Anyone have a Crew Cab? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1967k30 · 10-08-2005, 09:36 PM

I wondering how many are out there.Any 4x4's? I'd like to build one now that my 67' is almost finished.Need another project

.

1967k30 · 10-09-2005, 01:33 PM

Surely someone has one or some pic's?

stllookn · 10-09-2005, 01:41 PM

There are a couple of crew cab trucks on the board...try a PM to boardmenber "crews"!

PanelDeland · 10-09-2005, 01:47 PM

The 67-72 crew cab pick-ups were all aftermarket conversions.There are some out there but most have been ab(USED).They have an unusual looking wedge between the doors.They also have 4 doors which means 4 rust mite nests,and the usual rust problems.I would suggest sear4ching your local trader mags and online sources.I had some pics of one but have deleted them since they were taken for a BB member who was looking at one.It was rusted the bottoms of the doors,rockers,cab corners,bedsides,floors,drip rail,and the usual rusted out fenderwell.In addition it had pieces of a early 90's interior,side steps,tinted windows,and rats nest wiring.The seller wanted around $4500.00.Which would have been a (crack)pipe dream.Good luck on finding one and make sure you are very good friends with a master body man since you probably wont find one in very good shape and a lot of the extension stuff was handbuilt truck by truck.
Or you could build your own.

onetoncrewcab · 10-09-2005, 01:53 PM

My suggestion would be to buy a Suburban and hack the back end off. Add the back section from a cab and the box and viola...a crewcab. Mostly. It would only have three doors instead of four. I would only do this if you are handy with bodywork and welding panels. It gets too expensive to hire this stuff out. Unless you are rolling in money and can afford to hire it out. No offense to anyone that owns one, but I do not care for the ones that have the triangle wedge between the two doors.
Mike

1967k30 · 10-09-2005, 02:15 PM

I have seen pic's of one that didn't have 4 front doors.It may have only had 3.Wasn't there some with doors like a sub? The only one I saw in person was a 2 door and it was sitting along the road rotting.I should have stopped amd located the owner and tryed to acquire it.I still would but it's 500 miles away.

Longhorn Man · 10-09-2005, 02:32 PM

look on my site, I have a page on these along with a pink GMC too.

**kwmech** · 10-09-2005, 09:25 PM

Quote:

Originally Posted by 1TonCrewCab

My suggestion would be to buy a Suburban and hack the back end off. Add the back section from a cab and the box and viola...a crewcab. Mostly. It would only have three doors instead of four. I would only do this if you are handy with bodywork and welding panels. It gets too expensive to hire this stuff out. Unless you are rolling in money and can afford to hire it out. No offense to anyone that owns one, but I do not care for the ones that have the triangle wedge between the two doors.
Mike

That is exactly what I did, and also a 4x conversion, I'm thinking of selling it, still needs to be completed.

396 SS · 10-09-2005, 09:41 PM

I have the parts gathered up to biuld a 4dr crew cab. I will be starting on it in a couple of months hopefully. I am wanting mine to look something like this.

Longhorn Man · 10-09-2005, 09:51 PM

nice photo shop job on the color.

1967k30 · 10-09-2005, 10:04 PM

Are there factory ones like the one pictured above? With 2 smaller doors? Longhornman: I looked at yours and really like the bottom one.

chevy_fatman · 10-09-2005, 10:19 PM

Quote:

Originally Posted by Longhorn Man

nice photo shop job on the color.

I was gonna say the exact same thing when I saw that pic.

LUV2XCLR8 · 10-09-2005, 10:21 PM

Quote:

Originally Posted by Longhorn Man

nice photo shop job on the color.

Agreed, looks wicked

Longhorn Man · 10-09-2005, 10:26 PM

Quote:

Originally Posted by 1967k30

Are there factory ones like the one pictured above? With 2 smaller doors? Longhornman: I looked at yours and really like the bottom one.

No, there were no factory ones like that, this was a custom job. (owner modified)

The last one on my page there is actually owned by a member...AlaskanMan

Haven't seen him on here much, but his profile says he was here last month.

**kwmech** · 10-09-2005, 11:45 PM

This is mine ---

extd56 · 10-10-2005, 12:11 AM

Here is a link to the truck that I am building, it was a 67 GMc with a V-6 and a 4 speed manual but it will be reborn with a fuel injected big block chevy with a 4L80E trans and sporting a 67 Chevy smile with 2002 Chevy seats.

http://67-72chevytrucks.com/vboard/s...2&page=1&pp=20

1967k30 · 10-10-2005, 02:28 PM

Keep em coming.Thanks

1969 C/K CST · 10-10-2005, 03:52 PM

Dang I like this thing.

onetoncrewcab · 10-10-2005, 06:33 PM

Quote:

Originally Posted by 1969 C/K CST

Dang I like this thing.

*FUNMUDDER* · 10-10-2005, 07:36 PM

Photoshop looks like a real truck.

Now just slam it with a 8 inch lift and 38 swampers, along with a NV5600 and a 383 stroker, and you got the ultimate mudding truck for you and your buddies.

northerngmc · 10-10-2005, 10:28 PM

The photoshop is just the colour, the truck is real. Real expensive!

toomanytoyz · 04-09-2008, 09:01 AM

ttt

How did this Project turn out?????

Rick

HoupPhotography · 04-09-2008, 10:48 AM

Wow! Those crew cabs look awesome!

1967k30 · 05-08-2008, 03:26 AM

If you're talking to me it never happened. Sled Pulling Diesels has taken priority.

Quote:

Originally Posted by toomanytoyz

ttt

How did this Project turn out?????

Rick

10-08-2005, 09:36 PM	#1
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Anyone have a Crew Cab? I wondering how many are out there.Any 4x4's? I'd like to build one now that my 67' is almost finished.Need another project . __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

10-09-2005, 01:33 PM	#2
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Surely someone has one or some pic's? __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

10-09-2005, 01:41 PM	#3
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	There are a couple of crew cab trucks on the board...try a PM to boardmenber "crews"! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

10-09-2005, 01:47 PM	#4
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	The 67-72 crew cab pick-ups were all aftermarket conversions.There are some out there but most have been ab(USED).They have an unusual looking wedge between the doors.They also have 4 doors which means 4 rust mite nests,and the usual rust problems.I would suggest sear4ching your local trader mags and online sources.I had some pics of one but have deleted them since they were taken for a BB member who was looking at one.It was rusted the bottoms of the doors,rockers,cab corners,bedsides,floors,drip rail,and the usual rusted out fenderwell.In addition it had pieces of a early 90's interior,side steps,tinted windows,and rats nest wiring.The seller wanted around $4500.00.Which would have been a (crack)pipe dream.Good luck on finding one and make sure you are very good friends with a master body man since you probably wont find one in very good shape and a lot of the extension stuff was handbuilt truck by truck. Or you could build your own. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

10-09-2005, 01:53 PM	#5
onetoncrewcab One of my kids. Cute eh? Join Date: Oct 2001 Location: Mitchell, SD Posts: 1,286	My suggestion would be to buy a Suburban and hack the back end off. Add the back section from a cab and the box and viola...a crewcab. Mostly. It would only have three doors instead of four. I would only do this if you are handy with bodywork and welding panels. It gets too expensive to hire this stuff out. Unless you are rolling in money and can afford to hire it out. No offense to anyone that owns one, but I do not care for the ones that have the triangle wedge between the two doors. Mike __________________ If a kid asks where rain comes from, I think a cute thing to tell him is “God is crying.” And if he asks why God is crying, another cute thing to tell him is “Probably because of something you did. John 3:16 2006 Chevy HHR 2000 Dodge Durango 1985 Jeep CJ-7 1970 Chevy Pickup

10-09-2005, 02:15 PM	#6
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	I have seen pic's of one that didn't have 4 front doors.It may have only had 3.Wasn't there some with doors like a sub? The only one I saw in person was a 2 door and it was sitting along the road rotting.I should have stopped amd located the owner and tryed to acquire it.I still would but it's 500 miles away. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

10-09-2005, 02:32 PM	#7
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	look on my site, I have a page on these along with a pink GMC too.

10-09-2005, 09:41 PM	#9
396 SS Registered User Join Date: Feb 2005 Location: Cameron, Ok. Posts: 112	I have the parts gathered up to biuld a 4dr crew cab. I will be starting on it in a couple of months hopefully. I am wanting mine to look something like this. Attached Images Last edited by 396 SS; 10-09-2005 at 09:44 PM.

10-09-2005, 09:51 PM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	nice photo shop job on the color.

10-09-2005, 10:04 PM	#11
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Are there factory ones like the one pictured above? With 2 smaller doors? Longhornman: I looked at yours and really like the bottom one. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

10-09-2005, 11:45 PM	#15
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,630	This is mine --- Attached Images

10-10-2005, 12:11 AM	#16
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Here is a link to the truck that I am building, it was a 67 GMc with a V-6 and a 4 speed manual but it will be reborn with a fuel injected big block chevy with a 4L80E trans and sporting a 67 Chevy smile with 2002 Chevy seats. http://67-72chevytrucks.com/vboard/s...2&page=1&pp=20

10-10-2005, 02:28 PM	#17
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Keep em coming.Thanks __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

10-10-2005, 03:52 PM	#18
1969 C/K CST A.K.A- Crummy Join Date: Jun 2005 Location: NC foothills Posts: 3,025	Dang I like this thing. Attached Images __________________ 2003 Silverado Z71 Are fishermen all liars?

10-10-2005, 07:36 PM	#20
FUNMUDDER Account Suspended Join Date: Jun 2005 Location: Maine Posts: 427	Photoshop looks like a real truck. Now just slam it with a 8 inch lift and 38 swampers, along with a NV5600 and a 383 stroker, and you got the ultimate mudding truck for you and your buddies.



Register or Log In To remove these advertisements.

10-10-2005, 10:28 PM	#21
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	The photoshop is just the colour, the truck is real. Real expensive! __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

04-09-2008, 09:01 AM	#22
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: Anyone have a Crew Cab? ttt How did this Project turn out????? Rick __________________ 55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde

04-09-2008, 10:48 AM	#23
HoupPhotography Registered User Join Date: Feb 2008 Location: Phoenix, Az Posts: 1,204	Re: Anyone have a Crew Cab? Wow! Those crew cabs look awesome! __________________ R.I.P. Scott Kalitta

Register or Log In To remove these advertisements.