Heater core removal help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C&C Chevy · 12-22-2005, 02:16 PM

I'm trying to take the heater box thing out so I can replace the heater core. I see the one bolt on the far right on the box from inside the cab. How do I get to the other ones? Engine bay? Were at? HELP!!

also I have A/C..

apstguy · 12-22-2005, 03:21 PM

See here: http://www.coloradok5.com/heatercore.shtml

Prerunner1982 · 12-22-2005, 07:54 PM

i put an extention on my ratchet and could get them all.. i thought i had another one but i didnt, was just a bit tricky to weasel it out.. about as much fun as getting it back in. i didnt have to drop my inner fender or anything.. just take your time.. infact if you want you can bring it up here and i will help ya.

C&C Chevy · 12-22-2005, 08:24 PM

I just got done. Had to stop for awhile to get the kids from school. I went ahead and dropped the inner fender. The only big problem I had was taking the heater box apart. Had all the little bolts out, and the back still wouldn't come off. Finally figured out I had to take the flapper rod out to get them apart.

Went ahead and put a new blower in too. The other one had just started to squeal. Have to wait till tomorrow to try it out cause I ran out of daylight.

Still some interior bits to finish up.

Thanks for the offer Jon. Definitely next time!

12-22-2005, 02:16 PM	#1
C&C Chevy Registered User Join Date: Feb 2003 Location: Midwest City, OK Posts: 1,001	Heater core removal help I'm trying to take the heater box thing out so I can replace the heater core. I see the one bolt on the far right on the box from inside the cab. How do I get to the other ones? Engine bay? Were at? HELP!! also I have A/C.. __________________ Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007 Last edited by C&C Chevy; 12-22-2005 at 02:18 PM.

12-22-2005, 03:21 PM	#2
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,088	Re: Heater core removal help See here: http://www.coloradok5.com/heatercore.shtml __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32 Last edited by apstguy; 12-22-2005 at 03:22 PM.

12-22-2005, 07:54 PM	#3
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,906	Re: Heater core removal help i put an extention on my ratchet and could get them all.. i thought i had another one but i didnt, was just a bit tricky to weasel it out.. about as much fun as getting it back in. i didnt have to drop my inner fender or anything.. just take your time.. infact if you want you can bring it up here and i will help ya. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call Last edited by Prerunner1982; 12-22-2005 at 07:55 PM.

12-22-2005, 08:24 PM	#4
C&C Chevy Registered User Join Date: Feb 2003 Location: Midwest City, OK Posts: 1,001	Re: Heater core removal help I just got done. Had to stop for awhile to get the kids from school. I went ahead and dropped the inner fender. The only big problem I had was taking the heater box apart. Had all the little bolts out, and the back still wouldn't come off. Finally figured out I had to take the flapper rod out to get them apart. Went ahead and put a new blower in too. The other one had just started to squeal. Have to wait till tomorrow to try it out cause I ran out of daylight. Still some interior bits to finish up. Thanks for the offer Jon. Definitely next time! __________________ Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.