72 Chasis Price???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

6600DURAMAX · 11-15-2005, 06:06 PM

In dire need of a cab and bed for project truck

Have a chance to buy a 72 Factory A/C cab, Bed good shape minor holes and a larger dent (no crease), cab needs rocker/corners and a little floor pan work, good fenders etc.

The guy wants $1000 which I think is a little steep or steeper thanI wnat to pay. So I started to think what I dont need I could sell to recoop some $$.

Just asking ballpark figures for complete longbed chasis with disk brake front, 12 bolt rear (open carrier), 350 that runs (autozone motor with 30,000) and a turbo 350 that is no good) could a guy get $500 or is that out of the question??

thanks guys

brownk · 11-15-2005, 06:14 PM

Definately sounds like you would have some good parts to sell afterward.

68haywagon · 11-15-2005, 08:01 PM

Just for comparison I paid $200 or 250 for a rolling 71 chasis with no motor or trans. Front discs, 3.08 posi, and a PS box. $500 doesn't sound completely out of reach if everything besides the trans is in good shape.

Mike

55chevy · 11-16-2005, 09:45 AM

I need to start hauling trucks/parts trucks up north, I found a driving 72 Camper Special with rebuilt 400 SB, air cab but they left out compressor, $1000, as well as a 72 Cheyenne air cab with no engine/tranny, $500.

11-15-2005, 06:06 PM	#1
6600DURAMAX Registered User Join Date: Nov 2000 Location: Wheatfield IN, USA Posts: 1,124	72 Chasis Price???? In dire need of a cab and bed for project truck Have a chance to buy a 72 Factory A/C cab, Bed good shape minor holes and a larger dent (no crease), cab needs rocker/corners and a little floor pan work, good fenders etc. The guy wants $1000 which I think is a little steep or steeper thanI wnat to pay. So I started to think what I dont need I could sell to recoop some $$. Just asking ballpark figures for complete longbed chasis with disk brake front, 12 bolt rear (open carrier), 350 that runs (autozone motor with 30,000) and a turbo 350 that is no good) could a guy get $500 or is that out of the question?? thanks guys __________________ 1972 K5 - LS3/408 (595Hp) -6L80e-One Tons with 4.56, 20'' Beadlocks with 37'' rubber, full TMI interior, JL Audio ..... 1971 CREWMAX Build.....at body shop for couple more years Last edited by 6600DURAMAX; 11-15-2005 at 06:11 PM.

11-15-2005, 06:14 PM	#2
brownk Registered User Join Date: Nov 2005 Location: Canada Posts: 20	Re: 72 Chasis Price???? Definately sounds like you would have some good parts to sell afterward.

11-15-2005, 08:01 PM	#3
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	Re: 72 Chasis Price???? Just for comparison I paid $200 or 250 for a rolling 71 chasis with no motor or trans. Front discs, 3.08 posi, and a PS box. $500 doesn't sound completely out of reach if everything besides the trans is in good shape. Mike __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

11-16-2005, 09:45 AM	#4
55chevy Car Truck Bike Nut Join Date: Aug 2005 Location: Suffolk Virginia Posts: 850	Re: 72 Chasis Price???? I need to start hauling trucks/parts trucks up north, I found a driving 72 Camper Special with rebuilt 400 SB, air cab but they left out compressor, $1000, as well as a 72 Cheyenne air cab with no engine/tranny, $500. __________________ Snow free Florida panhandle, don't miss Indiana winters Temp in Suffolk Virginia, Sentenced 2 to 5 years LOL 68 shortfleet project 94 3500 TD dually so many cars so little time 72 K2 CST 2WD Blazer



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.