Dropped! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**SOON2BLAZE** · 12-20-2005, 11:40 PM

finally got the blazer drop finished. 4/6 ECE drop with POL upper a arms, drilled/slotted rotors, new callipers/pads, all new steering and b joints except the drag link. Added a sway bar and even though it's a factory 1 1/6, it's a huge improvement. Lowering the center of gravity kicks azz. Has any one else done their blazer drop and not used a c notch? Thinking: maybe a notch would be sweet, and insted of 4/6 I should have gone 5/7 or 6/8. Did some one say lowering is addictive?

before and after

71swb4x4 · 12-20-2005, 11:43 PM

Looks good! You can always go lower

bouncytruck · 12-20-2005, 11:50 PM

Looks nice with the 4/6. Eventually, you'll probably end up baggin it!

Pop's72 · 12-21-2005, 03:13 AM

That looks tight!!

How hard/easy was the ECE kit to install?

hotrodhomi · 12-21-2005, 11:16 AM

looks b1tchen

blazerparts · 12-21-2005, 11:36 AM

cool

**raggedjim** · 12-21-2005, 01:03 PM

Mine has a 4/6 with no c-notch. haven't bottomed it out yet.

Yous looks great, Rg

**Yukon Jack** · 12-21-2005, 01:03 PM

Lookin' sweet!

**lolife99** · 12-21-2005, 08:54 PM

SOON2BLAZE,... the rear will go up a little when you remove the top. Mine rear axle is about an inch away from the frame, now with the top on. I am planning on a bolt in notch with a "modified" bracket for the Super Track Bar. I did a 4.5/6 drop and would like the front a little lower. Mine is about level,... but I would rather have a little rake. I am sure I am headed towards bagging it. I just don't want the air ride stuff inside. (tank, compressor, etc.) By the way,...your blazer looks SWEET!

**lolife99** · 12-21-2005, 08:59 PM

My Avatar pic,...

**FRENCHBLUE72** · 12-21-2005, 10:10 PM

Looks great I am sure it is only a matter of time before the crossmember is hitting the ground to get it lower..

LUV2XCLR8 · 12-21-2005, 11:58 PM

bouncytruck · 12-22-2005, 12:50 PM

Man, now I want a 2wd Blazer even more!

LUV2XCLR8 · 12-22-2005, 12:54 PM

Quote:

Originally Posted by bouncytruck

Man, now I want a 2wd Blazer even more!

I finally got one, just no money to spend on it

Blue4x4 · 12-22-2005, 09:13 PM

looks great.

Scrubby · 12-22-2005, 10:11 PM

Got to love dropped blazers. Very nice!

bouncytruck · 12-23-2005, 01:00 AM

Quote:

Originally Posted by LUV2XCLR8

I finally got one, just no money to spend on it

That's ok, I'm still living vicariously through you.

Maybe next year I can start my search. Oh wait, we're having another baby! Hmm, I guess it will have to wait a few more years!

krue · 12-23-2005, 02:16 AM

Looks good.

**SOON2BLAZE** · 12-24-2005, 03:00 PM

lolife99 what size rims / tires are you using? back spacing? Yours looks sweet! Bouncytruck, my new son has killed any truck $ for now (The day I brought him home IN THE BLAZER! Avitar pic) so I know how that goes. Hope to find a half cab some day and get a tonneau cover. TPI this spring!

**lolife99** · 12-24-2005, 04:42 PM

SOON2BLAZE,... The rims are Eagle 212's. 17x8 front, (5inch BS) and 17x9.5 rear, (4.5 inch BS). The tires are Nitto brand, 255/50-17 and 275/50-17. I would rather have an 18/20 combo,... but this will have to do for now. you ust have to remember that the front "track width" on these trucks is wider that the rear track width,... and order accordingly. Post up some more pics of yours when you get a chance. Also what are the POL upper arms? Do you have any pics of them? Again,... nice Blazer. If you ever repaint it,... I would leave it the same color!

krue · 12-24-2005, 05:40 PM

That looks good, but I wouldn't be able to drive it around here.

smbrouss70 · 12-24-2005, 10:14 PM

Quote:

Originally Posted by lolife99

Also what are the POL upper arms? Do you have any pics of them?

I believe that he is talking about Performance Online upper arms.

stingray72 · 12-26-2005, 06:15 PM

I've got a 4/6 on mine... Love it! Saving up for some 20's now and then bag it later hopefully.

Your truck looks great!

**Canadian694x4** · 12-26-2005, 08:19 PM

Looks Great!!

12-20-2005, 11:40 PM	#1
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	Dropped! finally got the blazer drop finished. 4/6 ECE drop with POL upper a arms, drilled/slotted rotors, new callipers/pads, all new steering and b joints except the drag link. Added a sway bar and even though it's a factory 1 1/6, it's a huge improvement. Lowering the center of gravity kicks azz. Has any one else done their blazer drop and not used a c notch? Thinking: maybe a notch would be sweet, and insted of 4/6 I should have gone 5/7 or 6/8. Did some one say lowering is addictive? before and after Attached Images

12-20-2005, 11:43 PM	#2
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Dropped! Looks good! You can always go lower __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

12-20-2005, 11:50 PM	#3
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Re: Dropped! Looks nice with the 4/6. Eventually, you'll probably end up baggin it! __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

12-21-2005, 03:13 AM	#4
Pop's72 It's ok to stare... Join Date: Dec 2004 Location: San Jose, CA Posts: 669	Re: Dropped! That looks tight!! How hard/easy was the ECE kit to install? __________________ -Matt 1971 Blazer/Jimmy : Factory 2WD, Factory AC, Crate 350

12-21-2005, 11:16 AM	#5
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: Dropped! looks b1tchen __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

12-21-2005, 11:36 AM	#6
blazerparts No,I DON'T have Tourett's Join Date: Mar 2005 Location: Reno, NV Posts: 556	Re: Dropped! cool __________________ '72 K5 CST 350/350 Daily Driver '69 GMC3500 Camper Special CST Flatbed 396/400 Upgraded to show truck '69 GMC 2500 L6292, 3spd beater

12-21-2005, 01:03 PM	#7
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,457	Re: Dropped! Mine has a 4/6 with no c-notch. haven't bottomed it out yet. Yous looks great, Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Last edited by raggedjim; 10-21-2009 at 03:35 PM.

12-21-2005, 01:03 PM	#8
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: Dropped! Lookin' sweet! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

12-21-2005, 08:54 PM	#9
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,692	Re: Dropped! SOON2BLAZE,... the rear will go up a little when you remove the top. Mine rear axle is about an inch away from the frame, now with the top on. I am planning on a bolt in notch with a "modified" bracket for the Super Track Bar. I did a 4.5/6 drop and would like the front a little lower. Mine is about level,... but I would rather have a little rake. I am sure I am headed towards bagging it. I just don't want the air ride stuff inside. (tank, compressor, etc.) By the way,...your blazer looks SWEET! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-21-2005, 08:59 PM	#10
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,692	Re: Dropped! My Avatar pic,... Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-21-2005, 10:10 PM	#11
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,601	Re: Dropped! Looks great I am sure it is only a matter of time before the crossmember is hitting the ground to get it lower.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-21-2005, 11:58 PM	#12
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: Dropped! __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

12-22-2005, 12:50 PM	#13
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Re: Dropped! Man, now I want a 2wd Blazer even more! __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

12-22-2005, 09:13 PM	#15
Blue4x4 Senior Member Join Date: Mar 2003 Location: Sparks, NV Posts: 790	Re: Dropped! looks great.

12-22-2005, 10:11 PM	#16
Scrubby Check out GMTrucks.org Join Date: Sep 2003 Location: Boise, Id Posts: 284	Re: Dropped! Got to love dropped blazers. Very nice!



Register or Log In To remove these advertisements.

12-23-2005, 02:16 AM	#18
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: Dropped! Looks good. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

12-24-2005, 03:00 PM	#19
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	Re: Dropped! lolife99 what size rims / tires are you using? back spacing? Yours looks sweet! Bouncytruck, my new son has killed any truck $ for now (The day I brought him home IN THE BLAZER! Avitar pic) so I know how that goes. Hope to find a half cab some day and get a tonneau cover. TPI this spring!

12-24-2005, 04:42 PM	#20
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,692	Re: Dropped! SOON2BLAZE,... The rims are Eagle 212's. 17x8 front, (5inch BS) and 17x9.5 rear, (4.5 inch BS). The tires are Nitto brand, 255/50-17 and 275/50-17. I would rather have an 18/20 combo,... but this will have to do for now. you ust have to remember that the front "track width" on these trucks is wider that the rear track width,... and order accordingly. Post up some more pics of yours when you get a chance. Also what are the POL upper arms? Do you have any pics of them? Again,... nice Blazer. If you ever repaint it,... I would leave it the same color! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-24-2005, 05:40 PM	#21
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: Dropped! That looks good, but I wouldn't be able to drive it around here. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

12-26-2005, 06:15 PM	#23
stingray72 Red Headed Step Child Join Date: Oct 2003 Location: Atlanta, GA Posts: 1,216	Re: Dropped! I've got a 4/6 on mine... Love it! Saving up for some 20's now and then bag it later hopefully. Your truck looks great! __________________ "Dinner, the perfect break between work and drunk" -Homer Simpson

12-26-2005, 08:19 PM	#24
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,306	Re: Dropped! Looks Great!! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

Register or Log In To remove these advertisements.