info: Robert.Noe@xrxgsn.com

bad69bowtie · 10-18-2005, 07:33 AM

ttt

**AspecialZ** · 10-19-2005, 10:14 PM

Is the oak pieces sealed? and are the holes drilled for mounting?

powder2 · 10-19-2005, 11:46 PM

how bout long bed

bad69bowtie · 10-20-2005, 12:54 AM

I do not drill holes for several reasons. First, It is an added expense. Second, all truck beds do not set the same. Even yours might set different if you took it apart and put it back together again. Third, many customers now want a "clean" bed without the bolts showing. They bolt the bed crossmembers down underneath the wood. This bed sets come unfinished but I will stain or seal them for an extra charge. $35 to seal only and $50 to stain and seal. I do not have any long sets at this time, but I am building up my inventory and hope to soon. They will be $260 for show-quality and $200 for driver-quality when available. Thanks for your interest.

**AspecialZ** · 10-21-2005, 01:21 AM

how much would i have invested in shipping to 26070?

bad69bowtie · 10-21-2005, 02:28 PM

$42 shipped to 26070 using DHL Ground Service.

powder2 · 10-22-2005, 02:56 AM

what kind of wood do you use?

bad69bowtie · 10-22-2005, 03:51 PM

I stock red oak bed wood sets because that is what my truck restoration vendors want. I have to buy my wood in large quantities so I can provide oak at a reasonable price. I will do bed wood sets in most common or exotic woods, but this is usually an added expense due to the cost of the wood. I can provide oak bed wood sets about as cheap as pine.

75stepside · 10-30-2005, 08:59 PM

Quote:

Originally Posted by bad69bowtie

Reasonablly priced at $225 for a limited time only.

well guys, i gotta say, this is one sweet deal! when i did my bed floor, i spent a lot more than $225. Sure, i got my wood cheaper, but then i had to pay to have the grooves put in them, and the recessed/offset mounting holes, etc. The alternative, LMC or ChevyDuty, plan on putting out almost 2x!

a good deal and a great resource for our community!

**AspecialZ** · 10-30-2005, 10:26 PM

alright 75...you're 1 hell of a salesman, I'll take a set for my 74 stepside.

send me some payment info.

75stepside · 10-31-2005, 09:12 AM

Quote:

Originally Posted by AspecialZ

alright 75...you're 1 hell of a salesman...

do i get commission!

BTW - how's your project comin' ?

bad69bowtie · 10-31-2005, 09:49 AM

$225 plus $42 shipping to 26070 via DHL Ground Service. I can do Paypal or money orders. Just let me know which you prefer. Thanks!

Thanks 75stepside! I am going to give you one hell of a deal when you need a bed wood set next time!

**AspecialZ** · 10-31-2005, 11:57 PM

badbowtie, send me a paypal addy and i'll get ya covered. Hey 75., it's coming, got a cab corner on tonight, one more to go. By the way, when your not looking your going to lose those bed caps

bad69bowtie · 11-01-2005, 01:09 PM

Robert.Noe@xrxgsn.com. Thanks for your purchase!

re1 · 11-01-2005, 01:27 PM

can you explain the difference between show quality and driver or maybe a picture of the two,
I'm looking to do my 72 long fleetside.

bad69bowtie · 11-01-2005, 08:54 PM

Driver-quality sets are put together using some boards that I feel have minor flaws such as consistency of color, unusual grain patterns, light or dark streaks, or small knots usually no bigger than 1/8-1/4". Some of the boards in these sets may not have any significant flaws. These sets will look great if stained or tinted to blend color. These sets are very limited and often unavailable because I am very picky about the quality of wood that I buy and alot of these flaws are cut off before the boards are run through the moulding machine. A show-quality set is put together using my finest quality boards and color-matched for consistency of color and grain patterns across the whole set. Please email me Robert.Noe@xrxgsn.com and I will send you some pics. Thanks!

**AspecialZ** · 11-03-2005, 12:33 AM

Payment sent! thanks again

bad69bowtie · 11-03-2005, 10:13 PM

Your bed wood set is on the way to you. Thanks!

10-08-2005, 07:32 PM	#1
bad69bowtie Active Member Join Date: Apr 2004 Location: Kingsport, TN Posts: 134	New Oak Bed Wood Sets Hello folks. I manufacture show-quality bed wood sets for 1947-1987 Chevy/GMC trucks. I have several sets of 1973-1987 oak short stepside bed wood in stock at this time. Reasonablly priced at $225 for a limited time only. When available, I also offer inexpensive driver-quality bed wood sets for those who do need show-quality or want to spend alot on a new wood floor for their truck. These sets sell for $170 when available. I have only one set in stock now! I do accept Paypal. Please email for more info: Robert.Noe@xrxgsn.com Last edited by bad69bowtie; 10-18-2005 at 07:31 AM. Reason: Adding info.

10-18-2005, 07:33 AM	#2
bad69bowtie Active Member Join Date: Apr 2004 Location: Kingsport, TN Posts: 134	Re: New Oak Bed Wood Sets ttt

10-19-2005, 10:14 PM	#3
AspecialZ Street Rod Restoration Join Date: Jan 2004 Location: Wellsburg, WV Posts: 882	Re: New Oak Bed Wood Sets Is the oak pieces sealed? and are the holes drilled for mounting? __________________ Follow me on Instagram @ hot_rod_shop

10-19-2005, 11:46 PM	#4
powder2 Registered User Join Date: Oct 2003 Location: Abilene Texas Posts: 287	Re: New Oak Bed Wood Sets how bout long bed

10-20-2005, 12:54 AM	#5
bad69bowtie Active Member Join Date: Apr 2004 Location: Kingsport, TN Posts: 134	Re: New Oak Bed Wood Sets I do not drill holes for several reasons. First, It is an added expense. Second, all truck beds do not set the same. Even yours might set different if you took it apart and put it back together again. Third, many customers now want a "clean" bed without the bolts showing. They bolt the bed crossmembers down underneath the wood. This bed sets come unfinished but I will stain or seal them for an extra charge. $35 to seal only and $50 to stain and seal. I do not have any long sets at this time, but I am building up my inventory and hope to soon. They will be $260 for show-quality and $200 for driver-quality when available. Thanks for your interest.

10-21-2005, 01:21 AM	#6
AspecialZ Street Rod Restoration Join Date: Jan 2004 Location: Wellsburg, WV Posts: 882	Re: New Oak Bed Wood Sets how much would i have invested in shipping to 26070? __________________ Follow me on Instagram @ hot_rod_shop

10-21-2005, 02:28 PM	#7
bad69bowtie Active Member Join Date: Apr 2004 Location: Kingsport, TN Posts: 134	Re: New Oak Bed Wood Sets $42 shipped to 26070 using DHL Ground Service.

10-22-2005, 02:56 AM	#8
powder2 Registered User Join Date: Oct 2003 Location: Abilene Texas Posts: 287	Re: New Oak Bed Wood Sets what kind of wood do you use?

10-22-2005, 03:51 PM	#9
bad69bowtie Active Member Join Date: Apr 2004 Location: Kingsport, TN Posts: 134	Re: New Oak Bed Wood Sets I stock red oak bed wood sets because that is what my truck restoration vendors want. I have to buy my wood in large quantities so I can provide oak at a reasonable price. I will do bed wood sets in most common or exotic woods, but this is usually an added expense due to the cost of the wood. I can provide oak bed wood sets about as cheap as pine.

10-30-2005, 10:26 PM	#11
AspecialZ Street Rod Restoration Join Date: Jan 2004 Location: Wellsburg, WV Posts: 882	Re: New Oak Bed Wood Sets alright 75...you're 1 hell of a salesman, I'll take a set for my 74 stepside. send me some payment info. __________________ Follow me on Instagram @ hot_rod_shop

10-31-2005, 09:49 AM	#13
bad69bowtie Active Member Join Date: Apr 2004 Location: Kingsport, TN Posts: 134	Re: New Oak Bed Wood Sets $225 plus $42 shipping to 26070 via DHL Ground Service. I can do Paypal or money orders. Just let me know which you prefer. Thanks! Thanks 75stepside! I am going to give you one hell of a deal when you need a bed wood set next time!

10-31-2005, 11:57 PM	#14
AspecialZ Street Rod Restoration Join Date: Jan 2004 Location: Wellsburg, WV Posts: 882	Re: New Oak Bed Wood Sets badbowtie, send me a paypal addy and i'll get ya covered. Hey 75., it's coming, got a cab corner on tonight, one more to go. By the way, when your not looking your going to lose those bed caps Attached Images __________________ Follow me on Instagram @ hot_rod_shop

11-01-2005, 01:09 PM	#15
bad69bowtie Active Member Join Date: Apr 2004 Location: Kingsport, TN Posts: 134	Re: New Oak Bed Wood Sets Robert.Noe@xrxgsn.com. Thanks for your purchase!

11-01-2005, 01:27 PM	#16
re1 Registered User Join Date: Oct 2005 Location: Metro Vancouver Posts: 444	Re: New Oak Bed Wood Sets can you explain the difference between show quality and driver or maybe a picture of the two, I'm looking to do my 72 long fleetside.

11-01-2005, 08:54 PM	#17
bad69bowtie Active Member Join Date: Apr 2004 Location: Kingsport, TN Posts: 134	Re: New Oak Bed Wood Sets Driver-quality sets are put together using some boards that I feel have minor flaws such as consistency of color, unusual grain patterns, light or dark streaks, or small knots usually no bigger than 1/8-1/4". Some of the boards in these sets may not have any significant flaws. These sets will look great if stained or tinted to blend color. These sets are very limited and often unavailable because I am very picky about the quality of wood that I buy and alot of these flaws are cut off before the boards are run through the moulding machine. A show-quality set is put together using my finest quality boards and color-matched for consistency of color and grain patterns across the whole set. Please email me Robert.Noe@xrxgsn.com and I will send you some pics. Thanks!



Register or Log In To remove these advertisements.

11-03-2005, 12:33 AM	#18
AspecialZ Street Rod Restoration Join Date: Jan 2004 Location: Wellsburg, WV Posts: 882	Re: New Oak Bed Wood Sets Payment sent! thanks again __________________ Follow me on Instagram @ hot_rod_shop

11-03-2005, 10:13 PM	#19
bad69bowtie Active Member Join Date: Apr 2004 Location: Kingsport, TN Posts: 134	Re: New Oak Bed Wood Sets Your bed wood set is on the way to you. Thanks!

Register or Log In To remove these advertisements.