Heads up, will be parting a 71 burb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 10-23-2005, 07:57 PM

I will probably part this one out, but it won't happen quick. ( its hunting season ya know) If you see something of interest, ask and i will post a price. Someone from calif. (i think) was looking for the upper trim, so they can have first option on that. A few smaller pieces are spoken for also. 1/2 ton 2wd. I will probably keep the posi, and engine and tranny are gone. Body panels are about shot, rear interior panels i am hanging onto also for now.

mkundo · 10-23-2005, 11:47 PM

I would like to have the two (2) front seat swirl mounts that bolt the buckets
to the floor.
Thanks MK

Tobasko · 10-24-2005, 05:45 AM

Hello,

I like the overriders and the taillights. If they r in good shape.. And if ur willing to ship to the Netherlands (europe)

**Hart_Rod** · 10-24-2005, 10:10 AM

How good is the liftgate? Roofrack? and how much?

Rob

**too much stuff** · 10-24-2005, 10:45 AM

Let me check these parts out and see what condition they are in.

tobasko, what are the overriders?

The liftgate has rust. i think the roof rack had a slight bend in one rail.

I bought this one a week ago and only had time to dump it off at storage and snap a few pics. That is why i have to look it over again and let you guys know. Eric

earl87gta · 10-24-2005, 11:41 AM

Put me in line for the front seats uper trim and rear pannel trim.
Thanks Earl

qksilver · 10-24-2005, 12:41 PM

Looks good.............I would be interested in the chrome below the glass and the roof rack ....,,,,,,,shipped! It was a nice ride the last time but way to far north for a southern boy!
Thanks,
Steve

**too much stuff** · 10-24-2005, 02:58 PM

The guy from calif. contacted me and will get first dibs on the upper chrome.
Steve, c'mon back. Just make sure you have more room this time.
I will look it over in the next couple days.

Tobasko · 10-24-2005, 04:28 PM

TMS, I ment the bumper guards...

396 SS · 10-24-2005, 07:15 PM

I am looking for rear door panels ,That are not rusty and what would it cost to ship the back seat to Oklahoma 74932

mkundo · 10-24-2005, 07:19 PM

Heads Up,
I have sent you an PM with information on parts needed.
Thanks MK

Paul72 · 10-25-2005, 06:53 PM

Eric,

What shape is the inner & outer grill in?

What the price on those?

Thanks!

Paul

**too much stuff** · 10-27-2005, 12:15 AM

I took some pics today. I will post them with some prices in the morning.

**too much stuff** · 10-27-2005, 10:50 AM

mkundo, The front swivel mounts have some rust on the bases. $50 plus ship
tobasko, the tail light lenses look good. $20. The front gaurds are pretty rough. $15 plus shipping. i have not shipped overseas, but i would try to help you out.
Hart rob, Liftgate is pretty rough, Roof rack has a bow in one crossover. $80 plus ride depending how easy it comes off.
earl87, $80 plus ride on front seats. Rear panels i'm hanging onto for now.
qksilver, you are second for both items.
396 ss rear panels are driver quality at best. They look ok but both sides have a couple small tears. $35 plus ride. I prefer to not ship the rear seat unless you handle the arrangements.
Paul72. the grill was nice till he backed into it with the skidder. $50 if you want to come pull it.
cornnutz, $100 plus ride on the upper trim it is dirty but looks straight. Someone put their initials below both windows. (see pic) How hard is it to pull the upper trim?

**too much stuff** · 10-27-2005, 10:59 AM

A few more pics...

**too much stuff** · 10-29-2005, 10:42 AM

ttt for the weekend crowd

shelby987 · 10-29-2005, 11:15 AM

What price are you looking for for the dash and the heater control? What gauges does the dash have? Is the heater control non A/C?.
Would like to be first in line if the price is right, thanks!

**too much stuff** · 10-29-2005, 08:35 PM

Shelby, The dash has the 5 gauges, (no tach) I think there was a little surface rust on a gauge or two.$25 It also has a non a/c control in it. If all the arms are good, $25 plus shipping on both. I will be gone for a week but i can look them over when i get back if you want. Eric

**70STOVEBOLT** · 10-31-2005, 02:40 PM

How about the steering wheel? What shape, how much, and how much to ship to 46562 (IN)?

**too much stuff** · 11-04-2005, 11:28 PM

70stovebolt. The steering wheel is pretty rough.

**70STOVEBOLT** · 11-05-2005, 08:10 AM

Ok, thanks anyway.

bud45 · 11-05-2005, 09:37 AM

If it has coil suspension, what does it look like? Are the coils really depressed or are they still standing up pretty good?How much to Satsuma, AL 36572? E-mail me at: bud45@bellsouth.net

**too much stuff** · 11-05-2005, 11:44 AM

Bud,It has been parked on the edge of a swamp since 92. I can look, but i would think you could find better closer to home. Let me know if you want me to look. Eric

bud45 · 11-11-2005, 01:38 AM

Eric, if it's been there that long, then it may not be worth the trouble; thanks for the heads-up! Bud

Tobasko · 11-11-2005, 03:43 AM

Sorry for late reply...
The bumper guards look 2 rough 4 me.. And shipping only the taillights is not really a great idea (extra costs).

Thank you anyway.

10-23-2005, 07:57 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Heads up, will be parting a 71 burb I will probably part this one out, but it won't happen quick. ( its hunting season ya know) If you see something of interest, ask and i will post a price. Someone from calif. (i think) was looking for the upper trim, so they can have first option on that. A few smaller pieces are spoken for also. 1/2 ton 2wd. I will probably keep the posi, and engine and tranny are gone. Body panels are about shot, rear interior panels i am hanging onto also for now. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-23-2005, 11:47 PM	#2
mkundo Registered User Join Date: Feb 2004 Location: Ca. Posts: 366	Re: Heads up, will be parting a 71 burb I would like to have the two (2) front seat swirl mounts that bolt the buckets to the floor. Thanks MK __________________ Dan

10-24-2005, 05:45 AM	#3
Tobasko Registered User Join Date: Apr 2005 Location: The Netherlands Posts: 56	Re: Heads up, will be parting a 71 burb Hello, I like the overriders and the taillights. If they r in good shape.. And if ur willing to ship to the Netherlands (europe)

10-24-2005, 10:10 AM	#4
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Heads up, will be parting a 71 burb How good is the liftgate? Roofrack? and how much? Rob __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

10-24-2005, 10:45 AM	#5
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Heads up, will be parting a 71 burb Let me check these parts out and see what condition they are in. tobasko, what are the overriders? The liftgate has rust. i think the roof rack had a slight bend in one rail. I bought this one a week ago and only had time to dump it off at storage and snap a few pics. That is why i have to look it over again and let you guys know. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-24-2005, 11:41 AM	#6
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: Heads up, will be parting a 71 burb Put me in line for the front seats uper trim and rear pannel trim. Thanks Earl __________________ Earl 68 2500 4x4 GMC Burb

10-24-2005, 12:41 PM	#7
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: Heads up, will be parting a 71 burb Looks good.............I would be interested in the chrome below the glass and the roof rack ....,,,,,,,shipped! It was a nice ride the last time but way to far north for a southern boy! Thanks, Steve

10-24-2005, 02:58 PM	#8
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Heads up, will be parting a 71 burb The guy from calif. contacted me and will get first dibs on the upper chrome. Steve, c'mon back. Just make sure you have more room this time. I will look it over in the next couple days. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-24-2005, 04:28 PM	#9
Tobasko Registered User Join Date: Apr 2005 Location: The Netherlands Posts: 56	Re: Heads up, will be parting a 71 burb TMS, I ment the bumper guards...

10-24-2005, 07:15 PM	#10
396 SS Registered User Join Date: Feb 2005 Location: Cameron, Ok. Posts: 112	Re: Heads up, will be parting a 71 burb I am looking for rear door panels ,That are not rusty and what would it cost to ship the back seat to Oklahoma 74932

10-24-2005, 07:19 PM	#11
mkundo Registered User Join Date: Feb 2004 Location: Ca. Posts: 366	Re: Heads up, will be parting a 71 burb Heads Up, I have sent you an PM with information on parts needed. Thanks MK __________________ Dan

10-25-2005, 06:53 PM	#12
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	Re: Heads up, will be parting a 71 burb Eric, What shape is the inner & outer grill in? What the price on those? Thanks! Paul __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

10-27-2005, 12:15 AM	#13
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Heads up, will be parting a 71 burb I took some pics today. I will post them with some prices in the morning. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-27-2005, 10:50 AM	#14
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Heads up, will be parting a 71 burb mkundo, The front swivel mounts have some rust on the bases. $50 plus ship tobasko, the tail light lenses look good. $20. The front gaurds are pretty rough. $15 plus shipping. i have not shipped overseas, but i would try to help you out. Hart rob, Liftgate is pretty rough, Roof rack has a bow in one crossover. $80 plus ride depending how easy it comes off. earl87, $80 plus ride on front seats. Rear panels i'm hanging onto for now. qksilver, you are second for both items. 396 ss rear panels are driver quality at best. They look ok but both sides have a couple small tears. $35 plus ride. I prefer to not ship the rear seat unless you handle the arrangements. Paul72. the grill was nice till he backed into it with the skidder. $50 if you want to come pull it. cornnutz, $100 plus ride on the upper trim it is dirty but looks straight. Someone put their initials below both windows. (see pic) How hard is it to pull the upper trim? Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-27-2005, 10:59 AM	#15
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Heads up, will be parting a 71 burb A few more pics... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto



Register or Log In To remove these advertisements.

10-29-2005, 10:42 AM	#16
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Heads up, will be parting a 71 burb ttt for the weekend crowd __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-29-2005, 11:15 AM	#17
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	Re: Heads up, will be parting a 71 burb What price are you looking for for the dash and the heater control? What gauges does the dash have? Is the heater control non A/C?. Would like to be first in line if the price is right, thanks!

10-29-2005, 08:35 PM	#18
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Heads up, will be parting a 71 burb Shelby, The dash has the 5 gauges, (no tach) I think there was a little surface rust on a gauge or two.$25 It also has a non a/c control in it. If all the arms are good, $25 plus shipping on both. I will be gone for a week but i can look them over when i get back if you want. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-31-2005, 02:40 PM	#19
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: Heads up, will be parting a 71 burb How about the steering wheel? What shape, how much, and how much to ship to 46562 (IN)?

11-04-2005, 11:28 PM	#20
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Heads up, will be parting a 71 burb 70stovebolt. The steering wheel is pretty rough. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-05-2005, 08:10 AM	#21
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: Heads up, will be parting a 71 burb Ok, thanks anyway.

11-05-2005, 09:37 AM	#22
bud45 Registered User Join Date: Nov 2004 Location: Satsuma, AL Posts: 72	Re: Heads up, will be parting a 71 burb If it has coil suspension, what does it look like? Are the coils really depressed or are they still standing up pretty good?How much to Satsuma, AL 36572? E-mail me at: bud45@bellsouth.net

11-05-2005, 11:44 AM	#23
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Heads up, will be parting a 71 burb Bud,It has been parked on the edge of a swamp since 92. I can look, but i would think you could find better closer to home. Let me know if you want me to look. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-11-2005, 01:38 AM	#24
bud45 Registered User Join Date: Nov 2004 Location: Satsuma, AL Posts: 72	Re: Heads up, will be parting a 71 burb Eric, if it's been there that long, then it may not be worth the trouble; thanks for the heads-up! Bud

11-11-2005, 03:43 AM	#25
Tobasko Registered User Join Date: Apr 2005 Location: The Netherlands Posts: 56	Re: Heads up, will be parting a 71 burb Sorry for late reply... The bumper guards look 2 rough 4 me.. And shipping only the taillights is not really a great idea (extra costs). Thank you anyway.

Register or Log In To remove these advertisements.