Blazer with a 67/8 front end? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

prost68 · 02-02-2006, 11:44 PM

Hey guys. I am a newbie to the site. I don't have a blazer, but know where one is setting that needs a front cap that I might be able to buy. I am building a 67 and 68 truck and have a spare 67 front cap that is nearly perfect. Will this bolt right on if I use the 67 radiator support? I've seen a few 69-72 trucks with a 67/8 front and just assume that will work, but never seen a blazer with the older front. I am partial to the 67/8 front end, would that offend die-hard blazer fans?

**69TowRig** · 02-03-2006, 12:00 AM

It is purely a bolt-in affair (as long as you do use that Rad support). I think it would look sweet, don't worry about "offending" anyone. If anything it would be a little different than the norm.

**71swb4x4** · 02-03-2006, 12:01 AM

Doesn't offend me!!

*Medicanman71* · 02-03-2006, 01:11 AM

Killer!

krue · 02-03-2006, 08:24 AM

Should look pretty good!

smokekiki · 02-03-2006, 11:22 AM

4x4 with 67 front end

**raggedjim** · 02-03-2006, 11:33 AM

This is one of the most common changes to 2wd Blazers. I've seen more 2wd's with 67-68 front ends than I have oem... The 67-68 grill and sloped hood is a piece of art...

Rg

jkade · 02-03-2006, 07:01 PM

Name: Blazer 002.jpg
Views: 626
Size: 82.5 KB

I thought that was the way they came

LUV2XCLR8 · 02-03-2006, 07:04 PM

I'm doing my ROADSTER this way, GQ is 2 close to perfect to mess with

Quote:

Originally Posted by 71swb4x4

Doesn't offend me!!

What's your drop on that thing? Regular or Air?

hotrodhomi · 02-03-2006, 07:14 PM

raggedjim is that white and red Blazer yours? do you have any more pictures?

SLIMJIM · 02-03-2006, 07:26 PM

The white and red one that Roger posted is actually a Jimmy I'm pretty sure. I have seen it on ebay (if it's the same one). Dont know if it sold though. A very nice truck. Looks good with the Chevy front sheetmetal.

SLIMJIM

LUV2XCLR8 · 02-03-2006, 07:28 PM

^

on post #100

^

SLIMJIM · 02-03-2006, 07:32 PM

I just noticed......he he. Thanks. I would celebrate, however I am broke due to my trucks.

SLIMJIM

**71swb4x4** · 02-03-2006, 07:51 PM

Quote:

Originally Posted by LUV2XCLR8

What's your drop on that thing? Regular or Air?

Craig, I have 2.5" spindles with cut coils up front, and 3" blocks with heated coils in back. All of that is from the previous owner.
I now have air bags, which will be installed in the next month or two.

LUV2XCLR8 · 02-03-2006, 07:56 PM

I'm assuming the spindles will stay? but what about the blocks?

bouncytruck · 02-03-2006, 08:01 PM

It is a common modification on 2wd Blazers, but I've only seen a few 4wd's with the swap. Personally, I like the look on the 2wds, but it isn't my favorite mod on a 4wd.

LUV2XCLR8 · 02-03-2006, 08:22 PM

More

**71swb4x4** · 02-03-2006, 10:21 PM

Craig, the blocks will go.

prost68 · 02-04-2006, 12:41 AM

Thanks guys. I knew I would get some good pictures if there were many out there. These pics make me want to build a 2wd as well some day. That 67/8 front sure looks good low.
prost68

**raggedjim** · 02-04-2006, 01:04 AM

hotrodhomi, slimjim is right, it's a pic I found somewhere, none of the trucks I have are that nice (yet!)

Rg

LUV2XCLR8 · 02-04-2006, 09:40 AM

Quote:

Originally Posted by prost68

These pics make me want to build a 2wd as well some day. That 67/8 front sure looks good low.

This is the reason I borrowed $200 from a good friend, and a Towbar
from a good board member a few months back to go get a 2wd, I've
always wanted a 2wd, even though my 4wd is pretty nice, but I did
not think the 4wd would look as good w/ the 68 clip, pic's in sig link.

Alexis · 02-04-2006, 01:31 PM

aaahhh I love motivation.

FRENCHBLUE72 · 02-05-2006, 03:01 PM

That blue one is from H.A.N AND I THINK ALEX TOOK THAT PIC....

02-03-2006, 12:00 AM	#2
69TowRig Senior Member Join Date: Jan 2005 Location: Raleigh, NC Posts: 897	Re: Blazer with a 67/8 front end? It is purely a bolt-in affair (as long as you do use that Rad support). I think it would look sweet, don't worry about "offending" anyone. If anything it would be a little different than the norm. __________________ -Chris Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid. Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals...

02-03-2006, 12:01 AM	#3
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,499	Re: Blazer with a 67/8 front end? Doesn't offend me!! Attached Images __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

02-03-2006, 01:11 AM	#4
Medicanman71 Account Suspended Join Date: May 2005 Location: Where the Wild Things Are Posts: 696	Re: Blazer with a 67/8 front end? Killer!

02-03-2006, 08:24 AM	#5
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: Blazer with a 67/8 front end? Should look pretty good! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

02-03-2006, 11:22 AM	#6
smokekiki Mike Join Date: Jan 2003 Location: west chester pa Posts: 2,473	Re: Blazer with a 67/8 front end? 4x4 with 67 front end __________________ 70'c/10, 71 suburban4x4 402bb, 72suburban 4/6 drop, 72k/5 4x4 blazer 4" lift 35 tires Last edited by smokekiki; 02-03-2006 at 01:25 PM.

02-02-2006, 11:44 PM	#1
prost68 Registered User Join Date: Jan 2006 Location: Central Arkansas Posts: 14	Blazer with a 67/8 front end? Hey guys. I am a newbie to the site. I don't have a blazer, but know where one is setting that needs a front cap that I might be able to buy. I am building a 67 and 68 truck and have a spare 67 front cap that is nearly perfect. Will this bolt right on if I use the 67 radiator support? I've seen a few 69-72 trucks with a 67/8 front and just assume that will work, but never seen a blazer with the older front. I am partial to the 67/8 front end, would that offend die-hard blazer fans?

02-03-2006, 11:33 AM	#7
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,649	Re: Blazer with a 67/8 front end? This is one of the most common changes to 2wd Blazers. I've seen more 2wd's with 67-68 front ends than I have oem... The 67-68 grill and sloped hood is a piece of art... Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer - https://67-72chevytrucks.com/vboard/...d.php?t=856475 '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743 Last edited by raggedjim; 10-21-2009 at 03:34 PM.

02-03-2006, 07:01 PM	#8
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,517	Re: Blazer with a 67/8 front end? I thought that was the way they came

02-03-2006, 07:14 PM	#10
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: Blazer with a 67/8 front end? raggedjim is that white and red Blazer yours? do you have any more pictures? __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

02-03-2006, 07:26 PM	#11
SLIMJIM Registered User Join Date: Sep 2005 Location: Charleston, South Carolina Posts: 285	Re: Blazer with a 67/8 front end? The white and red one that Roger posted is actually a Jimmy I'm pretty sure. I have seen it on ebay (if it's the same one). Dont know if it sold though. A very nice truck. Looks good with the Chevy front sheetmetal. SLIMJIM __________________ 1970 Chevrolet Blazer 2 wheel drive - SOLD Last edited by SLIMJIM; 02-03-2006 at 07:26 PM.

02-03-2006, 07:28 PM	#12
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,474	Re: Blazer with a 67/8 front end? ^ on post #100 ^ __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

02-03-2006, 07:32 PM	#13
SLIMJIM Registered User Join Date: Sep 2005 Location: Charleston, South Carolina Posts: 285	Re: Blazer with a 67/8 front end? I just noticed......he he. Thanks. I would celebrate, however I am broke due to my trucks. SLIMJIM __________________ 1970 Chevrolet Blazer 2 wheel drive - SOLD Last edited by SLIMJIM; 02-03-2006 at 07:33 PM.

02-03-2006, 07:56 PM	#15
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,474	Re: Blazer with a 67/8 front end? I'm assuming the spindles will stay? but what about the blocks? __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

02-03-2006, 08:01 PM	#16
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: Blazer with a 67/8 front end? It is a common modification on 2wd Blazers, but I've only seen a few 4wd's with the swap. Personally, I like the look on the 2wds, but it isn't my favorite mod on a 4wd. Attached Images __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L Last edited by bouncytruck; 02-03-2006 at 08:04 PM.

02-03-2006, 08:22 PM	#17
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,474	Re: Blazer with a 67/8 front end? More Attached Images __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T



Register or Log In To remove these advertisements.

02-03-2006, 10:21 PM	#18
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,499	Re: Blazer with a 67/8 front end? Craig, the blocks will go. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

02-04-2006, 12:41 AM	#19
prost68 Registered User Join Date: Jan 2006 Location: Central Arkansas Posts: 14	Re: Blazer with a 67/8 front end? Thanks guys. I knew I would get some good pictures if there were many out there. These pics make me want to build a 2wd as well some day. That 67/8 front sure looks good low. prost68

02-04-2006, 01:04 AM	#20
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,649	Re: Blazer with a 67/8 front end? hotrodhomi, slimjim is right, it's a pic I found somewhere, none of the trucks I have are that nice (yet!) Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer - https://67-72chevytrucks.com/vboard/...d.php?t=856475 '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743

02-04-2006, 01:31 PM	#22
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,874	Re: Blazer with a 67/8 front end? aaahhh I love motivation.

02-05-2006, 03:01 PM	#23
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Blazer with a 67/8 front end? That blue one is from H.A.N AND I THINK ALEX TOOK THAT PIC.... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Register or Log In To remove these advertisements.