Matching 3/4 ton 4X4 Front & Rear 410 Running Gear - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Classic Heartbeat** · 10-14-2005, 01:27 PM

I have a set of 1972 3/4 ton 4X4 running gear with corperate rear. Factory possi on the rear and 4.10 gears. $450.00 buys the set. Good running gear, but I am changing out to a Dana 60 front and Dana 70 rear with 3.07 gears for project "Muscle Truck". WES www.ClassicHeartbeat.com

**71blksuper4x4** · 10-14-2005, 01:44 PM

Don't mean to get off subject Wes.... but what is project MUSCLE TRUCK??? I like the sounds of it so far being 4x4 and all... . . . . ttt for ya

**Classic Heartbeat** · 10-14-2005, 02:47 PM

I like to give names to my projects. Project "Muscle Truck" is being named that because I will be using it to pull my 24' enclosed trailer to the swap meets. It is a 72 Cheyenne K-20 with A/C that I am installing a dana 60 front, dana 70 rear, t-400/205 tranny/transfer case, 402 big block and electric fans. The truck will have most of the options that were availible for these trucks, like A/C, shoulder harness seat belts, bucket seats, tach/vac dash, tilt column, duel batteries, duel gas tanks, and etc. It will be kind of like the "Garden Truck" on steroids..

WES www.ClassicHeartbeat.com

stllookn · 10-14-2005, 03:45 PM

americanrider is looking for a matched set for his 4x4 project. He is in Spanaway...Elk Plain, WA.

Wes...steroids and 402 don't compute...572 and steroids...now you are talking! I can see you don't have enough parts in your trailer...LOL!

stllookn · 10-14-2005, 03:54 PM

Then again...how about this Schubeck 904 cubic inch monster? Now that will yank your trailer and your bank account all at one time!

**Classic Heartbeat** · 10-14-2005, 04:46 PM

Although I must agree that those motors are powerfull... They are also not so easy on the wallet..lol Unless you know someone who wants to trade for the running gear..lol WES

Americanrider · 10-14-2005, 05:35 PM

I have already found the D-60 posi rear I need, just haven't picked it up yet. I have a 4.09 3/4ton 44 disk front from a 72 and another from a 75 but was looking for a true 4.10 Dana 44... I like to have an exact match, I'm funny that way. Is your 72 front a 4.09 or 4.10 and would you consider selling just the front?

**Classic Heartbeat** · 10-14-2005, 05:44 PM

Without pulling the covers I am not sure. They are the stock gears from the factory. I don't want to split the pair though. WES www.ClassicHeartbeat.com

**Classic Heartbeat** · 10-16-2005, 07:14 PM

topping this one out..

MeannGrumpy · 10-29-2005, 11:35 PM

Greetings Wess; Are your axles complete with brakes, and other parts. Maby a proportioning valve and steering arm

Rod · 10-31-2005, 10:18 PM

They would be 4.09 up front I suspect.

67-72williso · 10-31-2005, 10:46 PM

The Muscle Truck must have a Dodge Dana 61 front to be 3.07 gears and the Dana 70 Dodge used with it. The lowest gear for a dana 60 is 3.33 used in Fords. On the project I`m working on I`m useing Dana 61 front (Dodge) and Dana 61 rear (Ford) with 3.00 gears. Are you using the Chevy front sway bar on the project, 73-up?
Later Willis

CG · 11-01-2005, 12:33 AM

wes i dont know where i am in line for this stuff but if it hasnt been taken let me know....thanks

MeannGrumpy · 11-01-2005, 10:09 AM

Wess if those axles are complete or near complete I will also take them Also being in line somewhere

**Classic Heartbeat** · 11-01-2005, 04:19 PM

Wow, I thought that this post had gone by the wayside. The axles that I am using under "Muscle Truck" are 1990 Dodge axles out of a Deisel. I am having to modify the spring mounts on the frame to use them.
The axles that I had for sale are gone now. One of the board members bought them a weak ago and came down to pick them up. I will have another set though if I buy a 78 3/4 ton Suburban that has the t-400 / 205 transfer case that I need. The rear spring perches would have to be moved though to bolt under a 67-72. Any interest there? I would also have a good running 454 for sale also. I would be willing to sell out the whole Burb without tranny and transfer case also pretty reasonible. Just exploring my avenues for now. WES

CG · 11-01-2005, 10:19 PM

how much for the axels wes? do you know the ratio yet? i dont have a use for anything else off the burb...thanks

**Classic Heartbeat** · 11-02-2005, 04:21 PM

The guy tells me that he thinks that they are 4.10 but is unsure. He says that it winds up pretty tight going down the freeway, so my guess is that he is probably right. WES

CG · 11-03-2005, 08:57 PM

price?

**Classic Heartbeat** · 11-04-2005, 04:13 PM

I haven't bought the burb yet. I am awaiting pictures and etc. Price will depend on condition. If they are in good shape probably $450.00 for the set. WES www.ClassicHeartbeat.com

CG · 11-05-2005, 01:27 PM

thanks for the quote wes. thats more than i want to spend and still have to modify.

mark

10-14-2005, 01:27 PM	#1
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Matching 3/4 ton 4X4 Front & Rear 410 Running Gear I have a set of 1972 3/4 ton 4X4 running gear with corperate rear. Factory possi on the rear and 4.10 gears. $450.00 buys the set. Good running gear, but I am changing out to a Dana 60 front and Dana 70 rear with 3.07 gears for project "Muscle Truck". WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

10-14-2005, 01:44 PM	#2
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Don't mean to get off subject Wes.... but what is project MUSCLE TRUCK??? I like the sounds of it so far being 4x4 and all... . . . . ttt for ya __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

10-14-2005, 02:47 PM	#3
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	I like to give names to my projects. Project "Muscle Truck" is being named that because I will be using it to pull my 24' enclosed trailer to the swap meets. It is a 72 Cheyenne K-20 with A/C that I am installing a dana 60 front, dana 70 rear, t-400/205 tranny/transfer case, 402 big block and electric fans. The truck will have most of the options that were availible for these trucks, like A/C, shoulder harness seat belts, bucket seats, tach/vac dash, tilt column, duel batteries, duel gas tanks, and etc. It will be kind of like the "Garden Truck" on steroids.. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

10-14-2005, 03:45 PM	#4
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	americanrider is looking for a matched set for his 4x4 project. He is in Spanaway...Elk Plain, WA. Wes...steroids and 402 don't compute...572 and steroids...now you are talking! I can see you don't have enough parts in your trailer...LOL! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 10-14-2005 at 03:48 PM.

10-14-2005, 03:54 PM	#5
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Then again...how about this Schubeck 904 cubic inch monster? Now that will yank your trailer and your bank account all at one time! Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

10-14-2005, 04:46 PM	#6
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Although I must agree that those motors are powerfull... They are also not so easy on the wallet..lol Unless you know someone who wants to trade for the running gear..lol WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

10-14-2005, 05:35 PM	#7
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	I have already found the D-60 posi rear I need, just haven't picked it up yet. I have a 4.09 3/4ton 44 disk front from a 72 and another from a 75 but was looking for a true 4.10 Dana 44... I like to have an exact match, I'm funny that way. Is your 72 front a 4.09 or 4.10 and would you consider selling just the front?

10-14-2005, 05:44 PM	#8
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Without pulling the covers I am not sure. They are the stock gears from the factory. I don't want to split the pair though. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

10-16-2005, 07:14 PM	#9
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: Matching 3/4 ton 4X4 Front & Rear 410 Running Gear topping this one out.. __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

10-29-2005, 11:35 PM	#10
MeannGrumpy Registered User Join Date: Jan 2003 Location: Medicine Hat, Alberta,Canada Posts: 64	Re: Matching 3/4 ton 4X4 Front & Rear 410 Running Gear Greetings Wess; Are your axles complete with brakes, and other parts. Maby a proportioning valve and steering arm __________________ 1970 Longhorn, factory air & Cruise,Tach vac 1970 C 20 3/4 4x4 350 with turbo 350 auto,

10-31-2005, 10:18 PM	#11
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Re: Matching 3/4 ton 4X4 Front & Rear 410 Running Gear They would be 4.09 up front I suspect.

10-31-2005, 10:46 PM	#12
67-72williso Junk/Daily Driver Club Join Date: Feb 2004 Location: Manheim, PA 17545 Posts: 253	Re: Matching 3/4 ton 4X4 Front & Rear 410 Running Gear The Muscle Truck must have a Dodge Dana 61 front to be 3.07 gears and the Dana 70 Dodge used with it. The lowest gear for a dana 60 is 3.33 used in Fords. On the project I`m working on I`m useing Dana 61 front (Dodge) and Dana 61 rear (Ford) with 3.00 gears. Are you using the Chevy front sway bar on the project, 73-up? Later Willis __________________ Daily Driver: 1970 C-20 400 sbc,sm-465,Dana 61 one ton SRW rear, 3.07 gears, locker. There are three kinds of people: those who make things happen, those who watch things happen, and those who have no idea what happened! Last edited by 67-72williso; 10-31-2005 at 10:59 PM.

11-01-2005, 12:33 AM	#13
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,019	Re: Matching 3/4 ton 4X4 Front & Rear 410 Running Gear wes i dont know where i am in line for this stuff but if it hasnt been taken let me know....thanks

11-01-2005, 10:09 AM	#14
MeannGrumpy Registered User Join Date: Jan 2003 Location: Medicine Hat, Alberta,Canada Posts: 64	Re: Matching 3/4 ton 4X4 Front & Rear 410 Running Gear Wess if those axles are complete or near complete I will also take them Also being in line somewhere __________________ 1970 Longhorn, factory air & Cruise,Tach vac 1970 C 20 3/4 4x4 350 with turbo 350 auto,

11-01-2005, 04:19 PM	#15
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: Matching 3/4 ton 4X4 Front & Rear 410 Running Gear Wow, I thought that this post had gone by the wayside. The axles that I am using under "Muscle Truck" are 1990 Dodge axles out of a Deisel. I am having to modify the spring mounts on the frame to use them. The axles that I had for sale are gone now. One of the board members bought them a weak ago and came down to pick them up. I will have another set though if I buy a 78 3/4 ton Suburban that has the t-400 / 205 transfer case that I need. The rear spring perches would have to be moved though to bolt under a 67-72. Any interest there? I would also have a good running 454 for sale also. I would be willing to sell out the whole Burb without tranny and transfer case also pretty reasonible. Just exploring my avenues for now. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys



Register or Log In To remove these advertisements.

11-01-2005, 10:19 PM	#16
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,019	Re: Matching 3/4 ton 4X4 Front & Rear 410 Running Gear how much for the axels wes? do you know the ratio yet? i dont have a use for anything else off the burb...thanks

11-02-2005, 04:21 PM	#17
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: Matching 3/4 ton 4X4 Front & Rear 410 Running Gear The guy tells me that he thinks that they are 4.10 but is unsure. He says that it winds up pretty tight going down the freeway, so my guess is that he is probably right. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

11-03-2005, 08:57 PM	#18
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,019	Re: Matching 3/4 ton 4X4 Front & Rear 410 Running Gear price?

11-04-2005, 04:13 PM	#19
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: Matching 3/4 ton 4X4 Front & Rear 410 Running Gear I haven't bought the burb yet. I am awaiting pictures and etc. Price will depend on condition. If they are in good shape probably $450.00 for the set. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

11-05-2005, 01:27 PM	#20
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,019	Re: Matching 3/4 ton 4X4 Front & Rear 410 Running Gear thanks for the quote wes. thats more than i want to spend and still have to modify. mark

Register or Log In To remove these advertisements.