![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
chevy truck fan
Join Date: Mar 2005
Location: Gilbert, arizona 85298
Posts: 1,990
|
Cab Mounting Questions
all,
i am now in the process of mounting my cab back to the frame. ![]() ![]() ![]() thanks!!! ![]() |
![]() |
![]() |
![]() |
#2 |
Old Skool Club
![]() Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
No instructions?? Give 'em a call, or go on-line and see what they have to say. Check LMC...their catalogs have a pretty good set of line drawings that are good for reference. Should be a bolt and washer to go through the floor pan, through the cushion and into the mount, with a washer beneath the nut and then the nut. This is a guess, based on what I see in my truck.
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
![]() |
![]() |
![]() |
#3 |
chevy truck fan
Join Date: Mar 2005
Location: Gilbert, arizona 85298
Posts: 1,990
|
chevloray,
thanks for the input. i have tried to look at the assy. manual & the lmc cat. i still for some reason am not able to feel 100% about the setup.there are "instructions" they are pretty vague, - real general. thanks though. |
![]() |
![]() |
![]() |
#4 |
chevy truck fan
Join Date: Mar 2005
Location: Gilbert, arizona 85298
Posts: 1,990
|
all,
i was really hoping that someone who has recently done this could maybe give me a few pointers & i was was really wanting to see a closeup pick of the mounts installed on a fresh rebuild. maybe one of each circumstance (1-rear cab & 1-front floor board) thanks again for any input!!! rodstored-72 |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Aug 2005
Location: Port Townsend, Wa
Posts: 43
|
is this a long bed or short bed, they are different. I am no expert here but have taken off and set a few cabs before. Is you cab loaded(doors,interior, windows) or is it empty now.
To lift mine cab around by myself, I use my engine hoist with some soft straps through either open front and rear windows or sides with no doors. I currently have my cab just sitting on the frame with new cab mounts just resting under it. Sorry no pics yet, cant get them to load here. ![]() Hope that helps a little. |
![]() |
![]() |
![]() |
#6 |
chevy truck fan
Join Date: Mar 2005
Location: Gilbert, arizona 85298
Posts: 1,990
|
71 chevystepside,
it is a swb truck 2wd. i have the bushings , but really just need the order in which all the bushings (mounts) go in relation to the frame & the cab. i appreciate if you would be able to take a pic. i think the best would be a pic of each location then i could just copy the order i see. thanks again everyone! rodstored-72 |
![]() |
![]() |
![]() |
Bookmarks |
|
|