mystery part - The 1947 - Present Chevrolet & GMC Truck Message Board Network

matthufham · 11-21-2005, 05:42 PM

ok name this for me please. it belongs on the frame or the core support, i removed it with the bumper and grill one day, left it on the shelf, and came upon it today.

chevyguy_72 · 11-21-2005, 05:44 PM

where an exhaust hanger hooked on? Just a guess

Jimbotronics · 11-21-2005, 06:14 PM

that would be my guess as well.

LUV2XCLR8 · 11-21-2005, 06:19 PM

Quote:

Originally Posted by chevyguy_72

where an exhaust hanger hooked on? Just a guess

That makes 3 of us

matthufham · 11-21-2005, 06:27 PM

hmm, i think not since it was at the front of the truck, i removed both exhaust hangers from the factory spot, and threw em away.

Sweet72 · 11-21-2005, 08:30 PM

That's without a doubt an exhaust hanger. My 72 GMC has on the frame cross member over the rear axle. It's a coil spring truck, not sure if the leaf trucks are different. There should be two indentations (for dual exhaust) to locate them on the back edge of the crossmember.

**pjmoreland** · 11-21-2005, 08:35 PM

That's definitely the upper half of an exhaust hanger that attaches to the frame crossmember that is right above the rear axle on a coil spring truck. I believe it is unique to 1972.

matthufham · 11-21-2005, 11:57 PM

above the rear axle.. hmm well this guy had welded his own hangers on the bottom of the bed, i assume he just threw this up in the front of the truck for keep-sake. i had a few brackets stuck in the front fenders and core support.

**special-K** · 11-22-2005, 08:37 AM

Were these things on the left side?Could be weight to counter-balance the battery for better cornering.j/k
I`ve seen stranger things from 30 years and 1/2 dozen owners.

matthufham · 11-22-2005, 11:02 AM

Quote:

Originally Posted by rick980

Could it be a transfer case mount?

nope, she's a 2wd

409biscayne · 11-22-2005, 11:13 AM

Quote:

Originally Posted by matthufham

above the rear axle.. hmm well this guy had welded his own hangers on the bottom of the bed, i assume he just threw this up in the front of the truck for keep-sake. i had a few brackets stuck in the front fenders and core support.

For sure thats an exhaust hanger , i just removed one on my 72 last sunday . My truck had duals and used this one on one side , and a cheap muffler shop hanger on the other . Want another one ?

matthufham · 11-22-2005, 09:32 PM

ok i found the exhaust hanger that i took off, and compared it to the "mystery part" the hanger has no welded on nuts, but they're identical other than that. i just wonder why he would store it in the front fender.. i'm tossing both hangers.

11-21-2005, 05:42 PM	#1
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	mystery part ok name this for me please. it belongs on the frame or the core support, i removed it with the bumper and grill one day, left it on the shelf, and came upon it today. Attached Images

11-21-2005, 05:44 PM	#2
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Hastings, Nebraska Posts: 956	Re: mystery part where an exhaust hanger hooked on? Just a guess

11-21-2005, 06:14 PM	#3
Jimbotronics YA YA Join Date: Aug 2004 Location: Rockledge, Fl Posts: 1,273	Re: mystery part that would be my guess as well. __________________ Jimbo '72 SWB - 350 (frame-off resto in progress - donations accepted) '04 Chevy Avalanche '03 Cadillac CTS (wife's ride) Restoration progress - http://67-72chevytrucks.com/vboard/s...d.php?t=335707

11-21-2005, 06:27 PM	#5
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: mystery part hmm, i think not since it was at the front of the truck, i removed both exhaust hangers from the factory spot, and threw em away.

11-21-2005, 08:30 PM	#6
Sweet72 Registered User Join Date: Nov 2003 Location: Alexandria, VA Posts: 1,534	Re: mystery part That's without a doubt an exhaust hanger. My 72 GMC has on the frame cross member over the rear axle. It's a coil spring truck, not sure if the leaf trucks are different. There should be two indentations (for dual exhaust) to locate them on the back edge of the crossmember. __________________ '72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction. Last edited by Sweet72; 11-21-2005 at 08:32 PM.

11-21-2005, 08:35 PM	#7
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,981	Re: mystery part That's definitely the upper half of an exhaust hanger that attaches to the frame crossmember that is right above the rear axle on a coil spring truck. I believe it is unique to 1972.

11-21-2005, 11:57 PM	#8
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: mystery part above the rear axle.. hmm well this guy had welded his own hangers on the bottom of the bed, i assume he just threw this up in the front of the truck for keep-sake. i had a few brackets stuck in the front fenders and core support.

11-22-2005, 08:37 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: mystery part Were these things on the left side?Could be weight to counter-balance the battery for better cornering.j/k I`ve seen stranger things from 30 years and 1/2 dozen owners. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-22-2005, 09:32 PM	#12
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: mystery part ok i found the exhaust hanger that i took off, and compared it to the "mystery part" the hanger has no welded on nuts, but they're identical other than that. i just wonder why he would store it in the front fender.. i'm tossing both hangers.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.