Wiper knob wiring help please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Burbinite · 10-20-2005, 09:07 AM

The PO of my 4x4 put a generic headlight pull switch in for the wipers. I have obtained the correct knob but I need to know which wire goes where. I have a blue, a lite blue, and a black wire to be connected. If any knows or has a dash apart right now and can let me know I would really appreciate it!

Thanks in advance!

I wasn't getting any reads so I edited the title for more attention

Putter · 10-20-2005, 01:40 PM

What you are looking at is the factory plug that is on the harness. The colors are light blue on top. dark blue in the center, and black on the bottom.

Burbinite · 10-20-2005, 03:45 PM

Thank you very much Putter! PO cut the plug off but at least I'll be able to squirt!

Boydness · 10-26-2005, 09:13 PM

:tj:

What are the correct positions of the wiring to the wiper motor itself?

I am trying to sort out the wiring to my wipers on my 72, but I seem to have something wired wrong and the wiring diagrams do not seem to match or show it clearly enough to understand...

Putter · 10-27-2005, 12:44 PM

I will go out and get the positions for you. I saw your post that has a drawing on it, and I think I see the problem, but hate to tell you what it is before I verify it myself. Under the dash is no place to start a fire, huh?????

10-20-2005, 09:07 AM	#1
Burbinite Registered User Join Date: May 2004 Location: North Little Rock, AR Posts: 63	Margaret Thatcher naked on a cold day! Wiper knob wiring help please The PO of my 4x4 put a generic headlight pull switch in for the wipers. I have obtained the correct knob but I need to know which wire goes where. I have a blue, a lite blue, and a black wire to be connected. If any knows or has a dash apart right now and can let me know I would really appreciate it! Thanks in advance! I wasn't getting any reads so I edited the title for more attention __________________ 1972 GMC 4x4 Suburban F&R A/C 1978 Pontiac Trans Am 400(Z) all stock Last edited by Burbinite; 10-20-2005 at 11:45 AM. Reason: no reads

10-20-2005, 01:40 PM	#2
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Wiper knob wiring help please What you are looking at is the factory plug that is on the harness. The colors are light blue on top. dark blue in the center, and black on the bottom. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

10-20-2005, 03:45 PM	#3
Burbinite Registered User Join Date: May 2004 Location: North Little Rock, AR Posts: 63	Re: Wiper knob wiring help please Thank you very much Putter! PO cut the plug off but at least I'll be able to squirt! __________________ 1972 GMC 4x4 Suburban F&R A/C 1978 Pontiac Trans Am 400(Z) all stock

10-26-2005, 09:13 PM	#4
Boydness Projects follow me home... Join Date: Aug 2005 Location: St Marys, OH Posts: 88	Re: Wiper knob wiring help please :tj: What are the correct positions of the wiring to the wiper motor itself? I am trying to sort out the wiring to my wipers on my 72, but I seem to have something wired wrong and the wiring diagrams do not seem to match or show it clearly enough to understand... __________________ '51 Willys Wagon (SBC 350) '56 Willys Wagon (SBC 350) '77 Chevy Corvette 350 '79 Chevy G30 (Coachmen) 350 '79 Chevy G30 (Transvan) 350

10-27-2005, 12:44 PM	#5
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Wiper knob wiring help please I will go out and get the positions for you. I saw your post that has a drawing on it, and I think I see the problem, but hate to tell you what it is before I verify it myself. Under the dash is no place to start a fire, huh????? __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.