Front brake caliper compatibility - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Stout72 · 03-21-2002, 11:46 AM

I may have to replace my left front caliper due to a busted bleeder screw. Does anybody know which years front calipers are compatible with a '72 K20? Might widen the field of availability.

------------------
72 Chevy K20 LWB, 350/350, lifted, dual shock suspension F&R.
AKA The Beast. Daily driver, even though it's a work in progress.

*Fast68Chevy* · 03-21-2002, 12:13 PM

it all depend son if your hose end at the caliper end of hose will fit on 73-up calipers or not.. you never know,, all you have to do is physically compare at the parts counter, let us know what you find out,.. also measure inside width of caliper and mounting slider bolts separation distances too to make sure.

good luck

------------------
-71/C-10(thx teeitup and crews!)350 4+4/CH465(thx 71Chev, GMCPaul, and CPNE)longfleet bed(thnx meathead95)!still building it-
-'84 Z28(Z28) 1G1AP87GXEL100000 with H.O. 305/4bbl/190net/hp(L69) 3.73 rear(GT4/YC4) 700R4(MD8-MXO) & other goodies

-79 G20 pass van, 350/th350/10bolt,
paint is overrated
Randy- Lincoln, IL
randy@ccaonline.com
© RSS Enterprises 2000

JJR · 03-21-2002, 01:53 PM

According to Hollanders you can use the following for your 72 K-20:
BLAZER/JIMMY (full size) 71-78 Front; 4x4
CHEVROLET PICKUP TRUCK 71-78 Front, 10 Series; 4x4
CHEVROLET PICKUP TRUCK 71-78 Front, 20 Series; 4x4
GMC PICKUP TRUCK 71-78 Front, 1500 Series; 4x4
GMC PICKUP TRUCK 71-78 Front, 2500 Series; 4x4
PONTIAC 69-70 Front
SUBURBAN 71-78 Front, 10 Series; 4x4
SUBURBAN 71-78 Front, 1500 Series; 4x4
SUBURBAN 71-78 Front, 20 Series; 4x4
SUBURBAN 71-78 Front, 2500 Series; 4x4
GM Part# GM Cost
18004915 R. $195 obs
18004914 L. $175 obs

[This message has been edited by JJR (edited March 21, 2002).]

Stout72 · 03-21-2002, 04:11 PM

Thanks, JJR. I'll have to get one of those. Manual IV?

------------------
72 Chevy K20 LWB, 350/350, lifted, dual shock suspension F&R.
AKA The Beast. Daily driver, even though it's a work in progress.

*Fast68Chevy* · 03-21-2002, 04:15 PM

calipers same between 1/2 and 3/4 ? hmm interesting, pontiac 69 and 70 same ? odd,.. i have a pair off 72 blazer front im savign away

i hear they can be used for rear disc conversion, hollanders manuals are too damned hard to get a hold of, those who have are damned lucky... theyre impossible to get, i swear,..
------------------
-71/C-10(thx teeitup and crews!)350 4+4/CH465(thx 71Chev, GMCPaul, and CPNE)longfleet bed(thnx meathead95)!still building it-
-'84 Z28(Z28) 1G1AP87GXEL100000 with H.O. 305/4bbl/190net/hp(L69) 3.73 rear(GT4/YC4) 700R4(MD8-MXO) & other goodies

-79 G20 pass van, 350/th350/10bolt,
paint is overrated
Randy- Lincoln, IL

r68c30@hotmail.com
© RSS Enterprises 2000
]

[This message has been edited by Fast68Chevy (edited March 21, 2002).]

Stout72 · 03-22-2002, 10:59 AM

Check Hollander website. Looks like they sell them online for $99

------------------
72 Chevy K20 LWB, 350/350, lifted, dual shock suspension F&R.
AKA The Beast. Daily driver, even though it's a work in progress.

03-21-2002, 11:46 AM	#1
Stout72 Not my good side. Join Date: Mar 2002 Location: Fairfield, California Posts: 222	Front brake caliper compatibility I may have to replace my left front caliper due to a busted bleeder screw. Does anybody know which years front calipers are compatible with a '72 K20? Might widen the field of availability. ------------------ 72 Chevy K20 LWB, 350/350, lifted, dual shock suspension F&R. AKA The Beast. Daily driver, even though it's a work in progress. __________________ 72 Chevy K20 Custom Camper, 350/350, 4" lift, dual shock suspension front & rear. Daily driver and a work in progress. 00 Suburban LT 90 Camaro RS 79 Yamaha XS1100 Special (Ol' Reliable)

03-21-2002, 01:53 PM	#3
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	According to Hollanders you can use the following for your 72 K-20: BLAZER/JIMMY (full size) 71-78 Front; 4x4 CHEVROLET PICKUP TRUCK 71-78 Front, 10 Series; 4x4 CHEVROLET PICKUP TRUCK 71-78 Front, 20 Series; 4x4 GMC PICKUP TRUCK 71-78 Front, 1500 Series; 4x4 GMC PICKUP TRUCK 71-78 Front, 2500 Series; 4x4 PONTIAC 69-70 Front SUBURBAN 71-78 Front, 10 Series; 4x4 SUBURBAN 71-78 Front, 1500 Series; 4x4 SUBURBAN 71-78 Front, 20 Series; 4x4 SUBURBAN 71-78 Front, 2500 Series; 4x4 GM Part# GM Cost 18004915 R. $195 obs 18004914 L. $175 obs [This message has been edited by JJR (edited March 21, 2002).] __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed

03-21-2002, 04:11 PM	#4
Stout72 Not my good side. Join Date: Mar 2002 Location: Fairfield, California Posts: 222	Thanks, JJR. I'll have to get one of those. Manual IV? ------------------ 72 Chevy K20 LWB, 350/350, lifted, dual shock suspension F&R. AKA The Beast. Daily driver, even though it's a work in progress. __________________ 72 Chevy K20 Custom Camper, 350/350, 4" lift, dual shock suspension front & rear. Daily driver and a work in progress. 00 Suburban LT 90 Camaro RS 79 Yamaha XS1100 Special (Ol' Reliable)

03-22-2002, 10:59 AM	#6
Stout72 Not my good side. Join Date: Mar 2002 Location: Fairfield, California Posts: 222	Check Hollander website. Looks like they sell them online for $99 ------------------ 72 Chevy K20 LWB, 350/350, lifted, dual shock suspension F&R. AKA The Beast. Daily driver, even though it's a work in progress. __________________ 72 Chevy K20 Custom Camper, 350/350, 4" lift, dual shock suspension front & rear. Daily driver and a work in progress. 00 Suburban LT 90 Camaro RS 79 Yamaha XS1100 Special (Ol' Reliable)

03-21-2002, 12:13 PM	#2
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	it all depend son if your hose end at the caliper end of hose will fit on 73-up calipers or not.. you never know,, all you have to do is physically compare at the parts counter, let us know what you find out,.. also measure inside width of caliper and mounting slider bolts separation distances too to make sure. good luck ------------------ -71/C-10(thx teeitup and crews!)350 4+4/CH465(thx 71Chev, GMCPaul, and CPNE)longfleet bed(thnx meathead95)!still building it- -'84 Z28(Z28) 1G1AP87GXEL100000 with H.O. 305/4bbl/190net/hp(L69) 3.73 rear(GT4/YC4) 700R4(MD8-MXO) & other goodies -79 G20 pass van, 350/th350/10bolt, paint is overrated Randy- Lincoln, IL randy@ccaonline.com © RSS Enterprises 2000

03-21-2002, 04:15 PM	#5
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	calipers same between 1/2 and 3/4 ? hmm interesting, pontiac 69 and 70 same ? odd,.. i have a pair off 72 blazer front im savign away i hear they can be used for rear disc conversion, hollanders manuals are too damned hard to get a hold of, those who have are damned lucky... theyre impossible to get, i swear,.. ------------------ -71/C-10(thx teeitup and crews!)350 4+4/CH465(thx 71Chev, GMCPaul, and CPNE)longfleet bed(thnx meathead95)!still building it- -'84 Z28(Z28) 1G1AP87GXEL100000 with H.O. 305/4bbl/190net/hp(L69) 3.73 rear(GT4/YC4) 700R4(MD8-MXO) & other goodies -79 G20 pass van, 350/th350/10bolt, paint is overrated Randy- Lincoln, IL r68c30@hotmail.com © RSS Enterprises 2000 ] [This message has been edited by Fast68Chevy (edited March 21, 2002).]



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.