Stepper rear bumper rock shields - The 1947 - Present Chevrolet & GMC Truck Message Board Network

beaterC10 · 10-16-2005, 09:22 PM

Does anyone know where I can get a set of rock shields that attach to the rear bumper brackets for a stepside with a non-step bumper.

I tried looking them up on GM Parts direct and didn't find any. I also tried a few parts vendors, as close as I got was a listing for only the left side.

Since the stepper bumpers are the same 67-87 I was wondering if the the rock shields were the same.

I would appreciate any insight anyone has. Thanks.

PS Like the new look for the board.

**Captkaos** · 10-17-2005, 04:56 PM

The gravel protectors right? They are the same for both sides. I can get them for the stepsides and fleetsides.

beaterC10 · 10-17-2005, 05:08 PM

Quote:

Originally Posted by Captkaos

The gravel protectors right? They are the same for both sides. I can get them for the stepsides and fleetsides.

Yes, the stamped sheet metal that is located between the bumper and the bed. The only difference is the attaching hole placement. The holes are offset toward the outside of the shields, so they won't swap side to side. When you get a chance can you give me a price shipped to 46229? Thnanks.

**Captkaos** · 10-17-2005, 05:10 PM

Sure, is this for an '81-87?

beaterC10 · 10-17-2005, 05:12 PM

Quote:

Originally Posted by Captkaos

Sure, is this for an '81-87?

Yes, 84 SWB stepper

**Captkaos** · 10-17-2005, 05:25 PM

Well, I can get it and it is $11.20 + $6 shipping, but I can save you some shipping/cost by giving you the GM Part number. It is 325467.

1974gmc · 10-17-2005, 10:25 PM

anyone have pictures of these? i dont think ive seen em before

beaterC10 · 10-18-2005, 01:36 PM

Quote:

Originally Posted by Captkaos

Well, I can get it and it is $11.20 + $6 shipping, but I can save you some shipping/cost by giving you the GM Part number. It is 325467.

Thanks for the help.

**Captkaos** · 10-18-2005, 03:54 PM

You're welcome. Is that the info you needed?

beaterC10 · 10-18-2005, 05:03 PM

It looks like it. The only concern I have is that the GM illustration that shows these doesn't make a distinction between a stepper and fleetside shield. I assume they are different, but maybe I'm wrong. I thought I would call a local dealer and verify the fitment.

beaterC10 · 10-25-2005, 10:15 PM

Looks like GM has discontinued the stepper gravel shields. I found a pair through Parts Zone Online for $6 and some change per side. Looks like if anyone else needs them, now would be a good time to look for some before they completely disappear.

Thanks again Capt.

10-16-2005, 09:22 PM	#1
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	Stepper rear bumper rock shields Does anyone know where I can get a set of rock shields that attach to the rear bumper brackets for a stepside with a non-step bumper. I tried looking them up on GM Parts direct and didn't find any. I also tried a few parts vendors, as close as I got was a listing for only the left side. Since the stepper bumpers are the same 67-87 I was wondering if the the rock shields were the same. I would appreciate any insight anyone has. Thanks. PS Like the new look for the board.

10-17-2005, 04:56 PM	#2
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: Stepper rear bumper rock shields The gravel protectors right? They are the same for both sides. I can get them for the stepsides and fleetsides. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

10-17-2005, 05:10 PM	#4
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: Stepper rear bumper rock shields Sure, is this for an '81-87? __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

10-17-2005, 05:25 PM	#6
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: Stepper rear bumper rock shields Well, I can get it and it is $11.20 + $6 shipping, but I can save you some shipping/cost by giving you the GM Part number. It is 325467. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com Last edited by Captkaos; 10-17-2005 at 05:25 PM.

10-17-2005, 10:25 PM	#7
1974gmc In Progress Join Date: Feb 2005 Location: Kamloops, BC, Canada Posts: 312	Re: Stepper rear bumper rock shields anyone have pictures of these? i dont think ive seen em before __________________ 1993 Chevrolet K2500 454 4L80E 1974 GMC 1/2t 2wd Stepside 305 auto sold 1985 Ford Mustang GT 5.0 5spd

10-18-2005, 03:54 PM	#9
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: Stepper rear bumper rock shields You're welcome. Is that the info you needed? __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

10-18-2005, 05:03 PM	#10
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	Re: Stepper rear bumper rock shields It looks like it. The only concern I have is that the GM illustration that shows these doesn't make a distinction between a stepper and fleetside shield. I assume they are different, but maybe I'm wrong. I thought I would call a local dealer and verify the fitment.

10-25-2005, 10:15 PM	#11
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	Re: Stepper rear bumper rock shields Looks like GM has discontinued the stepper gravel shields. I found a pair through Parts Zone Online for $6 and some change per side. Looks like if anyone else needs them, now would be a good time to look for some before they completely disappear. Thanks again Capt.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.