350 SBC For Sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ole Blue 68 · 01-30-2006, 12:23 AM

Anybody in the Houston area looking for an engine? I've got a 350 that might be available. This would be for a nearly complete engine; oil pan to intake.

I don't know the mileage and haven't pulled the heads yet but I know it needs a new oil pan gasket, new rings and the heads probably need a trip to the machine shop. Other than that, it seems to be in pretty good shape and ran fine.

Looking to get $250.

John

69TowRig · 01-30-2006, 02:56 AM

Hmm, tempting. Is it a 4-bolt main? I was saving up for a crate engine but a solid running 350 instead of my worn out, badly leaking, bad comp in #4 307 would be good, especially for low $$$.

Where did it come from? Did you get to drive it? Is anything aftermarket on it or is it pretty much stock?

Ole Blue 68 · 01-30-2006, 10:03 AM

It came with the truck I bought back in the summer but I don't know much about it. It ran pretty good for the past 5 months other than the things I listed on the first post. Bone stock, OE exhaust manifolds, most likely a 2 bolt main, but it does have a Q-jet 4 barrel intake.

When I bought the truck, the previous owner told me it was a 283. For some reason, I believed him and never looked into it more. I figured rather than rebuild it, I would swap it with a rebuilt 350 which is exactly what I did. So imagine my surprise the other night when, after the engine was already out, I ran the casting number (3970014) and it came up as a 350. I could have kicked myself. Anyways, that's why I pulled it. Had I looked and realized what it was, I never would have swapped it out.

69TowRig · 01-30-2006, 06:17 PM

Man, sorry to get all excited about it. I really need to NOT get an engine for the K5 right now, I have to move to NC in 3 weeks. Plus I am still stuck on the idea of a crate engine.

Sounds like someone else will be getting a pretty good deal though.

Ole Blue 68 · 01-31-2006, 12:05 AM

Save for the crate and good luck in NC.

Ole Blue 68 · 02-01-2006, 10:18 AM

ttt

Luvlegs · 02-01-2006, 10:39 AM

Ole Blue, what part of NC?

Ole Blue 68 · 02-01-2006, 01:26 PM

Hey Luvlegs,

I'm in Houston. 69TowRig is moving to NC.

John

Luvlegs · 02-01-2006, 01:31 PM

DOH! OK, - 69TowRig - what part of NC? hahahah (and it's only Tues....Wednesday! yeah that's it...wednesday...) I'll PM him and get outta the parts stuff here.

Ole Blue 68 · 02-01-2006, 01:39 PM

I know the feeling..

Rally Nova · 02-01-2006, 05:55 PM

Can you post a picture of it?

Ole Blue 68 · 02-01-2006, 06:02 PM

Yeah, I know pics would help. I'll have some posted by this weekend.

I can tell you this, it's the most beautiful color in the world: Chevy Orange...

01-30-2006, 12:23 AM	#1
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	350 SBC For Sale Anybody in the Houston area looking for an engine? I've got a 350 that might be available. This would be for a nearly complete engine; oil pan to intake. I don't know the mileage and haven't pulled the heads yet but I know it needs a new oil pan gasket, new rings and the heads probably need a trip to the machine shop. Other than that, it seems to be in pretty good shape and ran fine. Looking to get $250. John

01-30-2006, 02:56 AM	#2
69TowRig Senior Member Join Date: Jan 2005 Location: Raleigh, NC Posts: 894	Re: 350 SBC For Sale Hmm, tempting. Is it a 4-bolt main? I was saving up for a crate engine but a solid running 350 instead of my worn out, badly leaking, bad comp in #4 307 would be good, especially for low $$$. Where did it come from? Did you get to drive it? Is anything aftermarket on it or is it pretty much stock? __________________ -Chris Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid. Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals...

01-30-2006, 10:03 AM	#3
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	Re: 350 SBC For Sale It came with the truck I bought back in the summer but I don't know much about it. It ran pretty good for the past 5 months other than the things I listed on the first post. Bone stock, OE exhaust manifolds, most likely a 2 bolt main, but it does have a Q-jet 4 barrel intake. When I bought the truck, the previous owner told me it was a 283. For some reason, I believed him and never looked into it more. I figured rather than rebuild it, I would swap it with a rebuilt 350 which is exactly what I did. So imagine my surprise the other night when, after the engine was already out, I ran the casting number (3970014) and it came up as a 350. I could have kicked myself. Anyways, that's why I pulled it. Had I looked and realized what it was, I never would have swapped it out.

01-31-2006, 12:05 AM	#5
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	Re: 350 SBC For Sale Save for the crate and good luck in NC.

02-01-2006, 10:18 AM	#6
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	Re: 350 SBC For Sale ttt

01-30-2006, 06:17 PM	#4
69TowRig Senior Member Join Date: Jan 2005 Location: Raleigh, NC Posts: 894	Re: 350 SBC For Sale Man, sorry to get all excited about it. I really need to NOT get an engine for the K5 right now, I have to move to NC in 3 weeks. Plus I am still stuck on the idea of a crate engine. Sounds like someone else will be getting a pretty good deal though.

02-01-2006, 10:39 AM	#7
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: 350 SBC For Sale Ole Blue, what part of NC? __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

02-01-2006, 01:26 PM	#8
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	Re: 350 SBC For Sale Hey Luvlegs, I'm in Houston. 69TowRig is moving to NC. John

02-01-2006, 01:31 PM	#9
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: 350 SBC For Sale DOH! OK, - 69TowRig - what part of NC? hahahah (and it's only Tues....Wednesday! yeah that's it...wednesday...) I'll PM him and get outta the parts stuff here. __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew! Last edited by Luvlegs; 02-01-2006 at 01:34 PM.

02-01-2006, 01:39 PM	#10
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	Re: 350 SBC For Sale I know the feeling..

02-01-2006, 05:55 PM	#11
Rally Nova Registered User Join Date: May 2005 Location: Brazoria, Texas Posts: 60	Re: 350 SBC For Sale Can you post a picture of it? __________________ 1969 GMC C-1500 1972 Rally Nova 1988 Monte Carlo SS 2004 GMC 2500 Crew Cab

02-01-2006, 06:02 PM	#12
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	Re: 350 SBC For Sale Yeah, I know pics would help. I'll have some posted by this weekend. I can tell you this, it's the most beautiful color in the world: Chevy Orange...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.