Rhino Lining Done! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 12-02-2005, 10:07 PM

I brought my truck down to the Rhino Lining today to get the colormatch. This was the third try at it. The first time they were out of the white pigment. The second time I sat there for an hour and a half before they told me they needed me to paint some extra stuff on it.

Overall I'm pleased with it. It sure is shiny. One of the things I wished I had the school do was to shave my stake pockets because I think they show up a lot more. I posted a thread last night about stake hole covers but haven't received a response yet. I'm trying to find some chrome ones.

But of course there is bad news. My dash lights wouldn't work when I left the place(after I FINALLY got them to work last night) and I blew the tail light fuse so I had no brake lights or tail lights. At least this damn thing is consistent on it's electrical crap-It's all crap!

junkyarddog1956 · 12-02-2005, 10:14 PM

Looks good ... Joe

FRENCHBLUE72 · 12-02-2005, 10:15 PM

Looks good are those taillights off a 29 or so ford??

**Palf70Step** · 12-02-2005, 11:25 PM

IT's coming togther real nice. Good luck with the wiring. I HATE wiring problems!

krue · 12-02-2005, 11:39 PM

Looks good.

**gregfull** · 12-02-2005, 11:42 PM

Looks great, I had no idea they could shoot silver liner. Are you looking for the stake hole covers that are chrome with a hidden hook which pivots out when you need them? Or are you looking for a smooth cover for the holes?

5150 · 12-03-2005, 01:48 AM

I'm looking for some smooth chrome ones if at all possible. I'd rather go without if I have to go with the ones with the hook.

**Hart_Rod** · 12-03-2005, 08:54 AM

Y69,

I believe JC Whitney has those covers. I would probably just ask the body shop to weld them in and repaint the tops of the bedside, they could do it in a couple of days. Also, it would probably be worth the effort to pull your rear fenders and have them linered. Since there is no inner fender, this will provide you protection from rocks. I did the underneath of all my fenders (cab and bed also) on my 1948, almost 10K miles and no stars in fenders.

Rob

GMan69 · 12-03-2005, 08:58 AM

Looks good, Bryan!

Bill72BB · 12-03-2005, 11:56 AM

That looks real clean.

chevyboy55 · 12-03-2005, 02:27 PM

Looks nice!

3qtrtontarrer · 12-04-2005, 07:37 AM

looks sweet. im having it done to the underside of my cab and bed.hoping to prevent rust.4 season daily driver

red71cheyenne · 12-04-2005, 07:45 PM

Thats nice! Did you get the gas guage problem figured out?

LUV2XCLR8 · 12-04-2005, 07:48 PM

Nice, glad to see it almost finished, now I just gotta see it in person

A few 72's · 12-05-2005, 11:24 AM

Looks better every time you post, can not wait to see it...
May look at Auto zone, they have the polished SS ones that the hooks recess to give a smooth look when not in use.

alf1096 · 12-05-2005, 03:00 PM

Did you have a wood floor in the truck to start with??

5150 · 12-05-2005, 03:25 PM

Thanks for all the kind words. I might look into the herculiner for the underside of the rear fenders.

Still no fuel gauge. Giving up for a few weeks. Probably for the winter. I say that and I'll get an itch next week and start fooling with it again.

Originally it was a wood bed, well it was a plywood bed when I got it. Had a guy here in town cut me a piece of steel and since only 1 of my cross sills were left he had the machine cut and measure the holes for some more that he made for me.

It will be in Maggie Valley, probably with the fuel gauge still not working.

**Yukon Jack** · 12-05-2005, 03:35 PM

Looking great!

12-02-2005, 10:07 PM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Rhino Lining Done! I brought my truck down to the Rhino Lining today to get the colormatch. This was the third try at it. The first time they were out of the white pigment. The second time I sat there for an hour and a half before they told me they needed me to paint some extra stuff on it. Overall I'm pleased with it. It sure is shiny. One of the things I wished I had the school do was to shave my stake pockets because I think they show up a lot more. I posted a thread last night about stake hole covers but haven't received a response yet. I'm trying to find some chrome ones. But of course there is bad news. My dash lights wouldn't work when I left the place(after I FINALLY got them to work last night) and I blew the tail light fuse so I had no brake lights or tail lights. At least this damn thing is consistent on it's electrical crap-It's all crap! Attached Images __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4 Last edited by 5150; 12-02-2005 at 10:08 PM.

12-02-2005, 10:14 PM	#2
junkyarddog1956 Registered User Join Date: Sep 2003 Location: Thorntown , Indiana Posts: 231	Re: Rhino Lining Done! Looks good ... Joe __________________ 69 Chev C-10 ... painted and ready to reassemble ( for sale ) 82 Custom Deluxe ( have parts to restore )

12-02-2005, 10:15 PM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Rhino Lining Done! Looks good are those taillights off a 29 or so ford?? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-02-2005, 11:25 PM	#4
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,249	Re: Rhino Lining Done! IT's coming togther real nice. Good luck with the wiring. I HATE wiring problems! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

12-02-2005, 11:39 PM	#5
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: Rhino Lining Done! Looks good. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

12-02-2005, 11:42 PM	#6
gregfull Registered User Join Date: Jan 2004 Location: Richmond, Texas Posts: 599	Re: Rhino Lining Done! Looks great, I had no idea they could shoot silver liner. Are you looking for the stake hole covers that are chrome with a hidden hook which pivots out when you need them? Or are you looking for a smooth cover for the holes? __________________ My Suburban Project 72 Suburban 68 SWB 57 Belair 55 Cameo 06 Chevy 1/2 ton crew 09 Suburban

12-03-2005, 01:48 AM	#7
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Rhino Lining Done! I'm looking for some smooth chrome ones if at all possible. I'd rather go without if I have to go with the ones with the hook. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

12-03-2005, 08:54 AM	#8
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Rhino Lining Done! Y69, I believe JC Whitney has those covers. I would probably just ask the body shop to weld them in and repaint the tops of the bedside, they could do it in a couple of days. Also, it would probably be worth the effort to pull your rear fenders and have them linered. Since there is no inner fender, this will provide you protection from rocks. I did the underneath of all my fenders (cab and bed also) on my 1948, almost 10K miles and no stars in fenders. Rob Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 12-04-2005 at 09:01 AM.

12-03-2005, 08:58 AM	#9
GMan69 Registered User Join Date: Mar 2001 Location: Hernando, MS USA Posts: 1,152	Re: Rhino Lining Done! Looks good, Bryan! __________________ George Morgan Hernando, MS '69 C-10 swb fleetside '72 GMC swb Stepside

12-03-2005, 11:56 AM	#10
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,979	Re: Rhino Lining Done! That looks real clean. __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

12-03-2005, 02:27 PM	#11
chevyboy55 Senior Member Join Date: Aug 2004 Location: Kelso,Wa Posts: 3,637	Re: Rhino Lining Done! Looks nice!

12-04-2005, 07:37 AM	#12
3qtrtontarrer Registered User Join Date: Oct 2005 Location: NH Posts: 93	Re: Rhino Lining Done! looks sweet. im having it done to the underside of my cab and bed.hoping to prevent rust.4 season daily driver

12-04-2005, 07:45 PM	#13
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: Rhino Lining Done! Thats nice! Did you get the gas guage problem figured out? __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

12-04-2005, 07:48 PM	#14
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Rhino Lining Done! Nice, glad to see it almost finished, now I just gotta see it in person __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

12-05-2005, 11:24 AM	#15
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 703	Re: Rhino Lining Done! Looks better every time you post, can not wait to see it... May look at Auto zone, they have the polished SS ones that the hooks recess to give a smooth look when not in use. __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s



Register or Log In To remove these advertisements.

12-05-2005, 03:00 PM	#16
alf1096 Registered User Join Date: Aug 2005 Location: Texas Posts: 124	Re: Rhino Lining Done! Did you have a wood floor in the truck to start with?? __________________ 1970 Short Stepside----Process of Restoring 1983 1/2 Silverado

12-05-2005, 03:25 PM	#17
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Rhino Lining Done! Thanks for all the kind words. I might look into the herculiner for the underside of the rear fenders. Still no fuel gauge. Giving up for a few weeks. Probably for the winter. I say that and I'll get an itch next week and start fooling with it again. Originally it was a wood bed, well it was a plywood bed when I got it. Had a guy here in town cut me a piece of steel and since only 1 of my cross sills were left he had the machine cut and measure the holes for some more that he made for me. It will be in Maggie Valley, probably with the fuel gauge still not working. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4 Last edited by 5150; 12-05-2005 at 05:09 PM.

12-05-2005, 03:35 PM	#18
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Rhino Lining Done! Looking great! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

Register or Log In To remove these advertisements.