Need info on Jerry Brown/TheTruckShop,TN - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 10-15-2005, 07:39 AM

I was wundering if anyone has contact info for Jerry Brown`s "The Truck Shop" in Crossville,Tennessee.I`m sure some of us have dealt with him before.He goes to the major shows like Charlotte and Carlisle.

71Shortbed · 10-15-2005, 10:06 AM

Here ya go -> http://www.thetruckshop.com/

**special-K** · 10-15-2005, 11:11 AM

Thanks,71Shortbed.I`m feelin`lazy this morning.I have his parts list upstairs and guess I could have tryed the obvious web address,lol.There`s that other newer "The Truck Shop" in California,I guess they varied the name for their sight a bit.

69 air cab · 10-16-2005, 07:22 AM

there is a "thecar&truckshop" in CA. Prices are very good too.

LUV2XCLR8 · 10-16-2005, 07:33 AM

From what I have heard he is a stand up guy, I live in TN, but I do not
buy from him, no particular reason, I just like Tim Christian better.

**special-K** · 10-16-2005, 07:53 AM

He`s one of the Ol,Boys.He builds "better than new" trucks.Definately high-end.He`s built trucks for some country music stars,like Ricky Van Shelton.The other The Truck Shop (& The Car Shop) is a store-front of Counterpart.That`s what they sell and why they can offer better prices.I bought two doors for $400!!Those guys go to Jerry Brown for N.O.S.

69 air cab · 10-16-2005, 07:58 AM

I agree he is a good ol guy. I too have bought some NOS from him and he was very fair. In fact he had two very nice trucks for sale at a show in Knoxville, tn yesterday.

rollinlow · 10-16-2005, 04:05 PM

id rather deal with tim myself iv worked with him before he just dont carry many parts for a s10 hes a real good guy to deal with

teeitup · 10-17-2005, 07:39 AM

I've sold them quite a few parts, good guys to deal with!!!

Huck · 10-17-2005, 08:29 AM

He's been around a long time with high quality restored trucks for sale. last time I looked, he had restored buckets seats for $1,100.and his trucks were priced around $20,000.++ so ----his prices are way up there.
I prefer Tim Christian in Rogersville, Tenn or one of the other board sponsoring vendors (Motherstruckers, Wes, Bill, etc.). They sell the same quality but at much better prices---.

rodstored-72 · 10-17-2005, 03:48 PM

i have bought a few items from jerry. i can say that he did me right & seemed very nice on the phone. the items i got were every bit what i was hoping they would be (used parts). i would go to him for more stuff but ricks pickup parts is next to me & saves me shipping..

rodstored-72

weasel29gm · 10-17-2005, 07:47 PM

I met Jerry at Charlotte years ago before the board and the ones I've dealt with here. He has done this forever and knows his stuff. A guy from here drove his dumptruck to buy a SWB bed from him. $1000 15 yrs ago,thats before the repop ones. Jerry's restored trucks are some the best you ever see. He's one of 67-72's best

**special-K** · 10-18-2005, 07:50 AM

I`ll try to support the board vendors now that I`m into this site.But,no offense,there was life before the internet and guys like Jerry Brown,Seth Doulton,Jim Shenkle(truck builder extrordinare),Gary Terry,and countless others are what helped bring this hobby to the level it has become today.Without them many of the parts would never have become available again so that others might get into their truck parts businesses.We can`t just cast them off.

72 longhorn BB · 10-19-2005, 12:24 PM

I met Jerry, toured his shop on Lantana rd. when I went down to visit my dad in Crossville. Real nice guy.

I walked away with a hard to find bracket I needed.

Man those trucks are REALLY done clean!!!!! I checked in EVERY nook and cranny and it was DONE!

My wife says they look better than they did when they were new.

Very correct trucks, and if you are looking for a turn-key ride, then $24,000.00 is actually a good price for that level of detail. I say that when comparing my stack up if time and dollars needed to do my restoration.

IMHO.

-Chuck

coopdog · 12-01-2014, 09:01 PM

I went and saw jerry brown at his vendor tent at the carlisle national truck show in PA and if ya got a 71-72 chevy truck jerry sells chrome egg crates, i picked one up for my 72 and it sher doe look *****en

**D.PASSMORE** · 12-01-2014, 11:58 PM

Funny, I just talked with him last week at Daytona. He was/is selling a nice BB '70 SWB CST. Pretty much matching numbers all the way through. Super kool guy...

BTW, this is a 2005 thread.

**TBONE1964** · 12-02-2014, 12:05 AM

http://www.thetruckshop.com/contact_us_28.html

I did not talk to Jerry but I did talk to another fellow there named Jason and he did some bezel work for one of my customers a few months ago.

It does sound like they are doing well and business is good.

Hope this helps Tim.

Take care,
Tom

**special-K** · 03-07-2015, 11:28 AM

I've known and dealt with Jerry since we were both noticeably younger

. Back in '05 I was needing to talk with him and started this threat as much to start chatter on him as much as getting contact info the easy way. I think the website had an extra letter added I was leaving out. Had lots more dealings since, both buying and selling, and they are live and kicking as ever. Jason is a casual member here and has been a great boost to Jerry's enterprise. If there was a 67-72 GM Truck hall of fame, I would nominate Jerry for sure.

coopdog · 03-22-2015, 09:07 PM

Special K I was just wondering what Jason's user name is on the sight, I would like to see more pics of his and Jerry's trucks.

**special-K** · 03-22-2015, 10:27 PM

I think it's 72trucks or Trucks72?

coopdog · 03-23-2015, 07:21 AM

Thanks man

**special-K** · 03-23-2015, 09:45 AM

Just checked my friends list. It's trucks72

67shortstepside · 03-24-2015, 10:53 PM

I am friends with both Jerry and Jason .I know Jerry isn't in good health right now but im praying he gets better soon because they are both the nicest guys you will ever meet.

10-15-2005, 07:39 AM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Need info on Jerry Brown/TheTruckShop,TN I was wundering if anyone has contact info for Jerry Brown`s "The Truck Shop" in Crossville,Tennessee.I`m sure some of us have dealt with him before.He goes to the major shows like Charlotte and Carlisle. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-15-2005, 11:11 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Thanks,71Shortbed.I`m feelin`lazy this morning.I have his parts list upstairs and guess I could have tryed the obvious web address,lol.There`s that other newer "The Truck Shop" in California,I guess they varied the name for their sight a bit. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 10-15-2005 at 11:12 AM.

10-16-2005, 07:22 AM	#4
69 air cab Registered User Join Date: Oct 2003 Location: Maryville, TN Posts: 477	Re: Need info on Jerry Brown/TheTruckShop,TN there is a "thecar&truckshop" in CA. Prices are very good too.

10-16-2005, 07:33 AM	#5
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Need info on Jerry Brown/TheTruckShop,TN From what I have heard he is a stand up guy, I live in TN, but I do not buy from him, no particular reason, I just like Tim Christian better. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-16-2005, 07:53 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Need info on Jerry Brown/TheTruckShop,TN He`s one of the Ol,Boys.He builds "better than new" trucks.Definately high-end.He`s built trucks for some country music stars,like Ricky Van Shelton.The other The Truck Shop (& The Car Shop) is a store-front of Counterpart.That`s what they sell and why they can offer better prices.I bought two doors for $400!!Those guys go to Jerry Brown for N.O.S. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-15-2005, 10:06 AM	#2
71Shortbed Registered User Join Date: Jul 2004 Location: Lilburn, GA Posts: 209	Here ya go -> http://www.thetruckshop.com/

10-16-2005, 07:58 AM	#7
69 air cab Registered User Join Date: Oct 2003 Location: Maryville, TN Posts: 477	Re: Need info on Jerry Brown/TheTruckShop,TN I agree he is a good ol guy. I too have bought some NOS from him and he was very fair. In fact he had two very nice trucks for sale at a show in Knoxville, tn yesterday.

10-16-2005, 04:05 PM	#8
rollinlow Registered User Join Date: Sep 2005 Location: tn Posts: 206	Re: Need info on Jerry Brown/TheTruckShop,TN id rather deal with tim myself iv worked with him before he just dont carry many parts for a s10 hes a real good guy to deal with

10-17-2005, 07:39 AM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Need info on Jerry Brown/TheTruckShop,TN I've sold them quite a few parts, good guys to deal with!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-17-2005, 08:29 AM	#10
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Re: Need info on Jerry Brown/TheTruckShop,TN He's been around a long time with high quality restored trucks for sale. last time I looked, he had restored buckets seats for $1,100.and his trucks were priced around $20,000.++ so ----his prices are way up there. I prefer Tim Christian in Rogersville, Tenn or one of the other board sponsoring vendors (Motherstruckers, Wes, Bill, etc.). They sell the same quality but at much better prices---.

10-17-2005, 03:48 PM	#11
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 2,009	Re: Need info on Jerry Brown/TheTruckShop,TN i have bought a few items from jerry. i can say that he did me right & seemed very nice on the phone. the items i got were every bit what i was hoping they would be (used parts). i would go to him for more stuff but ricks pickup parts is next to me & saves me shipping.. rodstored-72

10-17-2005, 07:47 PM	#12
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,097	Re: Need info on Jerry Brown/TheTruckShop,TN I met Jerry at Charlotte years ago before the board and the ones I've dealt with here. He has done this forever and knows his stuff. A guy from here drove his dumptruck to buy a SWB bed from him. $1000 15 yrs ago,thats before the repop ones. Jerry's restored trucks are some the best you ever see. He's one of 67-72's best __________________ 69 C-10, OWNED 38YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

10-18-2005, 07:50 AM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Need info on Jerry Brown/TheTruckShop,TN I`ll try to support the board vendors now that I`m into this site.But,no offense,there was life before the internet and guys like Jerry Brown,Seth Doulton,Jim Shenkle(truck builder extrordinare),Gary Terry,and countless others are what helped bring this hobby to the level it has become today.Without them many of the parts would never have become available again so that others might get into their truck parts businesses.We can`t just cast them off. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 10-19-2005 at 10:51 PM.

10-19-2005, 12:24 PM	#14
72 longhorn BB Registered User Join Date: Jan 2000 Location: Michigan Posts: 312	Re: Need info on Jerry Brown/TheTruckShop,TN I met Jerry, toured his shop on Lantana rd. when I went down to visit my dad in Crossville. Real nice guy. I walked away with a hard to find bracket I needed. Man those trucks are REALLY done clean!!!!! I checked in EVERY nook and cranny and it was DONE! My wife says they look better than they did when they were new. Very correct trucks, and if you are looking for a turn-key ride, then $24,000.00 is actually a good price for that level of detail. I say that when comparing my stack up if time and dollars needed to do my restoration. IMHO. -Chuck __________________ Chuck 1972 C-20 Longhorn 402 BB .030" over (409?), curved HEI, RV cam, quadrajet, dual 3" exhaust, TH 400 ported w/shift kit 1999 K1500 Suburban (old style) 5.7L Vortec 4L60E "No matter where you go, ........ there you are"

12-01-2014, 09:01 PM	#15
coopdog Registered User Join Date: Nov 2012 Location: NYC Posts: 429	Re: Need info on Jerry Brown/TheTruckShop,TN I went and saw jerry brown at his vendor tent at the carlisle national truck show in PA and if ya got a 71-72 chevy truck jerry sells chrome egg crates, i picked one up for my 72 and it sher doe look *****en Attached Images



Register or Log In To remove these advertisements.

12-01-2014, 11:58 PM	#16
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: Need info on Jerry Brown/TheTruckShop,TN Funny, I just talked with him last week at Daytona. He was/is selling a nice BB '70 SWB CST. Pretty much matching numbers all the way through. Super kool guy... BTW, this is a 2005 thread. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie) Last edited by D.PASSMORE; 12-02-2014 at 12:24 AM.

12-02-2014, 12:05 AM	#17
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,262	Re: Need info on Jerry Brown/TheTruckShop,TN http://www.thetruckshop.com/contact_us_28.html I did not talk to Jerry but I did talk to another fellow there named Jason and he did some bezel work for one of my customers a few months ago. It does sound like they are doing well and business is good. Hope this helps Tim. Take care, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

03-07-2015, 11:28 AM	#18
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Need info on Jerry Brown/TheTruckShop,TN I've known and dealt with Jerry since we were both noticeably younger . Back in '05 I was needing to talk with him and started this threat as much to start chatter on him as much as getting contact info the easy way. I think the website had an extra letter added I was leaving out. Had lots more dealings since, both buying and selling, and they are live and kicking as ever. Jason is a casual member here and has been a great boost to Jerry's enterprise. If there was a 67-72 GM Truck hall of fame, I would nominate Jerry for sure. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-22-2015, 09:07 PM	#19
coopdog Registered User Join Date: Nov 2012 Location: NYC Posts: 429	Re: Need info on Jerry Brown/TheTruckShop,TN Special K I was just wondering what Jason's user name is on the sight, I would like to see more pics of his and Jerry's trucks. __________________ .................._____ __________//___{\____ /__---____//____/__---/ .....(O). ..................(O). BUILD THREAD K20 http://67-72chevytrucks.com/vboard/s...d.php?t=651601 pages 2-4

03-22-2015, 10:27 PM	#20
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Need info on Jerry Brown/TheTruckShop,TN I think it's 72trucks or Trucks72? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-23-2015, 07:21 AM	#21
coopdog Registered User Join Date: Nov 2012 Location: NYC Posts: 429	Re: Need info on Jerry Brown/TheTruckShop,TN Thanks man __________________ .................._____ __________//___{\____ /__---____//____/__---/ .....(O). ..................(O). BUILD THREAD K20 http://67-72chevytrucks.com/vboard/s...d.php?t=651601 pages 2-4

03-23-2015, 09:45 AM	#22
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Need info on Jerry Brown/TheTruckShop,TN Just checked my friends list. It's trucks72 __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-24-2015, 10:53 PM	#23
67shortstepside Registered User Join Date: Jul 2014 Location: Alabama Posts: 112	Re: Need info on Jerry Brown/TheTruckShop,TN I am friends with both Jerry and Jason .I know Jerry isn't in good health right now but im praying he gets better soon because they are both the nicest guys you will ever meet.

Register or Log In To remove these advertisements.