Almost current pic.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

b454rat · 10-12-2005, 08:25 PM

Somewhere on here I said that I was gonna post a pic of my 89 with the SAS. Used ORU's kit (never again, and gonna sell it), junkyard 4" front springs, OBS rear spring front hangers, homemade shackle flip using the stock rear spring front hanger and a Belltech shackle, stock 3/4 ton springs. GM Dana 60 front, crossover steering (have to on these trucks doing a SAS), 14b full floater rear. Both have very nice for the street 3:73s gears. It still has more than enough oomph to go wheeling in high range. I have a Detroit for it, just have to get off my a$$ and put it in. In this pic it has 35" Baja Claws, but now it has 36" Swamper SXs on stock 16.5x8.25s (Need another one if anybody has one!!!!). TBI 454, 2wd TH400, div. 205 out of a Dodge, 1350 on all six u-joints. Shocks are Monroe something er other, only $22 each at Autozone. Doesn't ride too bad, but still need to fix the shock mounts on the axle in front, angle is wrong. Hook up the t-case linkage, and the biggy (besides state inspection due tomorrow) is a VSS. No speedo, and no timing advance. Truck will run so much better with it hooked up. Best part is I initially bought the truck for $500.

charlieo · 10-12-2005, 09:03 PM

Dang ! Now thats what I'm talking about !! Man I love that truck.

b454rat · 10-14-2005, 04:46 PM

Gonna try to get some more pics this weekend......

10-12-2005, 08:25 PM	#1
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,454	Almost current pic.... Somewhere on here I said that I was gonna post a pic of my 89 with the SAS. Used ORU's kit (never again, and gonna sell it), junkyard 4" front springs, OBS rear spring front hangers, homemade shackle flip using the stock rear spring front hanger and a Belltech shackle, stock 3/4 ton springs. GM Dana 60 front, crossover steering (have to on these trucks doing a SAS), 14b full floater rear. Both have very nice for the street 3:73s gears. It still has more than enough oomph to go wheeling in high range. I have a Detroit for it, just have to get off my a$$ and put it in. In this pic it has 35" Baja Claws, but now it has 36" Swamper SXs on stock 16.5x8.25s (Need another one if anybody has one!!!!). TBI 454, 2wd TH400, div. 205 out of a Dodge, 1350 on all six u-joints. Shocks are Monroe something er other, only $22 each at Autozone. Doesn't ride too bad, but still need to fix the shock mounts on the axle in front, angle is wrong. Hook up the t-case linkage, and the biggy (besides state inspection due tomorrow) is a VSS. No speedo, and no timing advance. Truck will run so much better with it hooked up. Best part is I initially bought the truck for $500. __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 6” lift 1999 GMC Yukon 350/4L60 4" SAS Last edited by b454rat; 10-12-2005 at 08:26 PM.

10-14-2005, 04:46 PM	#3
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,454	Gonna try to get some more pics this weekend...... __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 6” lift 1999 GMC Yukon 350/4L60 4" SAS

10-12-2005, 09:03 PM	#2
charlieo Registered User Join Date: Feb 2003 Location: sw Posts: 341	Dang ! Now thats what I'm talking about !! Man I love that truck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.