Check out my new exhaust - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dion · 10-09-2005, 11:58 AM

my headers were shot so I bought some headmans off ebay, great deal on them too.

the pipes didn't line up so I had them cut and weld them together. I also had them remove the tail pipes and put on turn downs.

she sounds mean!

matthufham · 10-09-2005, 12:30 PM

nice

Joe67 · 10-09-2005, 01:02 PM

Looks good.

You don't have any issues with those plug wires being so close to the headers? Or does it just look that way in the pics?

dion · 10-09-2005, 01:10 PM

Quote:

Originally Posted by 67c10step

Looks good.

You don't have any issues with those plug wires being so close to the headers? Or does it just look that way in the pics?

only with one but I have a boot on it. later today I'm going to spend some time on her and clean up the entire engine compartment, get the wires tight and clean etc..

I have noticed some vibration in the bed now with this new set up so I'm going back to the muffler shop to see if they do something about it.

djracer · 10-09-2005, 03:36 PM

no collector gasket leaks!

76bonanza · 10-09-2005, 06:29 PM

does it rub the frame on the passenger side?

Aquivarious · 10-09-2005, 06:37 PM

Looks like it was tight, but still looks great!

**special-K** · 10-09-2005, 09:56 PM

Torque-Steps,alright.

10-09-2005, 11:58 AM	#1
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	Check out my new exhaust my headers were shot so I bought some headmans off ebay, great deal on them too. the pipes didn't line up so I had them cut and weld them together. I also had them remove the tail pipes and put on turn downs. she sounds mean! Attached Images __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

10-09-2005, 01:02 PM	#3
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Looks good. You don't have any issues with those plug wires being so close to the headers? Or does it just look that way in the pics? __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

10-09-2005, 03:36 PM	#5
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	no collector gasket leaks! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-09-2005, 06:29 PM	#6
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	does it rub the frame on the passenger side? __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

10-09-2005, 06:37 PM	#7
Aquivarious Registered User Join Date: Sep 2005 Location: Alton, Illinois Posts: 90	Looks like it was tight, but still looks great! __________________ '71 Chevy C-10 SWB (Project) '04 Mazda RX-8 (F*** around Car) '85 Chevy C-20 (Former Project) Currently Serving In IRAQ. (Man it sucks over here..)

10-09-2005, 12:30 PM	#2
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	nice

10-09-2005, 09:56 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Torque-Steps,alright. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.