Another project truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Joesjunk** · 10-23-2005, 12:15 AM

I just bought this truck from griesel72. It is a 1971 3/4t 4x4. I plan on using all my good sheet metal I have been saving for it. Not sure when I will actually get to it though?? ( I have several other things that need to be done first).

Thanks again David for bringing the truck up to me!!!

70 shorty · 10-23-2005, 08:28 AM

Shoot, that looks a lot better than mine even with the sheetmetal on it now.

Sweet72 · 10-23-2005, 08:34 AM

Nice 4WD project.

matthufham · 10-23-2005, 10:58 AM

all you need is a cowl, 2 bumpers, some lights, and a little air in the tires, and it's good to go.

krue · 10-23-2005, 11:01 AM

Looks better than most of the stuff in my yard.

**Canadian694x4** · 10-23-2005, 01:37 PM

Good to see it went into good hands! Should be a great project when you get to 'er!

meathead95 · 10-23-2005, 02:19 PM

pic no worky?

chevy_fatman · 10-23-2005, 03:44 PM

Quote:

Originally Posted by meathead95

pic no worky?

Working just fine for me.

The only thing needed are some tow hooks!

**Joesjunk** · 10-23-2005, 05:39 PM

Quote:

Originally Posted by chevy_fatman

Working just fine for me.

The only thing needed are some tow hooks!

I just so happen to have a nice set that has been waiting for this truck, ( along with a few other items!)

I need another NOS front hub cap for a 3/4ton.

LUV2XCLR8 · 10-23-2005, 05:55 PM

Nice find JOE, can't wait to see the progress

*72CSTC5* · 10-23-2005, 08:57 PM

WOW! That stuff would be hanging on the wall of my house too.

67-72williso · 10-23-2005, 09:15 PM

Joe them hubcaps are hard to find. I gave $300 for a set of N.O.S. ones. I think I know where a set of used ones is. He was wanting $75 for them.
Later Willis

**too much stuff** · 10-23-2005, 10:13 PM

Joe, you are out of control!!!! Should be nice when you are done. Keep showing more pics from your basement. Can't get enough of them... Eric

**Joesjunk** · 10-23-2005, 10:26 PM

Quote:

Originally Posted by 67-72williso

Joe them hubcaps are hard to find. I gave $300 for a set of N.O.S. ones. I think I know where a set of used ones is. He was wanting $75 for them.
Later Willis

I might be interested in the used ones if they are fairly nice.

chevy_fatman · 10-23-2005, 10:34 PM

Quote:

Originally Posted by Joesjunk

I just so happen to have a nice set that has been waiting for this truck, ( along with a few other items!)

Shhwweeettt~!!! drooling!

longhorn71 · 10-23-2005, 10:48 PM

nice looking

the steelmetal on that one is way better then my project

**special-K** · 10-23-2005, 10:51 PM

Quote:

Originally Posted by Joesjunk

I just so happen to have a nice set that has been waiting for this truck, ( along with a few other items!)

I need another NOS front hub cap for a 3/4ton.

And,Some more rare parts to hang on the wall.

Brainchild · 10-23-2005, 10:57 PM

Project nothing,that looks better than my driver

Good find.

BLAZERMAN · 10-23-2005, 11:19 PM

Looks like a nice poject Joe, are you going to use the 1 ton cab on this truck?

nu2-72 · 10-24-2005, 10:08 AM

Nice project Joe. Let me know if you need ahand. Have some free time now.

**Joesjunk** · 10-24-2005, 06:05 PM

Rob, Yes this will get the 1 ton cab I have been saving. I also have a mint original paint bed for it.

Kevin, Thanks for the offer!! I need to talk to you about the front hub bolts and washers. ( I want some new ones )

All the sheetmetal on this truck is for sale.

FRENCHBLUE72 · 10-24-2005, 07:12 PM

Looks like a great start to a nice ride... I am sure you have lots of great parts to put on it..

teeitup · 10-24-2005, 10:07 PM

Thats a GOOD project Joe!!!!!! I've seen alot of those parts before

, bed cab, rolling chassis, etc. all from different trucks I parted, David got them all from me. Alot of these trucks in this area come around and go around between you and me!!

gr72K20 · 10-25-2005, 02:37 PM

Joe, will the cab be for sale? Tnx

**Joesjunk** · 10-25-2005, 05:08 PM

Yes, The cab is for sale. Not sure how much yet, probally around the $450.00 range?? If you are interested PM me for more info.

Thanks, Joe

10-23-2005, 12:15 AM	#1
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,709	Another project truck I just bought this truck from griesel72. It is a 1971 3/4t 4x4. I plan on using all my good sheet metal I have been saving for it. Not sure when I will actually get to it though?? ( I have several other things that need to be done first). Thanks again David for bringing the truck up to me!!! Attached Images __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

10-23-2005, 08:28 AM	#2
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,772	Re: Another project truck Shoot, that looks a lot better than mine even with the sheetmetal on it now. __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

10-23-2005, 08:34 AM	#3
Sweet72 Registered User Join Date: Nov 2003 Location: Alexandria, VA Posts: 1,534	Re: Another project truck Nice 4WD project. __________________ '72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction. Last edited by Sweet72; 10-23-2005 at 08:34 AM.

10-23-2005, 10:58 AM	#4
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: Another project truck all you need is a cowl, 2 bumpers, some lights, and a little air in the tires, and it's good to go.

10-23-2005, 11:01 AM	#5
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: Another project truck Looks better than most of the stuff in my yard. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

10-23-2005, 01:37 PM	#6
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Re: Another project truck Good to see it went into good hands! Should be a great project when you get to 'er! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

10-23-2005, 02:19 PM	#7
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: Another project truck pic no worky? __________________ 72 2wd blazer 72 swb 4x4

10-23-2005, 05:55 PM	#10
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Another project truck Nice find JOE, can't wait to see the progress __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-23-2005, 08:57 PM	#11
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,522	Re: Another project truck WOW! That stuff would be hanging on the wall of my house too.

10-23-2005, 09:15 PM	#12
67-72williso Junk/Daily Driver Club Join Date: Feb 2004 Location: Manheim, PA 17545 Posts: 253	Re: Another project truck Joe them hubcaps are hard to find. I gave $300 for a set of N.O.S. ones. I think I know where a set of used ones is. He was wanting $75 for them. Later Willis __________________ Daily Driver: 1970 C-20 400 sbc,sm-465,Dana 61 one ton SRW rear, 3.07 gears, locker. There are three kinds of people: those who make things happen, those who watch things happen, and those who have no idea what happened!

10-23-2005, 10:13 PM	#13
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,791	Re: Another project truck Joe, you are out of control!!!! Should be nice when you are done. Keep showing more pics from your basement. Can't get enough of them... Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-23-2005, 10:48 PM	#16
longhorn71 Senior Member Join Date: Sep 2004 Location: CANADA Posts: 1,681	Re: Another project truck nice looking the steelmetal on that one is way better then my project

10-23-2005, 10:57 PM	#18
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	Re: Another project truck Project nothing,that looks better than my driver Good find. __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website

10-23-2005, 11:19 PM	#19
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Re: Another project truck Looks like a nice poject Joe, are you going to use the 1 ton cab on this truck? __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

10-24-2005, 10:08 AM	#20
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Re: Another project truck Nice project Joe. Let me know if you need ahand. Have some free time now. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide



Register or Log In To remove these advertisements.

10-24-2005, 06:05 PM	#21
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,709	Re: Another project truck Rob, Yes this will get the 1 ton cab I have been saving. I also have a mint original paint bed for it. Kevin, Thanks for the offer!! I need to talk to you about the front hub bolts and washers. ( I want some new ones ) All the sheetmetal on this truck is for sale. __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

10-24-2005, 07:12 PM	#22
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Another project truck Looks like a great start to a nice ride... I am sure you have lots of great parts to put on it.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

10-24-2005, 10:07 PM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Another project truck Thats a GOOD project Joe!!!!!! I've seen alot of those parts before , bed cab, rolling chassis, etc. all from different trucks I parted, David got them all from me. Alot of these trucks in this area come around and go around between you and me!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-25-2005, 02:37 PM	#24
gr72K20 Registered User Join Date: Jul 2001 Location: Wausau, Wisc., U. S. A. Posts: 37	Re: Another project truck Joe, will the cab be for sale? Tnx __________________ 72K20 Longbed Stepside 350 4bbl, 4sp, NP205

10-25-2005, 05:08 PM	#25
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,709	Re: Another project truck Yes, The cab is for sale. Not sure how much yet, probally around the $450.00 range?? If you are interested PM me for more info. Thanks, Joe __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

Register or Log In To remove these advertisements.