What is it worth? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DREW67** · 10-26-2005, 08:51 AM

67 GMC do not know the miles on engine it is a 350 combo but the truck is straight and rust free except for a small spot on the floor on the driver side.
Let me know what you think.

Thanks,
Drew67

Joe67 · 10-26-2005, 09:19 AM

Very nice, not often you see a 1967 GMC SWB Stepside truck in good shape

67ChevyRedneck · 10-26-2005, 09:45 AM

I know a lot of peeps will disagree, but if that thing is as clean and straight as the pics I'd go as high as 3,000 on it. IMO anything over 3K should have at least a decent paint job. Looks like its only minor bodywork and a paint job away from being really nice. I'd be willing to pay more up front for a clean straight truck, than get one for 500 and spenk 5K in body parts/labor later. Thats a great looking truck and if your asking if you should buy it the answer is absolutely.

**Yukon Jack** · 10-26-2005, 09:45 AM

Looks awfully straight and rust free. Is it actually rust free? If so, that will add to its value big time. The stepsides are in demand as you probably know. I focus more on the 4x4's but I would throw a guess out that it should be worth at least $2,000 - $2,500, others will respond that are more in the know on what it is worth than me.

**DREW67** · 10-26-2005, 10:24 AM

The guy is asking $4000.00 for it. I live in KC.Mo. it is very hard to find a rust free truck here in Mo. I would like to have this truck this truck is exactly like my very first truck when all of my troubles began I got hooked.
We will see what happens is $3500 to much?

bigblue1968 · 10-26-2005, 10:43 AM

not for that part of the country H3ll no, buy it or i will.

ACES · 10-26-2005, 11:00 AM

I wouldn't pay more than $2500 for it. Mainly because of the paintjob, but also because these trucks aren't selling very well right now and I wouldn't pay top dollar for any of them.

Rdub · 10-26-2005, 04:02 PM

A 70 short stepside, I-6 sold here in Portland on ebay a couple months back for $2300. I looked at it & offered the guy a 1000. he laughed.... it was rusted through all around the bed floor, several spots in the side & end panels, rockers, cab supports & front end was tweaked on drivers side, needed new outer grille and some realignment/body work on the hood & fender.... oh, new Earl Scheib paint, new rear fenders, interior was unrestored & needed a lot of work. Couldn't believe he got that much for it... as previoulsy mentioned, seems like the short steppers are in high demand.

davidh · 10-26-2005, 04:08 PM

Seems like I sold a somewhat decent 69stepside that had no motor for $800-900 2years ago. It sold the 2days after I put it in the truck trader. Maybe I low-balled it.

tomatocity · 10-26-2005, 04:13 PM

Quote:

Originally Posted by DREW67

67 GMC do not know the miles on engine it is a 350 combo but the truck is straight and rust free except for a small spot on the floor on the driver side.
Let me know what you think. Thanks, Drew67

First of all it is not rust free if it has rust. Rust usually does not live alone. Lift the carpet or mat and check for other rust spots. Crawl under the truck and look at all the usual rusted areas.
You say he is asking $4000. Have a friend go with you and give him $500 in cash. Take $3000 in cash and put it in your pocket. Pull the GREEN CASH out of your pocket and offer him $3000 cash. If he counter offers with $3500, and you want to pay that much, ask your friend if he has any cash and get your $500 from him? Shake hands, do the paper work, drive away and try to quit smiling.

davidh · 10-26-2005, 05:13 PM

I lived in Kansas City four years, moving from N. Oklahoma. Amazing what a "little rust there" is and a "little rust here" is. People were selling cars I wouldn't have considerd fixing. I bought a 79 firebird for the drivetrain. It ran great but was so rusty, the framerails were rusted at the leaf spring perches mounts, made the car shift, and twist so bad. My rule of thumb now is not buying cars north of Wichita.(ha, ha)

**DREW67** · 10-26-2005, 05:19 PM

This Truck is in New Mexico.

68shortstep · 10-26-2005, 05:34 PM

Mine had a good paint job, but it was put on over cheap-cr*p prep work. I knew at the time I'd end up having to re-do it all someday, and I still bought the truck.

Tomatocity's advice seems like a good plan, to me.
"Buy it, drive it, enjoy it, and don't look back."

A year from now, it'll seem like you made a steal at that price. These steppers in that good condition are getting harder to find every day; most of them around here are absolutely beat-to-death farmer trucks.

**72ironmike** · 10-26-2005, 07:50 PM

Andrew, ask if the truck has always been in New Mexico. Many of these south, west and southwest trucks started life all over the country and the owners moved to these areas, some after being in rustbelts. If you can trust that the description is true, I don't believe that even $4000 is a bad buy. But $4000 is absolutley at the top end of pricing for that truck in my opinion. How long has the truck been for sale? The law of economics has to apply here somewhere.

teeitup · 10-26-2005, 07:58 PM

Andrew, I'd think $3000-$3500 wouldn't be a bad buy at all, I think it could be fixed up real easily!!!!! Nice find!!!!!!

**special-K** · 10-26-2005, 08:49 PM

I really like it,it`s the way I like to get them.A straight solid body is the most important thing to look for in my opinion.But,I think he`s shootin`high at $4,000.I`d start off telling him you`d feel alot better if it was more in the $3,000 range.His price is to high for the driver market.The body is a great head-start on a restoration.But,mechanicals(not discs now/whatever else),interior(ripped old mat,cheap cover on seat`n`doors,horn button gone),it needs paint(that ain`t cheap),all the weatherstrip,looks like a Chevy bumper to me.It`s gonna take alot of money to cherry it out.I don`t see that alot of money`s been put in it.More of a survivor,a great start.I`d say $2,500-3,500.I doubt you`ll see this one go for less than $3,500 from this guy.

weasel29gm · 10-26-2005, 09:03 PM

2k tops

**clay68c10** · 10-26-2005, 09:16 PM

I with the $3000-3500 price. I would rather buy faded original paint than covered up bodywork. Don't forget what kind of money it will take to get the bed floor nice...

**72ironmike** · 10-29-2005, 03:54 PM

OK Drew, what did you do?

LUV2XCLR8 · 10-29-2005, 04:45 PM

Quote:

Originally Posted by ACES

I wouldn't pay more than $2500 for it. Mainly because of the paintjob, but also because
these trucks aren't selling very well right now and I wouldn't pay top dollar for any of them.

I sort of agree, 67, small back window, stepper w/ no cutout, GMC, I'd go as high a 3 g's

larry may · 10-29-2005, 05:14 PM

Drew Last One I bought is/was close to what you are showing I paid 2,400.00 for it right here in Missouri. Been scrounging parts to get it they way I want it ever since. Special- K is telling you right for where it is . Every one else is right TOO! Larry

10-26-2005, 08:51 AM	#1
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,029	What is it worth? 67 GMC do not know the miles on engine it is a 350 combo but the truck is straight and rust free except for a small spot on the floor on the driver side. Let me know what you think. Thanks, Drew67 Attached Images __________________ DREW67

10-26-2005, 09:19 AM	#2
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Re: What is it worth? Very nice, not often you see a 1967 GMC SWB Stepside truck in good shape __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

10-26-2005, 09:45 AM	#3
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: What is it worth? I know a lot of peeps will disagree, but if that thing is as clean and straight as the pics I'd go as high as 3,000 on it. IMO anything over 3K should have at least a decent paint job. Looks like its only minor bodywork and a paint job away from being really nice. I'd be willing to pay more up front for a clean straight truck, than get one for 500 and spenk 5K in body parts/labor later. Thats a great looking truck and if your asking if you should buy it the answer is absolutely. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

10-26-2005, 09:45 AM	#4
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: What is it worth? Looks awfully straight and rust free. Is it actually rust free? If so, that will add to its value big time. The stepsides are in demand as you probably know. I focus more on the 4x4's but I would throw a guess out that it should be worth at least $2,000 - $2,500, others will respond that are more in the know on what it is worth than me. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

10-26-2005, 10:24 AM	#5
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,029	Re: What is it worth? The guy is asking $4000.00 for it. I live in KC.Mo. it is very hard to find a rust free truck here in Mo. I would like to have this truck this truck is exactly like my very first truck when all of my troubles began I got hooked. We will see what happens is $3500 to much? __________________ DREW67

10-26-2005, 10:43 AM	#6
bigblue1968 Registered User Join Date: Oct 2005 Location: Warner Robins, Georgia Posts: 34	Re: What is it worth? not for that part of the country H3ll no, buy it or i will.

10-26-2005, 11:00 AM	#7
ACES Life is a gamble Join Date: Oct 2003 Location: Lee's Summit, MO Posts: 796	Re: What is it worth? I wouldn't pay more than $2500 for it. Mainly because of the paintjob, but also because these trucks aren't selling very well right now and I wouldn't pay top dollar for any of them. __________________ 1970 Orange CST C-10 w/350, posi, Longbed The torpid artist seeks inspiration at any cost, by virtue or by vice, by friend or by fiend, by prayer or by wine. -- Ralph Waldo Emerson

10-26-2005, 04:02 PM	#8
Rdub Registered User Join Date: Feb 2005 Location: Portland OR Posts: 74	Re: What is it worth? A 70 short stepside, I-6 sold here in Portland on ebay a couple months back for $2300. I looked at it & offered the guy a 1000. he laughed.... it was rusted through all around the bed floor, several spots in the side & end panels, rockers, cab supports & front end was tweaked on drivers side, needed new outer grille and some realignment/body work on the hood & fender.... oh, new Earl Scheib paint, new rear fenders, interior was unrestored & needed a lot of work. Couldn't believe he got that much for it... as previoulsy mentioned, seems like the short steppers are in high demand.

10-26-2005, 04:08 PM	#9
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,221	Re: What is it worth? Seems like I sold a somewhat decent 69stepside that had no motor for $800-900 2years ago. It sold the 2days after I put it in the truck trader. Maybe I low-balled it.

10-26-2005, 05:13 PM	#11
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,221	Re: What is it worth? I lived in Kansas City four years, moving from N. Oklahoma. Amazing what a "little rust there" is and a "little rust here" is. People were selling cars I wouldn't have considerd fixing. I bought a 79 firebird for the drivetrain. It ran great but was so rusty, the framerails were rusted at the leaf spring perches mounts, made the car shift, and twist so bad. My rule of thumb now is not buying cars north of Wichita.(ha, ha)

10-26-2005, 05:19 PM	#12
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,029	Re: What is it worth? This Truck is in New Mexico. __________________ DREW67

10-26-2005, 05:34 PM	#13
68shortstep Looks good at 20-ft ..... Join Date: Apr 2005 Location: Mtn Home, AR Posts: 707	Re: What is it worth? Mine had a good paint job, but it was put on over cheap-cr*p prep work. I knew at the time I'd end up having to re-do it all someday, and I still bought the truck. Tomatocity's advice seems like a good plan, to me. "Buy it, drive it, enjoy it, and don't look back." A year from now, it'll seem like you made a steal at that price. These steppers in that good condition are getting harder to find every day; most of them around here are absolutely beat-to-death farmer trucks.

10-26-2005, 07:50 PM	#14
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,044	Re: What is it worth? Andrew, ask if the truck has always been in New Mexico. Many of these south, west and southwest trucks started life all over the country and the owners moved to these areas, some after being in rustbelts. If you can trust that the description is true, I don't believe that even $4000 is a bad buy. But $4000 is absolutley at the top end of pricing for that truck in my opinion. How long has the truck been for sale? The law of economics has to apply here somewhere.

10-26-2005, 07:58 PM	#15
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: What is it worth? Andrew, I'd think $3000-$3500 wouldn't be a bad buy at all, I think it could be fixed up real easily!!!!! Nice find!!!!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-26-2005, 08:49 PM	#16
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: What is it worth? I really like it,it`s the way I like to get them.A straight solid body is the most important thing to look for in my opinion.But,I think he`s shootin`high at $4,000.I`d start off telling him you`d feel alot better if it was more in the $3,000 range.His price is to high for the driver market.The body is a great head-start on a restoration.But,mechanicals(not discs now/whatever else),interior(ripped old mat,cheap cover on seat`n`doors,horn button gone),it needs paint(that ain`t cheap),all the weatherstrip,looks like a Chevy bumper to me.It`s gonna take alot of money to cherry it out.I don`t see that alot of money`s been put in it.More of a survivor,a great start.I`d say $2,500-3,500.I doubt you`ll see this one go for less than $3,500 from this guy. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

10-26-2005, 09:03 PM	#17
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,091	Re: What is it worth? 2k tops __________________ 69 C-10, OWNED 35YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

10-26-2005, 09:16 PM	#18
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,932	Re: What is it worth? I with the $3000-3500 price. I would rather buy faded original paint than covered up bodywork. Don't forget what kind of money it will take to get the bed floor nice... __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

10-29-2005, 03:54 PM	#19
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,044	Re: What is it worth? OK Drew, what did you do?

10-29-2005, 05:14 PM	#21
larry may Senior Member Join Date: Jul 2005 Location: MISSOURI Posts: 3,256	Re: What is it worth? Drew Last One I bought is/was close to what you are showing I paid 2,400.00 for it right here in Missouri. Been scrounging parts to get it they way I want it ever since. Special- K is telling you right for where it is . Every one else is right TOO! Larry

Register or Log In To remove these advertisements.