What did you get done?

[N2TRUX]

I didn't do anything usefull this week. When I wasn't sick I was sleeping trying to get rid of this cold/flu/crap I got. I did go to me daughter's first volleyball tournament yesterday. Her team went undefeated all day until the finals and placed second.....


What did you get done?

[canadian trucker]

well i finally got my gauges and switches for my air ride figured out was not easy but i got it

here is my old ashtray


here is the gauge/switch holder which i had


the new one i build


some cutting of the ashtry


and the final product


and thats all i got done

[TrainD5115]

Worked on my oldest daughter's Grand Am on Saturday. Put in a new window regulator. No truck stuff this weekend but a carb rebuild is in the works.

[phantom dually]

Nothing productive!!! I feel like I wasted a good weekend!!

[Grande Rojo]

Originally Posted by phantom dually

Nothing productive!!! I feel like I wasted a good weekend!!

I did the same thing

[bigblock73]

Well, me and the wife bought a kitten (named Deuce), celebrated my birthday (32) with our family, bought a few truck parts, and started doing some wood/trimwork on the house.

[Eyegore]

Well N@TRUX I've had that blasted flu all week, right now were trying to finish up with new bushings on the front of the 80.

[82c10]

went on a 6 hour round trip to look at this car, i am thinking about getting this car real hard. here is some pics


tell me what you think about it

[bagged74]

I sold the 85 today, I got an offer from a guy in Houston, so I met him in Dallas to deliver it. So I figured sice I was in the area I might as well pick up a 72 2wd blazerthat a board member had for sale. Thanks John (jxdxwx)

So I pretty much spent alot of my weekend on the road.

[82c10]

Originally Posted by bagged74

I sold the 85 today, I got an offer from a guy in Houston, so I met him in Dallas to deliver it. So I figured sice I was in the area I might as well pick up a 72 2wd blazerthat a board member had for sale. Thanks John (jxdxwx)

So I pretty much spent alot of my weekend on the road.

it still says for sale in your signature

[f.monroe]

I spent my weekend doing things for the wife . During the week we went to get a new mattress since ours is horribly uncomfortable. I walked out of the furniture stores with receipts for not only the mattress , but also a new matching leather couch, love seat , chair and ottoman . I spent the weekend picking this furniture up , placing it several times in different spots in the living room , etc. I also made a couple trips hauling the old couch , recliner ,etc to some of the student workers that work with my wife . They appreciated it since what they were using for a couch was fun to look at . In between , We found time to take the boys to two different birthday parties and attended the church Christmas party , rode the four wheelers with my boys Saturday(reward for good behavior in school) , and played a little football in the yard . Thats about it . Frank

[Russell]

Finished rebuilding my SM465, then blew up my 700r4, lol

[AspecialZ]

Originally Posted by 82c10

went on a 6 hour round trip to look at this car, i am thinking about getting this car real hard. here is some pics



tell me what you think about it

dash leaves some to be desired, and the exhaust needs fixed immediately! Otherwise, nice looking..i like the wheels mullets rule

[84 400]

went to the junk yard and got front lock outs for my freinds 97 amigo. he has lifted it and is running 32 we go wheeling like 3 days a week. installede the cb in the 84 and drove the 85 in the snow and had a blast spinning all over and ripping doughnuts. worked on my tmaxx and recharged the 84's battery after sitting for 5 weeks cause it is a good weather truck. Also bought a air intake for my buddies 03 taurus ses and fixed his dents. got a drive shaft for my other buddies jeep cause we are lifting it 8 inches it is a 97 cherrekee. other wise i am preparing to get the 85 re inspected for the emissioins failure do to the eger not being on the 305.

[84 400]

go for that z28 what is he asjking any way ??

[1987 Shortwide]

Only stuff truck related was that I smeared some filler on my firewall and powerwashed the grease off my A-arms.

On the wagon:
Flushed the cooling system and heater core for winter prep
Installed the original bench seat after restoring it
washed it and detailed the engine bay
slapped a set of impy SS wheels on her

Sunday I met with a group for our first meet to get rounded up into a B-body club. then went shopping with the fiance.

[bigarmzz]

i worked 32 hours like i do every freakin weekend

[Izzy]

Replaced the 20+ year old hot water heater that apparently has been leaking since atleast June. Luckily it's pier and beam so the house didn't get destroyed but it has soaked the ground under the house and made several spots drop. Now comes the fun of dropping several $Grand$ to have the foundation repaired.

[Prerunner1982]

put up christmas lights.. and worked 13hrs like usual...

[86 GMG]

well its been busy friday night had some friends over to eat dinner and my wife cut my two buddys hair she does it for a living sat i installed a rear-end in a 94 jeep cherokee and hauled it about 20 mile past the other side of town sunday i hauled two and half ricks of wood to my house other than gas and time it cost me 40.00 got home and unloaded with brother in-law after unloading i pulled the water pump off his 01 dodge and cleaned most everything up to reinstall the new one tonight oh yeah had to clean the garage up to git the dodge out of the wind and cold weather other than that i havent done a darn thing on the 86 swb. friday afternoon before the weekend started i tore apart my dash on the 84 dd trying to fix the darn heater its gitting cold know hopefully i can get it fixed sooooooon

[bad_burb]

I worked, that's it. On a good note, Sunday was time and a half.

[82c10]

Originally Posted by AspecialZ

dash leaves some to be desired, and the exhaust needs fixed immediately! Otherwise, nice looking..i like the wheels mullets rule

i planned on getting new exhaust for it, he said he just put that on temporarily so he could drive it around, here is some specs on the motor and some other stuff

Specs:
350ci 380hp 400ft/lbs torque-(guess)
-Keith black hypereutectic pistons
-10.1 compression ratio
-edelbrock performer rpm intake
-holley 750cfm carb
-comp cams magnum roller rockers
-comp cams 280H magnum cam
-hedman headers
-griffin nascar style radiator w/two rows of 1 1/4 tubing instead of the 1" tubing
-vacuum canister for the power brakes
-World product sportsman II heads
-Summit racing TH400 tranny w/larger capacity finned cast aluminum tranny pan
-B&M holeshot 3000 stall converter
-Rebuilt rearend w/auburn limited slip diff. and 3.73 gears, new
axles
-B&M shifter
-new gauges
-optima red top battery
-spohn adjustable torque arm with dual drive shaft loops and spohn tranny crossmember
-2" cowl induction fiberglass hood w/hood pins

as for the price, i am not going to say, i am probably going to buy the car, build another motor for the truck(for towing) and while i am driving the car rebuild and stick the motor in the the truck and get it running good , and make the camaro a cruiser/drag strip car, and then sale it

[Captkaos]

Hmm, I did some truck related stuff this weekend. I picked up this for some parts I needed (front clip, front doors, seats, engine/trans) so I can quickly put a truck together to have a rolling advertisement for my company. I drove it home Saturday.

I plan to get it running right and then pull it apart. It has a ton of features: Barn doors, third seat, rear A/C, etc.

[vern350]

i just bought an 1986 irocz camaro fully loaded 2 weeks ago with TPI. There nice cars. That one looks nice, I would go for it. Whats the mileage on it, if you can find out?(not on the motor)

[82c10]

haven't asked around 10 k on motor, 4.5k on tranny&rearend, but don't know about the body, the front suspension was rebuilt about 2 1/2 years ago